Is It Dangerous Not to Change Transmission Fluid?

2 Answers
MaxAnn
07/24/25 3:39am
Not changing transmission fluid is dangerous, and its hazards include: 1. Causing damage to the transmission shift control mechanism; 2. Leading to wear on the gears and clutch plates inside the transmission; 3. Affecting the normal operation of the transmission. The methods for changing transmission fluid are: 1. Gravity replacement: After loosening the nut at the bottom of the oil pan, the transmission fluid will automatically flow out from the oil hole; 2. Machine replacement: Connect the transmission and the machine through a pipeline interface to push out the old fluid with new fluid. The function of the transmission: To change the transmission ratio, expand the range of torque and speed variation of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable conditions.
Was this review help?
20
0
Share
DelJake
08/10/25 11:12pm
Transmission fluid is like the blood in the human body – failing to replace it when overdue can lead to serious consequences. I've seen too many car owners gamble by delaying fluid changes, only to end up spending tens of thousands on major transmission repairs. Over time, the fluid thins out, reducing its lubricating effectiveness and causing abnormal wear during gear engagement. Even more dangerously, sludge buildup can clog fluid passages, leading to gearshift jerks and power transmission interruptions in automatic transmissions – sudden loss of speed on highways is no joke. Particularly for CVT transmissions using steel belts, fluid degradation directly causes belt slippage, potentially destroying the entire transmission. Strict adherence to maintenance manual intervals is recommended, typically every 40,000-60,000 kilometers.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What are the advantages and disadvantages of car static straps?

Static straps are devices used to eliminate static electricity from vehicles. Their primary purpose is to conduct static electricity, effectively discharging the static charge to the ground, thereby avoiding the troubles caused by static electricity. Car static straps not only remove static electricity but can also glow at night. This helps alert vehicles behind during nighttime driving, prompting them to maintain a safe distance to prevent hazardous accidents. The hazards of car static electricity: Although the current of static electricity is small, the voltage can reach as high as 10,000 to 100,000 volts, comparable to lightning. This poses a significant risk of accidents when refueling at gas stations. Static electricity accumulated in the human body can harm health, severely affecting metabolism, increasing blood sugar levels, causing skin diseases, and leading to autonomic nervous system disorders, reduced immunity, and susceptibility to illnesses like colds. While driving, an unexpected static shock can cause excessive fright, potentially leading to accidental traffic incidents. To prevent car static electricity, here are several methods: Eliminate static electricity from your body before driving. You can wash your hands or touch a wall to discharge static electricity. Use natural materials for car accessories and minimize synthetic fabrics. For example, placing genuine leather seat covers on seats reduces the likelihood of friction-induced static. Avoid wearing synthetic clothing and opt for cotton garments instead. Use a humidifier in the car or place a damp towel on the dashboard. This increases air humidity inside the car, making it less prone to static buildup. Use maintenance products. Many anti-static sprays are available on the market, which can be applied to door handles, dashboards, fabric covers, and other areas prone to static electricity.
1
2
Share

What are the body dimensions of the NIO ES8?

The NIO ES8 has a body length, width, and height of 5022mm, 1962mm, and 1756mm respectively, with a wheelbase of 3010mm, classifying it as a mid-to-large-sized SUV. The NIO ES8 is a dual-motor model, with the front axle motor delivering a maximum power of 240 kW and a maximum torque of 420 Nm, while the rear axle motor also provides a maximum power of 240 kW and a maximum torque of 420 Nm. The exterior of the NIO ES8 features NIO's family design language, including the X-Bar front grille and heartbeat-curve LED taillights. The vehicle is built with an all-aluminum body and chassis, comes standard with active air suspension, and is equipped with dual motors on both the front and rear axles, adopting an all-wheel-drive system.
1
5
Share

Where is the body control module located in the Tiguan?

The body control module in the Tiguan is located inside the lower left side of the steering wheel. The functions of the body control module include: power window control, central door lock control, remote anti-theft system, lighting system control, heated power mirror control, instrument panel backlight adjustment, power distribution, etc. The Tiguan is a vehicle produced by Shanghai Volkswagen, with dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, and a wheelbase of 2684mm. The vehicle comes standard with ESP electronic stability program, EBD electronic brake-force distribution, ASR traction control, EDS electronic differential lock, EPB electronic parking brake, auto hold function, and TPR tire pressure monitoring system.
2
0
Share

What does China V vehicle displacement mean?

China V vehicle displacement refers to the National Fifth Stage Emission Standards for motor vehicle pollutants, with emission control levels equivalent to the Euro 5 emission standards currently implemented in Europe. China V imposes more stringent restrictions on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. From China I to China VI, each upgrade in standards reduces vehicle pollution by 30% to 50%. The China emission standard (e.g., China IV, China V) indicates the total emission level of a vehicle's exhaust pollutants - the higher the number, the higher the standard, and correspondingly the lower the engine emissions. Vehicle emission pollutants include: carbon dioxide, sulfides, nitrogen oxides, fluorochlorohydrocarbons, non-methane total hydrocarbons, etc.
8
3
Share

What are the symptoms of insufficient cylinder compression?

Symptoms of insufficient cylinder compression include: 1. Deep grooves formed on the cylinder walls, leading to loss of sealing between the piston, piston rings, and cylinder walls, resulting in reduced cylinder compression pressure and loss of power; 2. Downward leakage of the combustible mixture increases crankcase pressure, which in severe cases may cause crankcase explosion, and upward leakage of lubricating oil into the cylinder leading to oil burning; 3. Severe smoke from the exhaust pipe, abnormal engine noise, and the engine failing to operate normally or even stalling; 4. Weakened vehicle acceleration performance, slightly increased fuel consumption, decreased power performance, and severe vehicle shaking; 5. Severe carbon buildup in the combustion chamber and poor emissions.
10
0
Share

What are the engine specifications of the Tracker?

The engine specifications of the Tracker are: The entire lineup is equipped with a 1.3T turbocharged engine, delivering a maximum power of 121kW, a maximum horsepower of 165PS, and a maximum torque of 240Nm. The top-tier model is paired with a 9AT transmission and features a four-wheel-drive system, while other models are equipped with a CVT continuously variable transmission. The Tracker is a vehicle under SAIC-GM Chevrolet, with dimensions of 4411mm in length, 1808mm in width, and 1664mm in height, and a wheelbase of 2640mm. The raised muscle lines on the hood of the vehicle taper inward, cleverly connecting with the split-type headlights. The tungsten silver chrome trim integrates with the LED daytime running lights at both ends, and the extending lines enhance the visual width of the front end.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.