Is it dangerous to drive on highways with AD08R tires in rainy weather?

2 Answers
StEmerson
08/26/25 2:57am
ad08r tires should not be used in rainy weather. This is a semi-slick tire, and its grip is inferior to regular tires in wet conditions. If driven aggressively in the rain, these tires may skid, compromising driving safety. The importance of car tires: Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the suspension system, they help absorb shocks during driving, ensuring good ride comfort and smoothness. They also maintain strong traction between the wheels and the road, enhancing the vehicle's acceleration and braking performance. Precautions for driving on highways in rainy weather: Maintain good visibility: Rain can obstruct a driver's vision, increasing the risk of accidents, so maintaining clear visibility is crucial. Drive cautiously at reduced speeds: Wet roads are slippery, requiring extra caution. Reduce speed and maintain a safe following distance. Stay alert to road conditions, especially in areas with many pedestrians. Adjust speed according to road conditions, and control speed on unfamiliar roads. Follow the vehicle ahead: On unfamiliar or difficult roads, drive carefully along the path of the preceding vehicle. Avoid reckless speeding—only overtake when it is safe. Keep a distance from large vehicles: Large vehicles pose many potential hazards to smaller cars in rainy weather, so smaller vehicles should stay away from them.
Was this review help?
9
3
Share
Richardson
09/08/25 3:09am
As a seasoned driver with years of experience, I've personally used the AD08R high-performance tires, and they truly excel on dry roads. However, the risks increase significantly in rainy conditions on highways. Last week during heavy rain on the highway, the tires suddenly lost grip, and I felt the car slightly floating—a classic case of hydroplaning, which gave me quite a scare. The reason is simple: these tires have shallow treads and fewer drainage channels, prioritizing dry-road grip while significantly reducing friction on wet surfaces. Data shows that wet braking distances can be over 30% longer compared to rain-specific tires. My advice: avoid using AD08R for long highway trips during the rainy season; switching to wet-specific tires like Michelin PS4 is much safer. Keeping speeds below 100 km/h can also reduce risks, along with checking tire pressure—low pressure increases the chance of skidding. Regular tire rotation can extend their lifespan and help prevent accidents.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What to Do When There Is Moisture in the Car Taillight Cover?

The solution for moisture in the car taillight cover is to remove the taillight and let it dry in the sun or use a hair dryer to dry it. The method for removing the taillight is as follows: 1. Open the tailgate and use tools to remove the two plastic fastening clips inside; 2. Open the interior trim panel and remove the fastening screws inside; 3. Carefully remove the taillight without damaging the wiring. Types of car taillights include: 1. Position lights (also called clearance lights), which indicate the width of the car; 2. Brake lights, installed at the rear of the vehicle, using red lights to enhance light penetration; 3. Turn signals, using xenon tubes and controlled by a microcontroller circuit for alternating left-right flashing; 4. Reverse lights, installed at the rear of the car and using white light; 5. Fog lights, installed at the front and rear of the car, using highly penetrating yellow light.
2
2
Share

Does a Car Battery Need Replacement When It's Dead?

Whether a car battery needs replacement when it's dead depends on different situations: 1. If the battery has been dead once and has been in use for no more than 2 years, it can be fully charged and continue to be used without replacement; 2. If the battery has been dead multiple times or has been in use for more than 3 years, it needs to be replaced. A car battery, also known as a storage battery, works by converting chemical energy into electrical energy. Its types include: ordinary batteries, dry-charged batteries, and maintenance-free batteries. Car battery maintenance should pay attention to: 1. Avoid parking the car in an open parking lot for a long time; 2. Charge it frequently; 3. Avoid using car electronics after the engine is turned off.
5
0
Share

What is the standard braking distance for 100 km/h?

100 km/h braking distance standard is generally around 40 meters. Below is relevant information about braking distance: 1. Introduction to braking distance: Braking distance is one of the most important indicators during vehicle inspection by traffic management authorities. The 100 km/h braking distance refers to the distance a vehicle travels from the moment the brakes are fully applied at 100 km/h until maximum braking force is achieved. Currently, there is no specific optimal braking distance defined, but generally, distances within 42 meters are considered excellent, 42-45 meters are acceptable, and anything above 45 meters is considered failing. 2. Factors affecting braking distance: Generally, the more pistons a brake caliper has, the better its braking performance. Additionally, wear on brake pads and discs significantly impacts braking efficiency. Vehicle load also affects braking distance; in real-world scenarios, the more cargo a vehicle carries, the longer its braking distance tends to be.
9
2
Share

Should the accelerator be pressed continuously while driving?

Whether the accelerator should be pressed continuously while driving depends on different situations: 1. If there is no need to decelerate or stop, the right foot should always be on the accelerator pedal; 2. If deceleration or stopping is required, the right foot should be moved from the accelerator pedal to the brake pedal. The accelerator in a car is controlled by a pedal, also known as the throttle pedal, which is a device for controlling the fuel supply to the engine. The operation of the accelerator pedal involves placing the right heel on the floor of the driver's compartment as a pivot point, lightly pressing the ball of the foot on the accelerator pedal, and using the ankle joint's extension and flexion movements to achieve gentle pressing and slow releasing. The correct method of pressing the accelerator is: 1. When starting the engine, do not press the accelerator pedal all the way down; it is better to press it slightly above the idle throttle position. 2. When shifting gears, the coordination between pressing the clutch and the accelerator pedal should be well-timed. 3. When driving uphill, do not press the accelerator pedal all the way down.
18
3
Share

Which has more power, 1.4T or 2.0L?

Compared to the 1.4T, the 2.0L has more power. Below are the relevant details about the engines: 1. Fuel consumption comparison between 1.4T and 2.0L engines: Turbocharged engines primarily enhance engine power and maximum torque by increasing the intake air volume. Additionally, turbocharged engines can burn fuel more completely, thereby reducing emissions. Compared to larger displacement engines, the 1.4T indeed offers better fuel economy. Generally, 1.4T turbocharged engine models are more fuel-efficient than 2.0L naturally aspirated engines. 2. Power comparison between 1.4T and 2.0L engines: The 1.4T engine has a maximum power of 150 horsepower, while the 2.0L engine has a maximum power of 154 horsepower. From these figures, it can be seen that the naturally aspirated engine has a slight advantage. However, in terms of torque, the 1.4T engine can achieve a peak torque of 250 Nm, whereas the 2.0L's peak torque is only 204 Nm.
19
2
Share

Can 10w40 Alleviate Engine Oil Burning?

10w40 can alleviate engine oil burning. Below are the relevant details about 10w40 engine oil: 1. Advantages of 10w40 engine oil: 10W40 engine oil has a higher viscosity, providing better protection at high temperatures. For 10W40 engine oil, it is more suitable for use in southern China where winters are not too cold. The low-temperature fluidity of 10W engine oil is sufficient to meet the engine's requirements, and the high viscosity of 40-grade oil is suitable for German cars, older vehicles, or engines. 10W40 engine oil is only suitable for vehicles with minor oil burning issues. For vehicles with severe oil burning, systematic inspection and more effective measures are required. 2. Vehicle models not suitable for 10w40 engine oil: For Japanese cars (Toyota, Honda, etc.), Korean cars (Kia, Hyundai), American cars (GM, Ford, etc.), and French cars, the manufacturer's manual specifies the use of 5W30. If 10w40 engine oil with higher viscosity is used instead of the manufacturer-specified 5w30, the vehicle's lifespan will be significantly shortened, fuel consumption will increase by more than 4%, and noise levels will also rise.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.