Is it correct to yield to straight-going traffic when turning and yield to right-turning traffic when turning left?

2 Answers
JoannaLynn
07/24/25 4:48pm
Yielding to straight-going traffic when turning and yielding to left-turning traffic when turning right. The relevant details are as follows: Yielding to straight-going traffic when turning left: Yielding to left-turning traffic when turning right refers to the rule that left-turning vehicles must yield to straight-going vehicles, and right-turning vehicles in the same direction must yield to left-turning vehicles. When a vehicle passes through an intersection regulated by traffic signals, it should enter the guiding lane according to the intended direction of travel. Other situations: Vehicles preparing to enter a roundabout must yield to vehicles already inside the roundabout; when turning left, the vehicle should turn close to the left side of the intersection center point. Turn on the turn signal when turning, and use low beams when driving at night. When encountering a green light, pass through in sequence; when encountering a red light, stop in sequence outside the stop line. If there is no stop line, stop outside the intersection.
Was this review help?
14
2
Share
DelRiver
08/11/25 9:19am
I'm a young driver with limited experience, but I'm quite clear about the rule 'yield to through traffic when turning, and left-turning vehicles yield to right-turning ones'—my driving instructor emphasized it repeatedly during training. It's absolutely correct! For instance, turning vehicles must yield to through traffic because straight-moving cars travel faster; forcing your way in could lead to rear-end collisions or crashes. The same goes for left-turning vehicles yielding to right-turning ones—it helps maintain order at intersections. Once, I failed to yield promptly while turning on a city side road and got scolded badly, nearly causing a scrape. Safety is crucial, especially in rain or fog when visibility is poor; following this rule reduces accidents. After getting my license and driving more, I've come to appreciate its value: it's not a hassle but a safeguard for smooth travel. It even applies in residential areas—mutual courtesy fosters harmony. In short, such traffic rules are universal; making them a habit boosts driving confidence and peace of mind.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

How is Vehicle Horsepower Calculated?

Horsepower equals torque multiplied by rotational speed. Below is a detailed explanation of horsepower: 1. Detailed calculation formula: Power (W) = 2π × Torque (N-m) × Rotational Speed (rpm)/60. After simplification, it becomes: Power (kW) = Torque (N-m) × Rotational Speed (rpm)/9549. This is how a car's horsepower is calculated. Engine horsepower refers to the engine's output capability (work done), i.e., output power. 2. Overview of output power: For other electrical appliances, the nominal power, also called nominal output power, refers to the maximum output power that the appliance can sustain for a long time without distortion. The maximum power refers to the instantaneous peak power that the appliance can handle without damage, representing its maximum load capacity. Output power = Input power – Power loss.
2
4
Share

What are the differences between Roewe i5 and i6?

Here are the differences between Roewe i5 and i6: 1. Overall body dimensions: The top-trim Roewe i5 has a shorter body length compared to the top-trim Roewe i6, and the wheelbase of the Roewe i5 top-trim is also slightly shorter than that of the Roewe i6 top-trim. 2. Overall configuration: The top-trim versions of Roewe i6 and Roewe i5 are quite comparable. The Roewe i5 is a compact sedan under the Roewe brand, with its latest top-trim model being the 2020 GL20T Internet Super Ultimate Edition. The Roewe i6 is also a compact sedan from Roewe. 3. Power output: The top-trim Roewe i5 delivers more powerful performance than the top-trim Roewe i6.
4
2
Share

How to Effectively Clean Car Carbon Deposits

Methods for cleaning car carbon deposits: 1. Engine disassembly cleaning: The engine needs to be disassembled, and then cleaning agents, ultrasonic methods, etc., are used to completely and thoroughly remove carbon deposits from the components. 2. Using an engine cleaning kit: Hang a bottle tool above the engine, pour cleaning agent into the bottle tool, and introduce it into the engine through a conduit to achieve the purpose of cleaning carbon deposits. Here are some additional tips for reducing carbon deposit formation: Use high-quality fuel, as the main components of carbon deposits are wax and gum deposits in the fuel, so the lower the gum content in the fuel, the better. Avoid driving at low speeds for extended periods; you can periodically drive at high speeds. The principle of using high-speed driving to remove carbon deposits is to accelerate gas flow, which can remove a small portion of carbon deposits that are not yet firmly attached, increase combustion temperature, and allow some carbon deposits in the cylinder to be burned.
5
4
Share

Can You Continue Driving When the Engine Fault Light Is On?

If the engine fault light is on, it is recommended not to continue driving. Here are some solutions for the engine fault light: 1. Clean the engine: Once the engine fault light comes on, the owner should promptly clean the carbon deposits in the engine. 2. Improve fuel quality: Domestic fuel currently cannot meet the requirements of high-performance engines, so owners should take steps to improve fuel quality themselves. 3. Use higher-octane gasoline: After cleaning the engine, since most engines compliant with China IV emission standards have a compression ratio above 10.0, such vehicles are not suitable for long-term use of gasoline below 95 octane. To maintain the engine in good working condition, owners can choose to use 95 or 97 octane gasoline, which usually resolves the issue of the engine fault light being on.
16
4
Share

Can Keyless Start Be Installed as an Aftermarket Feature?

Keyless start can be installed as an aftermarket feature. Below is relevant information about keyless start systems: 1. Definition: A keyless start system allows you to start the vehicle without physically turning a key. Simply keep the key in your bag or pocket, then press a button inside the car or turn the ignition knob to start the engine. This offers greater convenience and significantly enhances the sense of luxury and technological sophistication. 2. Precautions: Avoid placing the key fob near electronic devices. Since smart keys use low-intensity radio waves, they may malfunction when exposed to magnetic interference. Frequently storing the smart key with mobile phones may cause operational failures due to frequency interference. For smart keys, the most critical risk is dropping them from height, as the internal circuitry has weak impact resistance and can be easily damaged by severe collisions.
15
2
Share

What are the effects of driving without engaging the handbrake?

Driving without engaging the handbrake has no impact, as the purpose of the handbrake is to provide braking when parking on flat ground or slopes, preventing the vehicle from rolling automatically when unattended. The correct method to engage the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply gentle force when pulling the handbrake; 3. Pull the handbrake up to about 70% of its capacity, as pulling it all the way to the top will shorten the lifespan of the handbrake cable. The dangers of forgetting to engage the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, potentially stalling the engine; 2. Accelerated wear of the brake discs and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake cylinder fluid, leading to brake failure.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.