Is it illegal to modify motor vehicle seats?

How to remove the wiper of Sylphy?

Sylphy wiper removal method: Lift the wiper arm from the windshield, press and hold the release lock pin, then move the wiper blade along the wiper arm to remove the wiper. Insert the new wiper blade into the wiper arm until you hear a click. Here are some relevant information about wipers: 1. The wiper, also known as a windshield wiper, is a device used to wipe off raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and increase driving safety. 2. Due to legal requirements, almost all vehicles are equipped with wipers. Rear windows of vehicles such as hatchbacks and SUVs are also equipped with wipers. 3. In addition to cars, other means of transportation are also equipped with wipers, such as trains and trams. Some engineering machinery, such as cranes, are also equipped with wipers.

7

4

Share

Can the McLaren 720S be a convertible?

McLaren 720S does have a convertible version. Here are some relevant introductions about the McLaren 720S: 1. The McLaren 720S can accelerate from 0-100 km/h in just 2.7 seconds and is equipped with butterfly doors that reflect the style of a supercar. 2. The McLaren 720S uses a 4.0-liter twin-turbocharged V8 engine with the code name M840T. This engine has a maximum power of 529 kW and a maximum torque of 770 Nm. The engine is paired with a 7-speed dual-clutch transmission, and it can output maximum power at 7500 rpm and maximum torque between 5500 to 6500 rpm.

2

1

Share

Can a car be driven on the road without a vehicle license but with a temporary license plate?

With a temporary license plate and insurance, you can drive on the road even without a vehicle license. Of course, the vehicle must be a regular motor vehicle, and the temporary license plate must be within its validity period. When driving, you must also carry your driver's license, the original vehicle invoice, and the certificate of conformity in case of inspection. The use of temporary license plates is subject to time and regional restrictions. You can apply for a temporary license plate from the local vehicle management office under any of the following conditions: 1. When driving the vehicle from the place of purchase to the place of use, you need to apply for a temporary license plate at the vehicle management office in the place of purchase. 2. When transferring the vehicle's registration and the official license plate has been surrendered, you need to apply for a temporary license plate at the local vehicle management office to drive back to your home location. 3. If a new car in your area has not yet obtained an official license plate and needs to be driven to another location for modifications, you must apply for a temporary license plate locally. After modifications are completed, apply for a temporary license plate at the local office to drive back to the original area. 4. For owners who have not yet fixed their vehicle registration and need to test drive temporarily.

4

0

Share

How to Fold the Rearview Mirrors?

Different car models have different methods for folding the rearview mirrors. Generally, pressing the automatic folding button or rotating the button to the automatic folding position will cause both exterior rearview mirrors to fold simultaneously. The folding of rearview mirrors can be categorized into manual and electric types. Electric rearview mirrors are typically folded automatically via an operation button located on the driver-side door or the center console. There are two types of folding rearview mirrors. The first is manual. When folding is required, the driver must reach out the window or exit the vehicle to fold them, which is inconvenient and unsafe. Nowadays, manual folding mirrors are rare. The other type is electric, which is the more common one. Its advantage is that the driver can fold them from inside the car, and the mirrors will automatically unfold when the vehicle starts. Industry Standards and Features of Car Rearview Mirrors Car rearview mirrors are important safety components, and their mirror surfaces and designs are quite particular. Therefore, the quality and installation of rearview mirrors are subject to corresponding industry standards and cannot be altered arbitrarily. The exterior rearview mirrors reflect the rear side of the car, the lower mirrors reflect the front and bottom of the car, and the interior rearview mirror shows the situation behind and inside the car. Mirrors for different purposes have varying structures. Rearview mirror surfaces generally come in two types: one is a flat mirror, which, as the name suggests, has a flat surface, indicated by an "infinite radius of curvature R." Like ordinary household mirrors, it provides an image that matches the visual size. This type of flat mirror is often used as the interior rearview mirror.

6

2

Share

What are the symptoms of a faulty release bearing?

If the release bearing is faulty, after starting the engine, lightly press the clutch pedal. When the free travel is just eliminated, a "rustling" or "squeaking" sound will occur. If the sound disappears when you continue to press the clutch pedal, it is not a problem with the release bearing. If the sound persists, it is the release bearing making the noise. Below are some related maintenance tips for the release bearing: 1. Follow operating procedures to avoid the clutch being in a semi-engaged or semi-disengaged state, and reduce the frequency of clutch usage. 2. Pay attention to maintenance. Periodically or during inspection and maintenance, remove the release bearing and clean out impurities. Use the boiling method to soak it in lubricating oil, ensuring it has sufficient lubricant. Pay attention to the clutch release lever to ensure the return spring's elasticity meets specifications. 3. Minimize the number of engagements and disengagements to reduce impact loads. Press lightly, release smoothly, and move your foot away from the clutch pedal to ensure smooth engagement and disengagement. If the release bearing is severely worn or burnt out, it is recommended to replace it. Ensure thorough lubrication before installation.

17

0

Share

What to Do When the Car Key Cannot Be Pulled Out?

Reasons and solutions for a car key that cannot be pulled out are as follows: 1. Key cannot be pulled out after turning off the engine: The reason for this is that the gear is not fully returned to the P position. Although it may appear to be in place, it may not have triggered the electronic sensor, or there may be obstacles like coins in the gear slot preventing it from returning fully. In this case, the owner should check for any obstructions in the gear slot, remove them, restart the car, and shift the gear again to ensure it is fully returned to position. The key can then be pulled out. 2. Steering wheel not straightened when parking, causing the steering wheel to lock: In this situation, while gently turning the key with your right hand, wiggle the steering wheel left and right with your left hand, and the key can then be pulled out. 3. Poor contact due to water in the key: In this case, do not pull hard. Try using a gentle force several times to pull the key out. If the key gets wet, avoid shaking it vigorously or pressing the buttons, as this can cause water to seep into other important circuits. Also, do not use the remote to unlock the car immediately, as this may damage the circuit board. The correct approach is to open the key casing, lay it flat, and use a hairdryer to dry it before further inspection.

11

0

Share

Is it illegal to modify motor vehicle seats?

How to remove the wiper of Sylphy?

Can the McLaren 720S be a convertible?

Can a car be driven on the road without a vehicle license but with a temporary license plate?

How to Fold the Rearview Mirrors?

What are the symptoms of a faulty release bearing?

What to Do When the Car Key Cannot Be Pulled Out?

Does painting a car on rainy days have any impact?

What Causes the Yellow Engine Light to Illuminate?

How to Turn On the Fog Lights on the 10th Generation Civic?

What Stickers Should Be Placed on the Car's Front Windshield?