Is it dangerous for cold tire pressure to increase from 2.5 to 2.9 on the highway?

1 Answers
SanKingston
07/30/25 7:07am
It is normal for cold tire pressure to increase from 2.5 to 2.9 when driving on the highway, as the heat generated inside the tires during driving causes the tire pressure to rise. Typically, the pressure will be about 0.3 bar higher than the cold tire pressure. A tire pressure of 2.9 will not directly cause a blowout, as tires are not extremely fragile and can withstand a maximum pressure of 3.5-2.4 bar. Generally, for front-wheel-drive vehicles, it is recommended to have higher front tire pressure and lower rear tire pressure, meaning the front tire pressure should be 0.1~0.2 bar higher than the rear tire pressure. This is because the front-heavy design of the engine makes the vehicle heavier in the front. If the vehicle is fully loaded, the tire pressure can be appropriately increased, especially for the rear tires. The tire pressure label can usually be found on the edge of the driver's door frame, the fuel tank cap, or in the user manual. The manufacturer's recommended tire pressure values, unless otherwise specified, are suitable for both winter and summer and do not require special adjustments. Excessive tire pressure can cause the following issues: When driving on bumpy roads, high tire pressure will cause noticeable vibrations in the vehicle body. Excessive tire pressure concentrates the vehicle's weight on the center of the tire tread, leading to rapid wear in the central part of the tire and affecting its lifespan. Additionally, excessive tire pressure reduces the tire's contact area with the road, which can increase braking distance on low-traction surfaces during emergency braking, raising the risk of rear-end collisions.
Was this review help?
20
2
Share
More Forum Discussions

What is the LC80?

LC80 is the Toyota Land Cruiser. The Land Cruiser LC80 is a legendary model in Toyota's off-road vehicle lineup, with its massive size and unparalleled off-road capabilities creating a classic image in the hearts of car enthusiasts. The LC80 was produced from 1989 to 1998, and when it first entered China, it revolutionized people's understanding of off-road vehicles. More relevant information is as follows: 1. Configuration: To enhance axle support and reduce vibrations and impacts from rough terrain, the LC80's front and rear suspensions were equipped with three and five rubber-bushed links, respectively. The LC80, featuring front, center, and rear differential locks, represents the pinnacle of off-road performance in the Land Cruiser series. 2. Performance: The LC80 was the most comfortable off-road vehicle of its era, with its large body and weight contributing significantly to this. The LC80's smooth and stable cruising performance on the road was unmatched by other vehicles. The four-coil spring suspension greatly improved comfort compared to the leaf spring era and also enhanced handling accuracy. The interior space is absolutely spacious, and the layout of the interior is highly user-friendly. The driver's seat in the LC80 is extremely comfortable, allowing the driver to sit upright with perfect back support. There is also a dedicated platform for the left foot when not using the clutch, making it possible to drive 1,000 kilometers continuously without the back pain often experienced in smaller vehicles like the Jeep Cherokee.
4
5
Share

What does 'low' mean in a car?

low in a car refers to the low temperature setting of the vehicle's air conditioning. Different car models have different air conditioning indicators, and some may display High, Mid, etc., meaning high and medium. If the air conditioning is set to the lowest temperature, the 'low' indicator will appear. When using the air conditioning for a long time, it is essential to clean it regularly to prevent excessive dust buildup, which can lead to mold formation. The suitability of the car air conditioning directly affects the comfort of the driver and passengers. If the air conditioning is kept at a low temperature for a long time, the endocrine system of the people inside the car may not adapt immediately, potentially leading to colds, fevers, and other symptoms. Moreover, low temperatures can also damage the compressor of the air conditioning unit. Under normal circumstances, the optimal temperature is around 24 to 27 degrees Celsius. Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the compartment, providing a comfortable environment for passengers, reducing the driver's fatigue, and improving driving safety. Car air conditioning generally includes a cooling device, a heating device, and a ventilation device. This combined system makes full use of the limited space inside the car.
7
1
Share

What is the normal tire pressure for Haval H6?

