Is It Legal to Replace a Mercedes Logo with a Maybach Logo?

Do Cars Need Waxing in Winter?

Car waxing is necessary in winter. Here are the specific details about car waxing: 1. Function: After waxing the car body, the amount of raindrop adhesion can be reduced by 50% to 90%, protecting the paint and helping to prevent dust and high temperatures. 2. New car maintenance: New cars do not need polishing as the surface does not oxidize immediately, and polishing may damage the paint, having the opposite effect. For new car maintenance, simply clean the car thoroughly and apply wax directly without polishing. 3. Durability: Spray waxing has relatively short durability, generally lasting about 2 months. For cars over a year old with severe oxidation or obvious scratches, polishing is required before spray waxing to remove the oxidized layer on the car body and maintain the paint's brightness.

4

2

Share

Where is the engine number located on the Lynk & Co 03?

The engine number of the Lynk & Co 03 is located under the front passenger seat. The engine number, also known as the engine model, is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or company practices, and the attributes of the engine. This code represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine. Taking the 2021 Lynk & Co 03 as an example, it is a compact car with the following dimensions: length 4639mm, width 1840mm, height 1472mm, wheelbase 2730mm, and tire size 205/60r16.

16

3

Share

What is the method for adjusting rearview mirrors while driving?

Vehicle rearview mirrors while driving is adjusted as follows: 1. Adjust the center rearview mirror to position the horizon image at the center of the mirror; 2. Adjust the left side exterior rearview mirror so that the image occupies the right quarter of the mirror; 3. Adjust the right side exterior rearview mirror to position the horizon image at two-thirds of the mirror's height, with the right side of the vehicle occupying the left quarter of the mirror. Vehicle rearview mirrors are located on both the left and right sides of the car's front and inside the car's interior. They reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, thereby expanding the driver's field of vision.

5

3

Share

What are the operating steps for the Touareg's lifting function?

The operating steps for the Touareg's lifting function are: 1. Locate the lifting control switch in the cockpit center console as indicated in the diagram, then press the one-touch start switch on the vehicle's center console; 2. Rotate the control knob to adjust to the desired position and press the button to confirm. Taking the 2021 Touareg as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 4878mm, width 1984mm, height 1717mm, wheelbase 2899mm, and a fuel tank capacity of 90 liters. The 2021 Touareg is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 245PS, maximum power of 180kW, maximum torque of 370Nm, and is paired with an 8-speed automatic transmission.

1

2

Share

Why does the oil light come on and the engine make noise?

The reasons for the oil light coming on and the engine making noise are: 1. Insufficient oil level; 2. Damaged oil pump components with excessive clearance; 3. Improper clearance between the crankshaft and big/small bearings; 4. Clogged oil filter or oil suction screen; 5. Faulty or damaged oil return valve; 6. Main oil gallery return valve spring stuck by debris causing poor sealing. The solutions for the oil light coming on and the engine making noise are: 1. Add oil promptly; 2. Replace the oil pump; 3. Adjust the clearance between the crankshaft and big/small bearings; 4. Replace the oil filter; 5. Clean the oil passages to ensure smooth flow; 6. Remove engine carbon deposits; 7. Replace the oil return valve.

8

4

Share

What Causes False Alarms in Front Parking Sensors When No Obstacles Are Present?

False alarms from front parking sensors when no obstacles are present usually indicate a malfunction in one of the two center-front sensors, requiring repair. Below are specific causes of this issue: 1. Sensor-related problems: The sensor mounting hole may be too small or tight, or the sensor might be installed on an iron or rigid bumper. 2. Sensor contamination: Paint overspray, snow accumulation, ice buildup, or other foreign materials on the sensor surface can interfere with its operation. 3. Poor sensor characteristics: The sensor may have inferior performance or operate in excessively low ambient temperatures. 4. Sensor failure: Front parking sensors consist of ultrasonic sensors, a control unit, and a display. They alert drivers about surrounding obstacles through audible signals or visual displays, helping eliminate blind spots and unclear visibility to enhance driving safety. A faulty sensor disrupts normal system operation, resulting in false alarms.

20

0

Share

Is It Legal to Replace a Mercedes Logo with a Maybach Logo?

Do Cars Need Waxing in Winter?

Where is the engine number located on the Lynk & Co 03?

What is the method for adjusting rearview mirrors while driving?

What are the operating steps for the Touareg's lifting function?

Why does the oil light come on and the engine make noise?

What Causes False Alarms in Front Parking Sensors When No Obstacles Are Present?

What is the difference between 5w-40 and 5w-30?

Are all China VI vehicles three-cylinder?

How Often Should a New BMW Get Its First Maintenance?

How many kilometers can the Baojun 310 travel on a full tank?