Is It Dangerous to Leave Windshield Washer Fluid in the Trunk Under Direct Sunlight?

What is the tire specification of the Kia Sportage?

The Kia Sportage has two tire size models: 235/60R16 and 215/65R16. In 235/60R16, the first number 235 represents the tire width of 235MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 16 represents the rim diameter of 16 inches. The middle letter "R" stands for radial tire. In 215/65R16, the first number 215 represents the tire width of 215MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 16 represents the rim diameter of 16 inches. The middle letter "R" stands for radial tire. The Kia Sportage's wheel hub adopts a five-spoke fork design, and the spare tire is full-size. If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is perpendicular to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts rotate instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts by hand until all nuts are hidden. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as "Standard Rim 5.00F".

13

0

Share

What is the standard tire pressure for the GS4?

The normal tire pressure range for the Trumpchi GS4 is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. How to check the tire pressure of the Trumpchi GS4: Press the set button on the dashboard to bring up the tire pressure monitoring. The tire pressure monitoring system is a type of active safety device that can alert the driver in time when there are signs of danger in the tires, prompting the driver to take appropriate measures, thereby avoiding serious accidents. Generally speaking, a tire pressure above 2.8bar is too high, and a tire pressure below 2.0bar is too low. Hazards of overinflated tires: The friction and adhesion of the tires will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates the wear of the central tread pattern, shortening the tire's lifespan; it increases the vibration of the vehicle body, indirectly affecting the lifespan of other components; it causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body, and increasing the load on the vehicle during driving. Hazards of underinflated tires: The friction coefficient with the road surface increases, leading to higher fuel consumption; it makes the steering wheel heavy and prone to deviation, which are factors detrimental to driving safety; it increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; it reduces the function of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; the friction between the tire and the ground increases exponentially, rapidly raising the tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, it will alert if the pressure is below 1.8bar or above 3.0bar. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors the tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, it can also cause the tire pressure warning light to come on. For sensor damage issues, only a complete replacement with a new part will suffice.

6

2

Share

Is running a red light captured from the front or the back?

Both front and back are captured. The determination is made by taking three photos via electronic cameras: the first photo shows the vehicle crossing the stop line at the intersection, including the red light and license plate number; the second photo shows the vehicle completely past the stop line, including the red light and license plate number; the third photo shows the vehicle continuing to move, primarily by comparing the position change from the second photo, including the red light and license plate number. Capturing these three photos confirms the vehicle ran a red light. Running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light prohibits passage, a green light permits passage, and a yellow light serves as a warning. Running a red light is a traffic violation when a vehicle passes through an intersection during a red light. Here are some ways to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow signals and circular signals. If arrow signals are present, check them first, then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are allowed. However, if the right-turn arrow is red, right turns are prohibited; otherwise, it will be penalized as running a red light. Brake in time: When the light turns red, ensure the front of the car does not cross the stop line. If the front wheels accidentally cross, but the rear wheels do not, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed; wait for the green light. Check the green light countdown: If the green light is flashing and there is a countdown, use it to judge whether to proceed. If there is no countdown, and the car is close to the intersection with high speed, it may proceed to avoid running a red light due to delayed braking. If the speed is slow and the car is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized or pedestrian signals, non-motorized vehicles and pedestrians must follow the motor vehicle signal. During a red light, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not penalized under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the violation. Even if recorded, you can apply for reconsideration with the traffic police department. Extreme weather: If visibility is so low that even electronic police cannot clearly see the traffic light, the evidence may be blurry, and no penalty will be issued for mistakenly running a red light. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights. After delivery, provide hospital or patient documentation to the traffic police for verification to clear the violations. If possible, call an ambulance to avoid accidents caused by running red lights. Police direction: During peak hours, traffic police may direct traffic at key intersections. Drivers must follow their hand signals. The traffic police department clarifies that, according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," vehicles that have already crossed the stop line during a flashing yellow light may continue. If the yellow light is already on and a driver accelerates to pass, it will be considered running a red light if captured.

4

5

Share

Are Cars Waterproof?

Waterproofing in cars pertains to their performance. Below is an introduction to the relationship between tire pressure and car performance: Tire Pressure and Load Capacity: Tire pressure is an indicator of a car's load capacity. The tire pressure of a car determines its load capacity—the higher the tire pressure, the greater the load capacity, and vice versa, provided the tire pressure remains within the standard range. The Relationship Between Tire Pressure and Car Power: When tires operate on flat roads, they need to overcome resistance from the ground and air. When tire pressure decreases, the rolling resistance coefficient increases rapidly, leading to tire deformation and higher fuel consumption. Proper tire pressure ensures good car performance.

16

5

Share

When to Use the Car Anti-Slip Button?

The car anti-slip button is used in rainy conditions. Below are relevant introductions about the central control buttons: Electronic Stability Program (ESP): Effectively prevents loss of control situations such as body sideslip and fishtailing. It is generally not recommended for drivers to manually turn it off. Parking Radar/Image: This button activates the panoramic image and radar function, providing audible alerts and visual feedback to help the owner detect surrounding obstacles. Auto Hold: Eliminates the need to keep the foot on the brake pedal, as the system automatically locks the wheels. The wheels unlock when the accelerator pedal is pressed, allowing the vehicle to proceed.

19

5

Share

What Causes a Car Generator to Fail?

Car generator failure is caused by vehicle wear. Below is relevant information about car engines: Principle: When the car engine speed increases, the generator's output voltage also rises. At this point, the regulator reduces the excitation current to maintain the output voltage at around 14V, not exceeding 14.5V. This ensures the battery is not overcharged and maintains a constant vehicle voltage. Therefore, even when the car is idling, the generator can still deliver over 60% of its power. Function: The generator's pulley diameter is much smaller than the crankshaft pulley diameter, causing the generator to rotate at a much higher speed than the engine under belt drive. Thus, the generator is capable of charging the battery even at idle speed.

14

2

Share

Is It Dangerous to Leave Windshield Washer Fluid in the Trunk Under Direct Sunlight?

What is the tire specification of the Kia Sportage?

What is the standard tire pressure for the GS4?

Is running a red light captured from the front or the back?

Are Cars Waterproof?

When to Use the Car Anti-Slip Button?

What Causes a Car Generator to Fail?

How to Deal with Water in the Spark Plug Hole?

How to Turn on the Air Conditioning in Lavida?

What Vehicles Are Referred to as Non-Motorized Vehicles?

Where is the Buick Excelle fuel filter located?