Is It Illegal to Remove the Car Emblem?

Does a Faulty Oxygen Sensor Affect Engine Performance?

When the rear oxygen sensor in a car fails, the engine may exhibit symptoms such as unstable idling, misfiring, and surging. Therefore, it is essential to promptly address the issue or replace the sensor. A faulty oxygen sensor prevents the electronic fuel injection system's computer from receiving information about the oxygen concentration in the exhaust pipe, making it unable to perform feedback control on the air-fuel ratio. This can lead to increased fuel consumption and higher exhaust emissions. Additional information: To diagnose the issue, remove the oxygen sensor from the exhaust pipe and check if the vent holes on the sensor housing are clogged or if the ceramic core is damaged. If any damage is found, the oxygen sensor should be replaced. The condition of the oxygen sensor can also be assessed by observing the color of its tip, as follows: 1. Light gray tip: This indicates a normal condition. 2. White tip: Caused by silicon contamination, requiring immediate replacement of the sensor. 3. Brown tip: Caused by lead contamination; if severe, the sensor must also be replaced. 4. Black tip: Caused by carbon buildup, which can usually be cleared automatically after addressing the engine's carbon deposit issue.

13

3

Share

How to Determine Whether Coolant Needs to Be Replaced

Here are the methods to determine whether coolant needs to be replaced: 1. If the temperature gauge is normal, the coolant does not need to be replaced; 2. If the coolant reservoir is low on coolant, simply top it up; 3. If the engine temperature is high, drain the existing coolant, flush the radiator, and then refill with new coolant. Additional information: 1. The coolant in the vehicle's engine radiator is generally replaced every two years or every 40,000 kilometers traveled. Taxis should be replaced more frequently. When adding coolant, ensure the product is within its validity period. When replacing, drain all the old coolant, thoroughly clean the cooling system, and then refill with new coolant. 2. When the coolant level is low, use the same brand and model of coolant to top it up. Coolant is an indispensable part of a car engine. It circulates within the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to operate at normal working temperatures. When the coolant level is insufficient, the engine temperature will rise excessively, potentially causing damage to engine components. Once the owner notices insufficient coolant, it should be promptly topped up.

17

1

Share

Should High Beams Be Used on Highways?

High beams must be used when driving on highways at night. Here are the relevant details: 1. The illumination distance of a car's low beams is generally only about 40 meters. If driving on a highway at night at a speed of 100 km/h, the distance traveled per second is approximately 27 meters. This means that if low beams are used, once an abnormal situation arises ahead, the reaction time left for the driver is less than two seconds, which is insufficient for the driver to detect the target and perform evasive maneuvers. High beams, on the other hand, have a much longer illumination range, reaching about 200 meters, providing ample time to react to potential risks. 2. Using high beams on highways may affect the vehicle in front, but most cars are equipped with anti-glare rearview mirrors, minimizing the impact. Additionally, it is considerate to temporarily switch to low beams when approaching another vehicle, reflecting good driving etiquette.

1

3

Share

What should you pay attention to when inspecting a new car upon delivery?

When inspecting a new car upon delivery, pay attention to the following: 1. The PDI form will contain various basic vehicle parameters such as inspection date, mileage, chassis number, model number, engine number, transmission number, and interior code. Verify these parameters; 2. Exterior and interior inspection mainly involves checking for scratches, paint chips, and dents on the exterior, while the interior inspection ensures all included items are present, such as the user manual, warranty manual, and tools; 3. In the engine compartment, primarily check the levels of engine oil, coolant, windshield washer fluid, and brake fluid to ensure they are sufficient. Also, inspect the pipes and connectors to ensure they are tight and not loose; 4. Request the 4S store to lift the car to inspect the undercarriage. Check for any oil or fluid leaks from the engine or transmission, look for rust on undercarriage components, and you can also ask the 4S store staff to tighten the suspension bolts with additional force.

18

0

Share

What are the common reasons for a car having no warm air but only cold air?

Possible reasons for a car having no warm air but only cold air are as follows: 1. First, determine whether the air conditioning vents are blowing air—whether it's cold air, no air, or air that isn't warm. 2. If there is no air, it may be due to a damaged blower motor or a clogged air filter. 2. If there is air but it isn't warm, it could be due to a faulty blend door actuator or a stuck air flap. Below are the steps to diagnose why the warm air isn't heating: 1. First, check whether the engine coolant temperature is normal. If it remains at a low temperature and doesn't reach the operating temperature, the warm air will definitely not be hot. In this case, focus on checking whether the thermostat is stuck in the open position or whether the coolant temperature sensor signal is accurate. Repair or replace the faulty component as needed. 2. Pay attention to whether there is a significant temperature difference between the inlet and outlet hoses of the heater core. If such a difference exists, it is certain that the heater core is clogged and needs to be disassembled, cleaned, or replaced. 3. Check whether the coolant flow rate and temperature entering the heater core meet the requirements. Temperature differences can be measured using an infrared thermometer, while flow conditions can be assessed through diagnostic data and fault logs from a scan tool. Common issues include a faulty water pump or damaged heater flow valve and coolant circulation valve. 4. Check whether there is air trapped in the cooling system. A common cause is failing to bleed the system after replacing the coolant. A more unusual cause could be a damaged cylinder head gasket. Use standard coolant bleeding methods to confirm further.

17

2

Share

What Does Vehicle Damage Insurance Mean?

Vehicle Damage Insurance is a type of commercial auto insurance where the insurer compensates within reasonable limits for damage to the insured vehicle caused by an accident while being driven by the policyholder or an authorized driver. The insured amount for Vehicle Damage Insurance can be determined based on the insurance value or actual value at the time of purchase, or negotiated between the policyholder and the insurer, but the insured amount must not exceed the insurance value. The following causes may result in compensation under Vehicle Damage Insurance: 1. Collision, overturning, falling; 2. Fire, explosion, spontaneous combustion; 3. Falling or collapsing of external objects; 4. Storm, tornado; 5. Lightning, hailstorm, heavy rain, flood, tsunami; 6. Ground collapse, ice collapse, cliff collapse, avalanche, mudslide, landslide; 7. Natural disasters affecting the ferry transporting the insured vehicle (limited to cases where the driver is accompanying the vehicle).

13

3

Share

Is It Illegal to Remove the Car Emblem?

Does a Faulty Oxygen Sensor Affect Engine Performance?

How to Determine Whether Coolant Needs to Be Replaced

Should High Beams Be Used on Highways?

What should you pay attention to when inspecting a new car upon delivery?

What are the common reasons for a car having no warm air but only cold air?

What Does Vehicle Damage Insurance Mean?

Can Antifreeze Be Mixed?

Which gear is for forward in an automatic transmission?

What Causes Car Window Glass to Not Roll Up?

What is the standard tire pressure for car tires?