Is It Illegal to Install Fog Lights on a Base Model Car?

1 Answers
LaMalachi
07/29/25 3:44pm
Installing fog lights on a car is considered a safety feature, so it is not illegal to add fog lights to a base model car. Since light can increase visibility distance, especially the strong light penetration of yellow anti-fog lights, they can improve the visibility for drivers and other traffic participants in low-visibility conditions such as fog, where driver sight is limited. Therefore, installing fog lights on a base model car is legal and beneficial for safety. Considerations for installing fog lights: 1. Professional installation: Fog lights must be installed by professional technicians at a reputable auto repair shop. Do not attempt to install them yourself, as incorrect wiring can lead to other issues. 2. Choosing fog lights: The purpose of installing fog lights is to enhance safety, not for aesthetic appeal. Some owners install blue front fog lights, which may result in being stopped by traffic police. 3. Modification registration: After installing fog lights, the vehicle's appearance must be promptly registered. Failure to do so may cause discrepancies during annual inspections, and registration can help avoid unnecessary complications.
Was this review help?
18
4
Share
More Forum Discussions

What Equipment Composes the Automotive Electrical System?

Automotive electrical system equipment consists of: 1. Charging system: composed of the generator, regulator, battery, and charging indicator light; 2. Starting system: mainly includes the starter, starter relay, ignition switch, starting protection device, and starting preheating device; 3. Ignition system: primarily consists of the distributor, ignition coil, spark plugs, and high-voltage wires; 4. Lighting and signaling devices: including various lamps, signal lights, horns, and buzzers; 5. Instruments: mainly the fuel gauge, oil pressure gauge, water temperature gauge, and speedometer; 6. Auxiliary equipment: includes windshield wipers and washers, windshield defrosters, air conditioning, audio systems, central locking, power windows, and power mirrors.
19
1
Share

What is the bolt pattern of the Baojun 510 wheel hub?

The bolt pattern of the Baojun 510 wheel hub is 5/114.3. Bolt Pattern: The professional term for the bolt pattern is Pitch Circle Diameter (PCD), which refers to the diameter of the circle formed by the centers of the wheel's lug holes. Most wheel hubs have either 5 or 4 bolt holes, and the distance between these bolts varies. Hence, you see designations like 4X103, 5X114.3, and 5X112. Taking 5X114.3 as an example, it means the PCD of this wheel hub is 114.3mm with 5 bolt holes. Check the tire wear condition: This includes checking whether the tire has worn down to the wear indicators and whether there is uneven wear. For tires with severe abnormal wear, the cause should be identified promptly, and the tire should be replaced. Check for debris between the treads: If any debris is found, it is best to remove it. Otherwise, these embedded objects can cause damage to the tire if left between the treads for an extended period.
3
5
Share

How to Replace the Headlight Bulb of Arrizo 5?

The steps to replace the headlight bulb of Arrizo 5 are: 1. Wait for the engine to completely cool down after turning off the ignition; 2. Open the engine hood; 3. Unscrew the headlight dust cover along the thread direction; 4. Pinch the wire clip next to the base, remove the bulb after the clip is released, and then install the prepared bulb. Car headlights, also known as car front lights or car LED daytime running lights, are closely related to safe driving at night or in bad weather conditions, including high beams and low beams, as well as turn signals. Car headlights are divided into high beams and low beams. Use low beams when driving on well-lit urban roads, and high beams can be used on rural roads without streetlights. When encountering oncoming vehicles or being overtaken by rear vehicles, promptly switch to low beams to prevent the glare of high beams from affecting the other party.
15
4
Share

How to engage reverse gear in a Volkswagen manual transmission?

To engage reverse gear in a Volkswagen manual transmission, follow these steps: 1. After getting into the car, press the brake and clutch pedals. 2. Turn the key to power on and start the vehicle. 3. While keeping the brake and clutch pedals pressed, use your right hand to push down the gear shift lever, move it to the left, and then push it forward all the way. 4. Press the button on top of the handbrake and lower the handbrake. Volkswagen manual transmission models include: Santana, Jetta, Lavida, Polo, Sagitar, Golf, Touran, Bora, Lamando, Golf Sportsvan, Viloran, Magotan, Sagitar, Touareg, Tiguan, etc. Taking the 2021 Comfort Edition Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, fuel tank capacity 51 liters, and trunk capacity 510 liters.
14
0
Share

What is the 'A' behind the handbrake of the Audi A6L?

"A" refers to: the Auto-Hold button. After pressing this button, when waiting on a slope, stepping on the brake and releasing your foot will automatically engage the brake. A green P light on the dashboard will illuminate, preventing the car from rolling, and you can simply press the accelerator to start moving. How Auto-Hold works: When the vehicle is temporarily stopped and needs to restart after a short period, this type of parking is handled by the ESP-controlled brakes. The computer uses a series of sensors to measure the vehicle's levelness and wheel torque, determining any tendency for the vehicle to roll, and applies an appropriate braking force to keep the vehicle stationary. This braking force is just enough to prevent the vehicle from moving without being too strong, ensuring there is no severe lurch forward when pressing the accelerator again. Meaning of the Auto-Hold system: The Auto-Hold system is an automatic function that replaces the handbrake. Once activated, for example, when stopping at a traffic light, it eliminates the need to pull the handbrake. This function is particularly useful on slopes and during frequent stops and starts.
2
1
Share

What does it mean when a vehicle displays a code?

When a vehicle displays a code, it indicates that the driver is being alerted about a lack of antifreeze in the engine cooling system, and antifreeze needs to be added. The functions of antifreeze: 1. It provides anti-corrosion protection for components of the cooling system; 2. It prevents scale buildup, avoiding a reduction in the radiator's cooling efficiency; 3. It ensures the engine operates within the normal temperature range. The hazards of not replacing expired antifreeze: 1. It can cause the water in the antifreeze to evaporate, altering the antifreeze's freezing point and affecting its performance; 2. It fails to provide anti-corrosion, anti-rust, and rust-removal functions for the engine, impacting the engine's lifespan; 3. It increases viscosity, reducing cooling efficiency.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.