Is it illegal to remove the characters on the back of a car?

1 Answers
Cara
07/25/25 8:13am
It is not illegal to remove the characters on the back of a car. However, removing the car's trademark is illegal. After removing the characters on the rear of the car, you cannot replace them with characters from another car's trademark, as this would constitute illegal modification and is considered a violation. Below are some related illegal modification operations: 1. Exterior modifications: Changing the car's exterior logos, etc.; altering the vehicle's external contour dimensions, wheelbase, or axle spacing, as well as changing the number of passengers or seating capacity in the driver's compartment. 2. Interior modifications: Modifying interior facilities, including replacing the steering wheel, installing sports seats, adding instrument equipment, or soundproofing materials, etc. 3. Power system modifications: Modifying the exhaust pipe, turbo, etc., to exploit the gap between the engine's design power and actual power, thereby increasing instantaneous displacement.
Was this review help?
3
3
Share
More Forum Discussions

Why Does Glass Shatter Spontaneously?

The causes of automotive glass shattering are as follows: 1. Damage: Scratches, surface corrosion, or chipped edges on the glass surface or edges due to careless handling, installation, or maintenance can easily disrupt the glass's stress balance, leading to spontaneous shattering of tempered glass. 2. During installation: If the installation gap is too small or the glass comes into direct contact with the frame, the differing expansion coefficients of the glass and frame under sunlight can create pressure on the edges or corners of the glass, inducing shattering. 3. Glass processing factors: Glass that has been drilled or had corners cut is more prone to shattering. 4. Design: Wind disasters such as strong typhoons can cause the wind resistance design to fail, resulting in glass shattering.
14
5
Share

Why are some license plates solid green?

Green license plates represent urban area-specific vehicles, namely new energy vehicles. The special emblem for new energy vehicle license plates features a green background overall, with an electric plug pattern on the right side of the emblem, and a colored section on the left resembling the English letter "E" (electric), symbolizing electricity and new energy. Below is more related information: 1. New Energy Vehicles: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles and new technologies and structures. These include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, and other new energy vehicles. 2. Special License Plates for New Energy Vehicles: Special license plates for new energy vehicles are divided into small new energy vehicle license plates and large new energy vehicle license plates. The outer dimensions of new energy vehicle license plates are 480mm×140mm, with small new energy vehicle license plates featuring a gradient green color (green background with black characters), and large new energy vehicle license plates featuring a yellow-green dual-color scheme (green background with black characters). Compared to ordinary vehicle license plates, new energy vehicle license plate numbers have been increased from 5 digits to 6 digits, allowing for more vehicles to be accommodated in the numbering system, keeping pace with societal development.
17
1
Share

Is the BYD Tang a seven-seater?

BYD Tang is available in both seven-seater and five-seater versions. The Tang is a mid-size SUV under the BYD brand, featuring a relatively large body size and spacious interior. The entire BYD Tang series is equipped with a 2.0-liter turbocharged engine, model number BYD487ZQB, with a maximum power output of 141kw. Here is a brief introduction to the BYD Tang: 1. Exterior: The BYD Tang adopts a new Dragon Face design, which is also the signature design of BYD's family. The vehicle features the Chinese character "Tang" as its emblem in the middle of the front grille, blending Chinese elements with a sense of fashion and trend. The side profile is also very attractive, with the roofline sloping downward from front to back, presenting a stylish and sporty design. In terms of dimensions, the vehicle measures 4870/1940/1720mm in length, width, and height, with a wheelbase of 2820mm. 2. Interior: The BYD Tang features a simple and elegant design, with a well-shaped steering wheel that offers a comfortable grip. The most eye-catching element is the large central control screen. The configuration is as rich as ever, including a multi-function steering wheel, electronic parking brake, one-key start, automatic headlights, remote driving key, multi-terrain selection system, hill descent control, full LCD instrument panel, and electric seat adjustment for both the driver and front passenger.
15
1
Share

How long does it take to order a CFMOTO 250SR Flame Orange?

How long it takes to order a CFMOTO 250SR Flame Orange depends on the region and specific dealership. The CFMOTO 250SR has garnered significant attention under CFMOTO's promotion, thanks to its highly explosive engine, which provides users with immense satisfaction. As a result, it has successfully secured a place in the market and is hailed as the "King of Cost-Effectiveness in the Motorcycle World." Below are the detailed specifications of the CFMOTO 250SR: 1. Exterior Design: The sharp front-end design gives the entire face a commanding presence. Beyond the front and rear, the side profile is equally impressive, with smooth lines that exude a sense of fashionable beauty. The slightly tapered rear accentuates the rider's understated yet refined quality. The tail lights feature the latest design style, creating a more dynamic effect when illuminated. The TFT instrument panel has a conventional layout but offers excellent display quality. The mirrors boast a high-quality fiber texture with a dual-tone design, providing a broad field of view. However, the wheel design is somewhat mediocre, lacking a bit of muscular appeal. 2. Handling: The CFMOTO 250SR is equipped with a single-cylinder, liquid-cooled engine with a displacement of 249cc, paired with an electronic fuel injection system. It achieves a leading torque value of 22 Nm in its class, delivering a maximum power of 20.5KW. The transmission features a 6-speed chain drive, consistent with mainstream models, further enhancing its smooth power delivery. Through continuous optimization by CFMOTO, the transmission system and engine work in perfect harmony. The throttle response is exceptionally prompt, creating a seamless connection with the rider's right hand, greatly satisfying the younger generation's pursuit of "speed."
9
4
Share

How many ways are there to install bumper strips?

There are three main methods for installing bumper strips: embedded, flat, and fixed. Below are more details: 1. Embedded: During vehicle body molding, corresponding grooves are reserved, and the bumper strips are embedded into them. 2. Flat: The vehicle body is made flat, with several holes reserved in corresponding positions, and the corresponding posts of the bumper strips are inserted and adhered. 3. Fixed: The bumper strips and the vehicle body are secured together using nuts and bolts. 4. Adhesive: Generally, 3M adhesive, silicone sealant, or 205 adhesive are recommended. However, there are drawbacks: if the adhesive layer is too thick, it may result in incomplete adhesion; poor adhesive performance may lead to weak, non-durable bonding. When bumper strips age, loosen, crack, or fall off, they should be promptly purchased and replaced with new ones.
18
2
Share

What is the simplest way to lower the car body?

Here are the methods to lower the car body: 1. Reduce the height of the shock absorber assembly. 2. Appropriately decrease the size of the rims and tires, which will lower the car's chassis. 3. Replace with wider and flatter tires. 4. SPR uses a dual-mode shock absorber, and the bracket that adjusts the tire angle also needs to be replaced. Here is some additional information: 1. Disadvantages of lowering the car body: After lowering the car body, the suspension geometry carefully set by the original engineers is disrupted, and the stress on the suspension components changes, which may make them more prone to damage and produce unpleasant noises. 2. Advantages: Lowering the car body reduces the center of gravity and decreases the vehicle's body roll. However, reduced body roll does not necessarily mean better handling. Good handling means that during cornering, the tires maintain a larger contact area with the ground, providing stronger grip, which is what defines good handling.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.