Is it difficult to park a 5-meter-long car?

1 Answers
VanBryce
07/30/25 6:43am
Parking a 5-meter-long car is quite challenging for the following reasons: Most parking spaces in China have a width of approximately 2.6-2.8 meters and a length of about 5.3 meters, with only a very few spaces reaching 6 meters in length. If the vehicle exceeds 5 meters in length, parking in such spaces becomes extremely difficult. During reverse parking, either the front or rear of the car is prone to extending beyond the parking lines, increasing the risk of scratches. Below is an introduction to the standard dimensions of parking spaces: According to the 'Code for Design of Garage Buildings,' the specific dimensions for small car parking spaces in indoor garages are as follows: The minimum size for small car parking spaces using perpendicular parking should be 5.3 meters (length) x 2.4 meters (width), with a minimum width of 5.5 meters for the driveway in front of the parking space. The minimum distance between small cars and the side walls should be 0.6 meters, and the minimum distance to the front and rear walls should be 0.5 meters.
Was this review help?
18
1
Share
More Forum Discussions

Can 0w20 engine oil be used in summer?

Can 0w20 engine oil be used in summer? The meaning of the 0W20 oil grade is: 1. W stands for Winter, the abbreviation of winter. The smaller the number before W, the lower the low-temperature viscosity and the better the low-temperature fluidity, meaning it is suitable for lower minimum temperatures. 2. 20 refers to the viscosity at 100°C. The larger the number, the higher the viscosity and the stronger the high-temperature resistance. Extended content: 1. The composition of the oil grade includes two parts: classification and viscosity specification. The oil classification is represented by a combination of two letters. Those starting with "S" are for gasoline engines, those starting with "C" are for diesel engines, and those with both "S" and "C" are for both gasoline and diesel engines. 2. Generally, they are arranged in alphabetical order. The further back the letter, the higher the quality grade. The following number indicates the oil viscosity. The smaller the number, the better the fluidity in low-temperature environments and the lower the usable temperature, meaning it provides better protection for the engine during cold starts.
17
1
Share

Is a tire pressure of around 2.9 bar dangerous on the highway?

Highway tire pressure around 2.9 bar is dangerous, as the normal tire pressure range is between 2.4-2.5 bar. The hazards of excessive tire pressure are as follows: Tire friction and adhesion will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates localized wear on the central tread pattern of the tire, shortening tire lifespan; increased body vibration indirectly affects the lifespan of other components; it causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the car while driving; puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and impacts can cause internal cracks and explosions, leading to blowouts. The method for resetting tire pressure is as follows: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep," then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the dashboard warning light will turn off, completing the tire pressure reset.
13
3
Share

Does Mercedes-Benz Antifreeze Need to Be Diluted with Water?

Mercedes-Benz antifreeze needs to be diluted with water. The original high-concentration antifreeze has a very high freezing point, so it is necessary to add half the amount of water, meaning the mixing ratio of antifreeze to water should be 1:1. This way, the freezing point of the antifreeze can reach -37 degrees Celsius. Composition of Antifreeze: The main components of antifreeze are: 50% purified water, 40% methanol, and 10% other substances. Types of Antifreeze: Antifreeze is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can Different Antifreezes Be Mixed? The same brand of antifreeze must be used. Different brands of antifreeze may have varying production formulas. If mixed, multiple additives may undergo chemical reactions, rendering the additives ineffective. How to Choose Antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in several specifications with freezing points of -15 degrees Celsius, -25 degrees Celsius, -30 degrees Celsius, -40 degrees Celsius, etc. Generally, it is advisable to choose one that is at least 10 degrees Celsius lower than the lowest temperature in your region.
6
5
Share

Does a car purchased in October 2013 require an annual inspection this year?

A vehicle purchased in October 2013 needs to undergo an annual inspection before the validity period of the 2020 annual inspection expires. Below is the relevant information: Annual Inspection Policy: The new annual inspection policy was implemented starting November 20, 2020. Vehicles inspected within ten years after implementation can be issued an annual inspection pass with a validity period of two years. According to the new regulations, new cars within six years are exempt from inspection twice (an inspection label must be applied for every two years, but the vehicle does not need to undergo on-site testing); in the 6th and 8th years, the vehicle must undergo on-site testing. For private cars older than ten years, the original inspection cycle still applies, i.e., annual inspection once a year for cars between 10 and 15 years old, and twice a year for cars older than 15 years. Applying for an Inspection Pass: Before applying, the owner of the motor vehicle must resolve all traffic safety violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle's license, compulsory motor vehicle traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption certificate, and motor vehicle safety technical inspection pass certificate.
9
1
Share

What is the function of the ECO button in a car?

The ECO button is the activation key for the car's economical driving mode function. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. The eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button; when the dashboard eco indicator light turns on, it merely serves as a reminder function. The eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars employ the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the eco mode. However, it is unnecessary to activate the eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of the eco mode but also impact the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or in N/P gear and manual mode, the eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine's computer prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not function in such cases.
13
0
Share

How long can the license plate quota be retained after vehicle scrapping in Beijing?

After scrapping a vehicle in Beijing, the original license plate can be retained for more than one year, which means the original plate can be used for motor vehicle registration within one year. Here is relevant information: Vehicle scrapping age limit: The vehicle scrapping age limit refers to a safety inspection system based on the number of seats and usage period during the vehicle's service life. It is stipulated that small and micro non-operational passenger cars, large non-operational sedans, and wheeled special machinery vehicles have no usage age limit. Delayed scrapping vehicles: For vehicles requiring approval procedures for delayed scrapping, the current approval process still applies; for vehicles that have already undergone delayed scrapping procedures but do not meet the new scrapping standards, they will be managed as normal vehicles, with a reprinted vehicle license supplement and annual inspection stamps as required, without the delayed scrapping inspection seal; for vehicles that should be scrapped according to the old standards but have not completed deregistration, the new regulations will apply.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.