The tire pressure displayed on the Haval H6 tire pressure chart is considered normal as long as it is neither below nor above the standard range, and the pressure is balanced across all four tires. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. In summer, the tire pressure should generally be set at the lower limit of the standard tire pressure. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1bar to prevent tire blowouts due to high temperatures. In winter, the tire pressure should be based on the standard tire pressure and can be appropriately increased by about 0.2bar. Excessive tire pressure can reduce the friction and adhesion of the tires, affecting braking performance; it can also cause steering wheel vibration and deviation, reducing driving comfort. Insufficient tire pressure can increase the friction coefficient between the tires and the road surface, leading to higher fuel consumption; it can also make the steering wheel heavy and prone to deviation, which are factors detrimental to driving safety.
1
1
Share

How many kilometers can a car travel in one minute at a speed of 100?

Vehicle speed refers to the distance a car travels per unit of time, commonly measured in kilometers per hour or meters per second. At a speed of 100, a car can travel approximately 2.7 kilometers in one minute. Main factors affecting road speed: Influence of road conditions: Among the technical performance of road conditions, the state of the road surface coating significantly impacts various components of a car. Good road conditions lead to favorable operating conditions for the car; conversely, poor road conditions result in worse operating conditions. Influence of operating conditions: Operating conditions are a factor affecting the usage of a car and its components. For example, cars with the same load capacity traveling in bustling urban areas versus suburban areas (with different road surface coatings) will experience a 50%-52% reduction in speed in urban areas compared to suburban areas; engine speed increases by 30%-36%; and the frequency of gear shifting increases. Transportation conditions: In addition to driving speed, transportation conditions include factors such as the length of transport trips, trip utilization coefficient, load utilization coefficient, trailer utilization coefficient, and the type of goods transported. Climate and natural conditions: Natural climate conditions (environmental temperature, humidity, wind force, wind direction, and solar radiation intensity) affect the working temperature state of car components, altering their technical performance and reliability. Seasonal conditions: Seasonal changes bring variations in environmental temperature and road conditions. Consequently, the wear intensity of car parts differs across seasons.
3
2
Share

Is the 2008 Accord Still Worth Buying?

Whether it's worth buying or not, you should take it for a high-speed test drive. Some cars may experience resonance under the driver's feet at high speeds. Here are some considerations when purchasing a used car: 1. Check the electronic devices inside the car: Test the functionality of the electronic devices and buttons, as well as the sunroof's operation—remember to open and close it several times. 2. Inspect the A-pillar for cracks to determine accident history: Look for any welding marks on the A-pillar. While this method seems straightforward and effective, be cautious as some cars' seals may not fit back properly once removed, making it difficult to restore them to their original position, and there's a risk of breaking the clips on the interior panels.
4
5
Share

What is the appropriate lumens per watt for LED car lights?

For automotive LED lights, a 35W model typically produces 3200 lumens, which is 91 lumens per watt. Generally, 80-100 lumens per watt is considered most suitable, but the specific choice should be based on the original car light's power and personal brightness requirements. Theoretically, higher wattage in LED car lights means greater power and increased brightness. However, in practice, higher wattage is not always better. If the wattage is too high, the power increases, leading to higher operating temperatures, which demands better heat dissipation. The operating temperature of LED chips must be kept below 85 degrees Celsius to ensure a lifespan of over 30,000 hours. If the LED wattage is high, the power increases, and so does the operating temperature. Once it exceeds 85 degrees Celsius, the lifespan of the LED light will decrease as the temperature rises. Additionally, since car circuits have a rated power, if the LED light's wattage is too high and exceeds the load capacity of the car's wiring, the wires may overheat and even burn out. In terms of luminous efficiency, LED headlights of the same wattage are brighter than the original halogen lights. LED lights can be categorized into different power ranges based on power consumption. Common single-unit automotive LED lights come in 10W, 20W, 30W, 50W, and 100W. Generally, a 1W LED light for household use is equivalent to an 8W incandescent bulb, while automotive LED lights are 2-3 times more powerful than standard halogen lights. Therefore, when replacing lights, it's unnecessary to install higher-wattage bulbs; only LED lights with the same or lower wattage as the original car lights should be used.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.