Is It Dangerous to Continue Driving with an Overheated Radiator?

Where Does a Car Usually Leak Oil?

Common locations for car oil leaks include the engine oil pan, brake fluid seepage, and valve cover leaks. If car oil leaks go unnoticed for an extended period, they can inevitably cause damage to the vehicle. The reasons for car oil leaks are as follows: Poor quality and craftsmanship of engine components, or issues with structural design leading to excessive gaps between parts. Wear and tear on engine components or positional deviations can also cause leaks. In such cases, simply visit a repair shop or 4S store to replace the worn parts. Loose fastening nuts affecting the engine's operation. Locate and tighten the nuts to resolve the issue. Sealing materials such as engine oil seals may age, deform, or deteriorate due to prolonged use. Replace the corresponding aged or deteriorated parts. Damage to the fitting areas of components, affecting the leakage of lubricating oil. Replace the damaged parts to fix the issue. Excessive addition of lubricating oil leading to an overly high oil level. Drain the excess lubricating oil to resolve the problem.

13

2

Share

What is the difference between Class 1 and Class 2 passenger vehicles?

The differences between Class 1 and Class 2 passenger vehicles are as follows: 1. Class 1 passenger vehicles include sedans with 7 or fewer seats, small passenger vehicles, and small trucks with a weight of 2 tons or less. The toll price conversion coefficient is 1. 2. Class 2 passenger vehicles include those with 8 to 19 seats, trucks weighing more than 2 tons up to 5 tons (inclusive), with a toll price conversion coefficient of 2. The method to measure the vehicle front height is to measure vertically from the ground at the position of the front axle upwards. 3. Class 1 passenger vehicles have a front height of less than 1.3, including sedans, jeeps, motorcycles, etc. 4. Class 2 passenger vehicles have a front height equal to or greater than 1.3, including small trucks, light trucks, small passenger vehicles. Mini vans are defined as Class 2 vehicles due to this criterion. 5. Based on vehicle appearance, Class 1 vehicles are complete trucks with a cargo compartment, while Class 2 vehicles are chassis with a cab but no cargo compartment, used for modifying specialized vehicles such as dump trucks, fire trucks, and truck cranes.

6

2

Share

Where is the cabin air filter located in the JAC T6 GT?

The cabin air filter in the JAC T6 GT is located behind the glove compartment on the passenger side. To replace the cabin air filter, you need to first remove the glove compartment. The cabin air filter is an important component of the car's air conditioning system and needs to be replaced regularly. If not replaced for a long time, it can affect the performance of the air conditioning system and the health of the passengers. The working principle of a car air conditioning system is as follows: 1. When heating, the high-temperature coolant from the engine flows through the heater core, and the air blown by the blower also passes through the heater core, allowing warm air to be blown out from the air vents. 2. When cooling, the compressor clutch engages, causing the engine to drive the compressor. The compressor then continuously compresses the refrigerant and delivers it to the evaporator. 3. The refrigerant expands in volume inside the evaporator, absorbing heat in the process. The refrigerant cools the evaporator, which in turn cools the air blown by the blower, allowing cold air to be blown out from the air vents.

13

1

Share

How to Adjust the Time on Buick Excelle's Dashboard Clock?

Method to adjust the time on Buick Excelle's dashboard clock: Turn on the ignition, switch on the radio, and when the time is displayed, press and hold the right-side number 4 key (clock). Simultaneously adjust the left-side previous track button (H for hours) and next track button (M for minutes) to set the desired time. Below are additional details about the Buick Excelle: 1. Exterior: The new Excelle adheres to Buick's "Dynamic and Flowing" design language, incorporating classic elements from the Riviera concept car. It features a new wing-shaped chrome grille, LED automatic sensing headlights, wing-shaped LED taillights, dual-peak body character lines, and extra-wide-view exterior mirrors. 2. Interior: The new Excelle's cabin continues Buick's 360-degree wraparound integrated design, complemented by high-touch interior materials and Quiet-Tuning, Buick's patented noise-reduction technology. It comes equipped with a three-spoke multifunction steering wheel, ice-blue sport instrument panel, fully automatic climate control system, one-touch start function, rear air vents, and a flexible 400L luggage compartment.

10

3

Share

How often should the spark plugs be replaced in a Golf VII?

For the Golf 7, spark plugs should be replaced every 30,000 to 50,000 kilometers. The replacement interval varies depending on the material of the spark plugs. Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers, but this may differ based on the brand and engine. It is recommended to follow the owner's manual. You can refer to the following standards for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires in the firing order and secure the cover.

1

4

Share

Where to Check the Fuel Level Display on Cadillac CT5?

The fuel gauge displays the remaining fuel amount in the tank. There is an arrow on the fuel gauge indicating the side of the vehicle where the fuel filler door is located. '1' represents a full tank, while '0' indicates an empty tank. Below is an introduction to the Cadillac CT5: 1. Exterior: The Cadillac CT5 measures 4924/1883/1453mm in length/width/height, with a wheelbase of 2947mm. Its precise 50:50 body weight distribution fully balances the weight on each tire, achieving a perfect balance between acceleration and steering. The sport version of the CT5 pays homage to the classic V-Series performance cars with its iconic V-shaped mesh grille, while the luxury version features a starburst-style front grille with an embedded exquisite shield shape. 2. Powertrain: The Cadillac CT5 adopts a new-generation lightweight luxury rear-wheel-drive platform to enhance driving pleasure. It is equipped with a 2.0T variable-cylinder turbocharged engine featuring Tripower variable valve management technology, enabling three operating modes: four-cylinder high-performance mode, four-cylinder economy mode, and two-cylinder ultra-economy mode. Paired with a 10-speed automatic transmission and ETRS electronic gear shift, it boasts a computing capability of 180 million operations per second, improving handling responsiveness.

7

3

Share

Is It Dangerous to Continue Driving with an Overheated Radiator?

Where Does a Car Usually Leak Oil?

What is the difference between Class 1 and Class 2 passenger vehicles?

Where is the cabin air filter located in the JAC T6 GT?

How to Adjust the Time on Buick Excelle's Dashboard Clock?

How often should the spark plugs be replaced in a Golf VII?

Where to Check the Fuel Level Display on Cadillac CT5?

Which brand is the four-wheel drive system of Lynk & Co?

What happens if you shift into P gear while driving?

Where is the Cruze air conditioning pressure switch located?

Where is the Lynk & Co 05 rearview mirror heating switch located?