Is it correct to say that a car travels approximately 80 kilometers per minute?

2 Answers
BeauFitz
07/25/25 6:19am
The statement that a car travels approximately 80 kilometers per minute is incorrect; it should be that a car travels approximately 80 kilometers per hour. Below is the relevant information: Speed of a car per hour: Under normal circumstances, the speed of a car is about 40-60 kilometers/hour. If we calculate based on a car speed of 60 kilometers/hour (1 kilometer/hour = 0.28 meters/second), then the car's speed is 16.8 meters per second. With 60 seconds in a minute, the distance traveled would be approximately 1008 meters. Speed of a car on highways: Highways should indicate the speed limits for each lane. The maximum speed should not exceed 120 kilometers per hour, and the minimum speed should not be less than 60 kilometers per hour. If there are 2 lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour. If there are 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour.
Was this review help?
16
3
Share
MacHarmony
08/10/25 6:07pm
As an experienced driver who has been on the road for many years, I often drive on highways, usually maintaining an average speed of around 100 km/h. 80 kilometers per minute? That speed is way too exaggerated. Let me do the math: 1 minute equals 1/60 of an hour, so 80 kilometers per minute translates to 4,800 kilometers per hour. That's even faster than a jet plane! In reality, the most powerful Ferrari or Bugatti supercars can only reach slightly over 400 km/h at most, and F1 racing cars top out around 380 km/h. Ordinary family cars are even slower, typically ranging between 60 to 120 km/h. Safety comes first when driving—excessive speed can lead to loss of control or tire blowouts. I've seen plenty of accidents caused by speeding. During everyday driving, I maintain a steady speed and adhere to speed limits, especially in urban areas. Driving slower not only keeps me at ease but also saves some fuel costs.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What are the effects of antifreeze?

The main functions of antifreeze are: 1. Cooling is its most basic function. It protects engine performance and extends service life. 2. It also has anti-freeze, anti-boil, and anti-scale functions. Especially when the outdoor temperature is below zero, antifreeze can prevent vehicle components from failing due to cold weather. More information about antifreeze is as follows: 1. Antifreeze is also known as anti-corrosion automotive antifreeze. It is an aqueous solution of ethylene glycol that prevents metal rust and protects the engine. 2. The primary function of antifreeze is to prevent system failures, cracks, or even breakdowns caused by cooling issues in cold weather.
8
0
Share

How to activate cruise control in the Sagitar?

The method to use cruise control in the Sagitar is as follows: 1. set- The first press sets the cruise speed. After cruise control is activated, pressing set- decreases the set cruise speed. Pressing the accelerator only increases speed without changing the set cruise speed or canceling automatic cruise. 2. Releasing the accelerator will automatically reduce the speed to the set cruise speed and maintain it. Pressing the brake pauses automatic cruise, but the previously set cruise speed remains effective. 3. Pressing set- again automatically maintains the speed at the previously set cruise speed. set+ The first press activates automatic cruise, and pressing it again deactivates automatic cruise and clears the previously set cruise speed.
1
3
Share

Where is the Bluetooth in Infiniti QX50?

Infiniti QX50 Bluetooth can be set in the settings menu of the InTouch system. The following is related information about Infiniti QX50 Bluetooth connection and disconnection: 1. Compatibility: It is also highly related to the compatibility of the two systems. System incompatibility may cause Bluetooth to fail to match. 2. Signal: The car signal is shielded or interfered with, resulting in search or matching failure. 3. Device interference: Interference from electronic devices in the car such as radios and car DVD players. 4. Multimedia system: The multimedia system malfunctions, possibly due to too many connected devices or system code confusion.
20
0
Share

What does 0-100 km/h acceleration mean for a car?

It refers to the time required for a car to accelerate from a standstill (0 km/h) to 100 km/h. Here is expanded content: 1. 0-100 km/h acceleration: Also known as 0-100 km/h sprint. It indicates the time needed for a vehicle to accelerate from complete standstill (0 km/h) to 100 km/h, which is the most direct reflection of a car's power performance. The shorter this acceleration time, the stronger the vehicle's acceleration capability. 2. Impact of fuel type: Since fuel octane ratings fluctuate, differences in methane content can affect 0-100 km/h acceleration results. Variations in remaining fuel during testing also influence vehicle weight and consequently may lead to different test outcomes.
8
1
Share

What is the fuel consumption per 100 kilometers for a 10-year-old Forester?

10-year-old Forester's fuel consumption per 100 kilometers is 13 liters. Below are the fuel consumption calculation formula and fuel-saving tips: Correct fuel consumption calculation formula: Fuel consumed ÷ distance traveled × 100 = fuel consumption per 100 kilometers. The data on fuel consumed is relatively difficult to obtain accurately. Generally, a full tank is used as the initial data. After traveling a certain distance, the tank is filled again, and the fuel amount provided by the gas station is taken as the final data. Fuel-saving tips: Idling for more than 1 minute consumes the same amount of fuel as starting the engine once. The fuel consumed by idling the engine for 5 minutes can allow the car to travel more than 1 kilometer.
4
5
Share

What are the reasons for the high fuel consumption of BYD F0?

Here are the reasons for the high fuel consumption of BYD F0: 1. Idling: When the car is idling, fuel continues to be consumed without an increase in mileage, which inevitably leads to higher fuel consumption. 2. Warm-up time: The fuel injection rate is high during idle warm-up. Prolonged warm-up before driving in winter can cause an increase in fuel consumption. 3. Sensor damage: Check if the oxygen sensor is damaged. The oxygen sensor primarily monitors the air-fuel ratio in the engine. Once damaged, it can cause an imbalance in the engine's air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, black smoke may be emitted from the exhaust pipe while driving. In this case, the oxygen sensor needs to be replaced.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.