Is it better to turn off the engine at a red light on a motorcycle or not?

1 Answers
VonBraxton
07/30/25 7:48am
It depends on the duration of the red light. If it's more than thirty seconds, it's better to turn off the engine. Here are some precautions for riding a motorcycle: 1. Safety helmet: Always wear a helmet when riding a motorcycle. Not wearing one can result in a fine if seen by traffic police, and it also compromises safety. 2. Slow speed: Never exceed the speed limit when riding a motorcycle. Many traffic accidents involving motorcycles are caused by speeding, so for safety, avoid speeding and ride slowly. 3. Avoid carrying passengers: Try not to ride with others on the motorcycle, and especially avoid carrying multiple people at once. This is very dangerous as it leaves no time to react in case of an emergency.
Was this review help?
6
4
Share
More Forum Discussions

Where is the fuse table for Mercedes-Benz C200 located?

Mercedes-Benz C's fuse allocation table is located in the storage basin under the trunk floor. The box in front of the driver in the engine compartment (above the left front wheel) is the fuse box. Since the thickness and length of fuses vary according to the vehicle model, it is essential to replace fuses with original ones to ensure the proper functioning of electrical components. Related introduction: 1. Introduction: A fuse box refers to the box (also known as a fuse holder) where fuses are installed, making it convenient to install fuses. Some fuse boxes have features such as waterproofing, fire resistance, and high-temperature resistance (depending on the material and shape). Fuse boxes can be categorized into lead-type fuse boxes and automotive fuse boxes. 2. Material: Common injection molding materials for fuse boxes include plastic, nylon, bakelite, and PBT engineering plastic. Each material has different high-temperature resistance levels. When selecting a fuse box, consider the current size of the fuse being used and the size requirements of the fuse. The larger the fuse current, the larger the wire size that should be used with the fuse box to prevent overheating of the fuse box and wires, which could lead to a fire.
7
1
Share

What are the green channel standards for refrigerated trucks?

It requires four certificates to be complete, and the transportation volume must be more than 80% of the vehicle's capacity, with no severe overloading or exceeding limits. Additional information: Refrigerated truck insulated compartment: The refrigeration unit of a refrigerated truck is used for temperature regulation, while the compartment is used for temperature maintenance. If the refrigeration unit is the energy provider, then the compartment is the energy storage. Among the three major components of a refrigerated truck, the refrigeration unit and the insulated compartment are the most important. The chassis can be removed to serve as a small insulated or refrigerated storage. The selection of the compartment generally follows several points: good insulation performance, lightweight, and not easily damaged. Refrigerated truck refrigeration unit: An essential device that continuously provides "cold" to the refrigerated truck container. It is usually installed on the top front of the container, with an air-conditioner-like appearance but stronger cooling capacity than air conditioners of the same size. The selection of the refrigeration unit for a refrigerated truck is generally based on the volume of the refrigerated compartment and the temperature requirements of the transported goods to choose refrigeration units with different power and cooling capacities.
10
3
Share

Does the Oshan X5 have only one reverse light?

The Oshan X5 has one reverse light, and the other light is a fog light. Introduction to reverse lights: Reverse lights are installed at the rear of the car to illuminate the road behind and warn vehicles and pedestrians that the car is reversing. All reverse lights are white. The reverse light, installed at the rear of the car, is used to illuminate the road behind when reversing and serves as a warning to vehicles and pedestrians behind. Reverse light models: The conventional models of reverse lights are generally divided into P21W (1156) flat single contact; W16W (T15); W21W (T20) single filament.
1
2
Share

Where is the handbrake on a Land Rover Range Rover?

On the upper left side of the gear knob of the Land Rover Range Rover, there is a silver button marked with a 'P', which is the handbrake. Simply pull it to engage the parking brake. Electronic Parking Brake: It is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both of which tighten the rear wheel brake shoes via a cable for braking. Another type uses an electromechanical caliper, where the motor clamps the brake pads to achieve parking brake control. Land Rover Range Rover: It is a luxury SUV under the Land Rover brand. The Range Rover has been meticulously designed to become the most refined and capable Land Rover ever. Utilizing the latest body and chassis technologies, whether it's the breadth of its off-road capabilities and passability or its on-road handling and comfort, the vehicle's all-terrain performance is elevated to another level.
16
5
Share

How to Use the Corolla's Recirculation and Fresh Air Mode?

The car has a button with recirculation and fresh air mode indicators; pressing it allows you to switch between the two. Fresh Air Mode: This mode opens the air intake, drawing in outside air, which is then blown into the cabin through the air conditioning vents. Recirculation Mode: This mode closes the air intake, and the blower circulates the air inside the car, meaning outside air is not involved—only the interior air is recirculated. When to Use Recirculation Mode: In summer, using recirculation mode can help save fuel; during traffic jams, switching to recirculation prevents exhaust fumes from entering the car; for most short-distance driving, recirculation mode is more fuel-efficient.
18
2
Share

How to use the plus and minus signs on the Equinox gear shift?

The usage of the plus and minus signs on the Equinox gear shift: When rapid acceleration or uphill driving is required, press the minus (-) sign to lower the transmission gear, quickly increase the engine speed, and instantly enhance the vehicle's torque. The manual mode is referred to as the sport mode, aligning with the driver's intention for a sporty driving experience. The plus (+) sign is used less frequently, as the vehicle can automatically upshift when in D gear. Additional details are as follows: 1. Pull the gear lever downward to engage D gear, then push the lever to the left until 'm/s' lights up, indicating the manual mode is engaged. 2. To increase or decrease gears in this mode, push the lever forward to downshift and pull it backward to upshift. Upshifting is not possible if the vehicle speed and engine speed do not meet the requirements, and each operation must be approved by the transmission control unit. 3. In manual mode, if the vehicle speed is low, the transmission will assist in downshifting. To revert to automatic mode, pull the lever back to the right. Manual and automatic modes can be switched at any time without the need to brake or release the accelerator.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.