Is it easy to replace the wiring harness of the Mercedes-Benz oil pump?

2 Answers
LorenzoAnn
07/23/25 7:58pm
Not very easy to replace. It is recommended to go to a car repair shop for assistance. Below are specific details about Beijing Benz: Historical Background: Beijing Benz Automotive Co., Ltd. (referred to as Beijing Benz) is a joint venture established by Beijing Automotive Group Co., Ltd., Daimler AG, and Daimler Greater China Ltd. It was officially founded on August 8, 2005. The Beijing Benz factory is located in the Beijing Economic-Technological Development Area. Main Models: The primary models under Beijing Benz include the Mercedes-Benz A-Class, Mercedes-Benz GLA, Mercedes-Benz C-Class, Mercedes-Benz GLC, Mercedes-Benz E-Class, Mercedes-Benz E-Class New Energy, and Mercedes-Benz EQC. Special Features: It has an annual production capacity of 100,000 vehicles. As one of China's most advanced world-class automotive manufacturers, BBAC defines new benchmarks for modern automotive enterprises with its five major characteristics: an international management team, outstanding products, strict quality control, excellent ecological environment, and highly skilled technical workers.
Was this review help?
4
2
Share
OKaden
08/10/25 5:54pm
Personally, I think replacing the oil pump wiring harness on a Mercedes is no easy task—it requires some professional expertise. You’ll need to disconnect the battery to avoid electric shock, open the engine hood, and carefully remove the covering components before you can access the wiring harness connector. Mercedes models are designed with precision, and the harness is usually hidden. If you’re unfamiliar with the layout, it’s easy to accidentally damage other wires or disrupt the sealing ring, leading to oil leaks. Additionally, Mercedes’ electronic systems are complex, and after replacement, you might need a diagnostic tool to reset the ECU module; otherwise, the oil pump may malfunction. I’ve seen several cases where DIY beginners struggled for hours only to make mistakes, ultimately requiring costly repairs. For peace of mind, it’s safer to take it directly to a dealership or professional repair shop—though pricier, it saves hassle and prevents future issues. Regular inspections of the oil system and wiring aging can also help avoid frequent replacements, making it more cost-effective in the long run.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Open the Trunk of the Outlander?

The method to open the trunk of the Outlander is: locate the trunk switch on the left side of the center console next to the driver's seat, and press the button to open the trunk. The trunk volume of the Mitsubishi Outlander varies depending on the degree to which the rear seats are folded down, with a maximum volume of 800L. The Outlander is a compact 5-door, 5-seat SUV with dimensions of 4705mm in length, 1810mm in width, and 1710mm in height, a wheelbase of 2670mm, and a fuel tank capacity of 63L. This vehicle is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 122 kW and a maximum torque of 201 Nm, with a front-engine, front-wheel-drive configuration.
11
2
Share

What are the differences between front-wheel drive and full-time four-wheel drive?

Here are the differences between front-wheel drive and full-time four-wheel drive: 1. Different principles: Full-time four-wheel drive distributes driving force to all four wheels through a flexibly connected central differential and independent front and rear axle differentials. All-wheel drive uses computers and various continuously improved sensors to constantly assess the dynamic traction of tires on the ground and the driver's intentions, actively controlling the differential state of the vehicle's differential to balance the driving force of each wheel and optimize the vehicle's performance. 2. Different characteristics: Full-time four-wheel drive provides greater traction in all road conditions, especially in slippery and winter conditions; it enhances starting and climbing capabilities regardless of load conditions. All-wheel drive: To maximize the transmission of driving force, the AWD system fully utilizes the vehicle's weight to improve driving force, enhancing the vehicle's dynamic performance on various road surfaces.
16
4
Share

What to Do When an Automatic Transmission Car Runs Out of Battery?

When an automatic transmission car runs out of battery, you can use jumper cables to start it. The method for connecting car battery jumper cables is as follows: Bring the fronts of the two cars close together, connect one end of the red cable to the positive terminal of the rescued car's battery and the other end to the positive terminal of the rescuing car. Connect the black cable to the negative terminal of the rescuing car and the other end to the negative terminal of the rescued car. After the cables are connected, start the rescuing car first, then start the rescued car. When operating the battery, both the vehicle and the rescuing car must remain turned off. The order for connecting the jumper cables is to first connect the positive terminal of the dead battery to the positive terminal of the rescuing car, then connect the negative terminal of the dead battery to the negative terminal of the rescuing car.
14
4
Share

What does the English name 'line' mean?

line is a model kit under the Volkswagen brand. Below is an introduction to model kits: 1. In fact, there are many standard car models equipped with sport kits in the automotive industry, such as BMW's M Sport models, Mercedes-Benz's AMG Sport models, and Audi's S-line models. These models are all equipped with sport kits. Generally, sport kits include exterior and interior components. Exterior components consist of front and rear bumpers, side skirts, brake calipers, wheels, spoilers, etc. Interior components include seats, seat belts, steering wheels, etc. 2. Models equipped with sport kits appear more sporty in both exterior and interior compared to standard models, making them highly popular among young consumers. The cost of equipping sport kits is relatively low because models with sport kits share the same powertrain and chassis as standard models, with only differences in exterior and interior styling.
10
0
Share

Is making a U-turn from the second left-turn lane considered a traffic violation?

Making a U-turn from the second left-turn lane is considered a traffic violation. When a vehicle is stopped in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, vehicles are only allowed to make U-turns from the innermost left-turn lane. Scenarios where U-turns are prohibited include: U-turns are prohibited where there are "No U-turn" signs or "No Left Turn" signs: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. A U-turn is an extension of a left turn, so if there is a "No Left Turn" sign at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, the vehicle must cross the crosswalk before making the U-turn and must not make the U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even if the vehicle is in the leftmost lane, U-turns are not allowed if there is no sign permitting left turns. U-turns are prohibited within the second left-turn lane: When a vehicle is stopped in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, vehicles are only allowed to make U-turns from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, the vehicle must wait for the green light and cross the stop line before making the U-turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and 12 demerit points. If you miss an exit on the highway, continue driving to the next exit and leave the highway. Do not attempt an illegal U-turn.
6
5
Share

How to Tell If Your Car's Undercarriage Has Been Scraped?

You can directly use a lift to raise the vehicle and inspect the undercarriage for any scratches or deformations, which will help determine if it has been damaged. Methods to prevent undercarriage scrapes and damage are as follows: 1. Apply Undercarriage Coating: Automotive undercarriage coating can be sprayed on exposed areas such as the vehicle's undercarriage, wheel hubs, fuel tank, lower body panels, and luggage compartment. It quickly dries to form a sturdy, elastic protective layer that not only prevents impacts from flying stones and gravel but also protects against moisture, acid rain, and salt corrosion on the metal parts of the undercarriage, preventing rust and ensuring driving safety. 2. Install an Engine Guard: An engine guard is a custom-designed protective device for various vehicle models. Its primary purpose is to prevent mud from accumulating around the engine and to protect the engine from damage caused by impacts from uneven road surfaces during driving. Not all vehicle models come with this feature; owners of vehicles without it can choose to install one.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.