Is it better to use 92 or 95 octane gasoline for the new Qashqai?

1 Answers
Jordan
07/30/25 4:53am
According to the official vehicle user manual recommendation, the new Qashqai should use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle user manual, you can also find it on the fuel tank cap, which will also be marked. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally speaking, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the new Qashqai occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will change the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced in practice. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If it's mild knocking, it only increases noise without significant damage to the engine. However, if there is noticeable knocking, it indicates severe engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on the pistons and cylinders, and in severe cases, can lead to cylinder scoring.
Was this review help?
13
0
Share
More Forum Discussions

How to adjust the clock on Wuling Hongguang S3?

Method to adjust the clock on Wuling Hongguang S3: 1. Locate the two small dots below the clock; 2. The left dot adjusts the minute hand counterclockwise, and the right dot adjusts the minute hand clockwise. Make adjustments accordingly. The Wuling Hongguang S3 is a compact MPV with body dimensions of 4655mm in length, 1735mm in width, and 1790mm in height, a wheelbase of 2800mm, a minimum ground clearance of 208mm, and a curb weight of 1470kg. It is powered by a 1.5L turbocharged engine producing a maximum horsepower of 147PS and a maximum power output of 108kW at 5800rpm, with a maximum torque of 250Nm between 3600 to 4000rpm. It is paired with a 6-speed manual transmission.
14
4
Share

How to Activate the Windshield Washer?

To activate the windshield washer, pull the wiper control lever toward the driver. The windshield wiper is a blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. It clears rain, snow, and dust from the windshield that obstruct the view. The power source of the wiper comes from the electric motor, which is the core of the entire wiper system. The motor has strict quality requirements and is integrated with the worm gear mechanism. The worm gear mechanism functions to reduce speed and increase torque. The output shaft drives the four-bar linkage, converting continuous rotational motion into a side-to-side oscillating motion.
16
5
Share

What are the steps for using toothpaste to treat car scratches?

Steps for using toothpaste to treat car scratches: 1. Clean the scratched area of the car with water and let it dry; 2. Take a clean, soft microfiber cloth and slightly dampen it; 3. Apply toothpaste to the cloth or directly onto the scratched area, then rub the scratched area firmly. Causes of car scratches: 1. During car usage, friction or collisions may accidentally scratch the paint surface, resulting in scratches of varying depths; 2. Improper car washing techniques can damage the paint, such as using excessive water pressure when rinsing, incorrect washing procedures or methods, or wiping the surface with a cloth or towel when dust is present; 3. Incorrect painting operations or improper material selection can lead to various defects on the paint surface.
6
3
Share

How to Reset the Maintenance Light on BYD Song?

Method to reset the maintenance light on BYD Song: 1. Turn the ignition switch to KEY OFF; 2. Press and hold the trip reset button below the speedometer; 3. Turn the ignition switch to KEY ON while continuing to hold the trip reset button for more than 10 seconds; 4. When three horizontal lines appear on the display, it indicates the maintenance light has been successfully reset. The BYD Song is a compact sedan equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 160PS, maximum power of 118KW at 5200RPM, and maximum torque of 245NM between 1600-4000RPM. It is paired with a 6-speed dual-clutch transmission.
8
2
Share

Where is the fuel pump relay located in the BYD F3?

The fuel pump relay of the BYD F3 is located on the wiring harness assembly, which is positioned behind the left storage compartment under the steering wheel. The BYD F3's fuel pump relay primarily functions to amplify small currents, control high-power circuits to expand the control range. When the signal reaches a certain value, it will switch, disconnect, or connect multiple circuits according to the different forms of contact groups, achieving the purpose of an automatic switch. The BYD F3 is classified as a mid-level family car, equipped with a 1.5L naturally aspirated engine. It delivers a maximum horsepower of 109 PS, a maximum power of 80 kW at 5800 rpm, and a maximum torque of 148 Nm between 2000 and 3000 rpm. It is paired with a 5-speed manual transmission.
6
5
Share

How to Add License Plate Number to New Car Insurance?

After purchasing a new car, you need to buy insurance for the vehicle before registering the license plate. This results in the first-year insurance policy not displaying the license plate number. Once you obtain the new car's license plate number, you can apply to the respective insurance company for a policy endorsement to add the new license plate number.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.