Is it better to use 92 or 95 octane gasoline for MG6?

Should You Use External or Internal Air Circulation When Driving on the Highway?

It is recommended to use external air circulation when driving at high speeds on the highway, and switch to internal circulation when the external air quality is poor. This helps maintain air circulation inside the vehicle and keeps the air fresh. Prolonged use of internal circulation can lead to excessive carbon dioxide levels in the car, causing drowsiness and fatigue, which increases driving risks. The external and internal air circulation systems in a car play a crucial role in cycling air from inside and outside the vehicle, helping to maintain an optimal temperature inside the cabin. Keeping the car sealed for extended periods can result in poor air quality, and unhealthy air intake can negatively affect the body. Driving at high speeds on the highway is generally faster, and most highways are located in suburban areas. As long as there is no traffic congestion, the air quality is usually acceptable—much better than in urban areas. Many drivers prefer to switch between external and internal circulation when the external air environment is good. However, there is another consideration: the high speed of highway driving. Under normal circumstances, when external air circulation is activated, small openings under the front hood of the car allow for air convection. However, the engine compartment houses the engine, which generates significant heat. When external circulation is on, hot air from outside can be blown into the cabin at high speed through these openings. While the air conditioning can mitigate this effect to some extent, it may require adjusting the temperature settings to compensate.

7

0

Share

How to Deal with White Spots on Car Paint After Using a Car Cover?

White spots on car paint can be cleaned with a cleaning wax, provided that the spots are in the early stages and have not penetrated the paint. If cleaning wax fails to remove the spots, polishing is the next option. While polishing can restore the paint surface, it is a consumable maintenance method. If neither of these methods works to remove the white spots, the only remaining and most costly solution is a full car repaint.

10

4

Share

How to reset the tire pressure warning light on Wuling Journey?

First, turn off the vehicle and then restart the power supply to check for any issues. Press and hold the SET button with the tire pressure gauge symbol on the right front of the gear lever for a long time, then press and hold the tire pressure monitoring button until the light goes off. Release the button at this point to eliminate the tire pressure warning light on the dashboard.

13

4

Share

How to Set the Dashboard of the Sylphy?

When the ignition switch is in the ON position, this odometer, dual trip meter, and fuel consumption information display will appear. Press and hold the reset switch to reset the single trip meter to zero. Press the menu button once to enter the hour adjustment mode, and use the zero/adjustment button 9 to adjust the hour. Turn off the ignition switch and hold down the zero/adjustment button. Turn on the ignition switch and release the button. Press the button, and the maintenance cycle indicator will be reset to zero.

9

4

Share

How to Remove the Gear Shift Knob on Hyundai Elantra?

To remove the gear shift knob, you must first remove the lower decorative panel. Before disassembly, make sure to prepare a plastic clip pry tool for the process. After removal, you can observe the alignment between the clips at various positions and the protrusions on the lower mounting base. Once the decorative panel is removed, you will see the connected wiring harness plug. Simply disconnect it. Hold the gear shift knob firmly and pull it upward with force to detach it from the gear shift lever.

3

0

Share

What Causes Severe Engine Idle Vibration?

Severe body vibration during idle is primarily caused by heavy carbon buildup in the engine, leading to dirty throttle bodies or excessive carbon deposits in fuel injectors. The lower the temperature, the more fuel is required for cold starts, and carbon deposits significantly affect the smoothness of cold starts. Solution: Clean the fuel system and check if the idle control valve has carbon buildup that needs cleaning. For ignition system issues, inspect the condition of spark plugs, high-voltage wires, and ignition coils. Poor ignition system performance or weak spark plug firing can also cause such symptoms. Abnormal fuel pump pressure or malfunctioning intake pressure sensors may also trigger body vibration. Vibration locations: Distinct engine vibration can be felt from beneath the seats, with slight steering wheel vibration. Opening the door and placing a hand on it will also clearly reveal engine vibration.

14

2

Share

Is it better to use 92 or 95 octane gasoline for MG6?

Should You Use External or Internal Air Circulation When Driving on the Highway?

How to Deal with White Spots on Car Paint After Using a Car Cover?

How to reset the tire pressure warning light on Wuling Journey?

How to Set the Dashboard of the Sylphy?

How to Remove the Gear Shift Knob on Hyundai Elantra?

What Causes Severe Engine Idle Vibration?

How to Reset the Sunroof on a Ford Edge?

How long after obtaining a Class B driver's license can I upgrade to a Class A license?

How to Adjust the Throttle in Driving Test Subject 3?

How to Read the Fuel Gauge in Golf 8?