Is it bad to fill up the gas tank in summer?

1 Answers
AdalineLee
07/30/25 1:45am
In this case, it is not recommended to fill up the car's gas tank in summer. Here are the relevant explanations: 1. Filling up the tank too much causes gasoline to evaporate faster: Faster gasoline evaporation first leads to energy waste. Secondly, the evaporated gasoline smell can flow into the car cabin, and long-term inhalation can affect human health. 2. Filling up the tank too much can severely reduce the performance of the carbon canister: This ultimately leads to issues such as engine shaking and increased fuel consumption. 3. There are certain safety hazards: The car's gas tank has a vent hole at the top. If the tank is filled up, gasoline can easily overflow from the vent hole. If there happens to be an open flame, the overflowing gasoline is very likely to ignite.
Was this review help?
4
3
Share
More Forum Discussions

How many cars can a two-person car wash shop wash in a day at most?

It takes about 30 minutes for two people to wash one car, and if they wash cars non-stop for 8 hours a day, they can wash approximately 16 cars. Washing cars may seem simple, but doing it quickly, well, and to the satisfaction of customers is not easy. However, car washing services are one of the most important means for auto beauty shops to attract business and retain customers. If the auto beauty industry is divided into two ends, car washing is the front end, while beauty and decoration services are the back end. The following are the hazards of not washing a car for a long time: 1. Increased fuel consumption: Dust or debris falling on the car will accumulate over time, adding some weight to the vehicle, and dust may enter various systems inside the car, thereby increasing fuel consumption. 2. Damage to the car paint: Rain can cause grease from dust to adhere to the car paint, forming a layer of sludge, which over time may cause damage to the interior of the car paint. Additionally, rain in some industrial areas has high acidity, and this acid rain adhering to the car can lead to oxidation and corrosion of the car paint over time. 3. Increased car maintenance costs: Washing the car every half month or month can protect the car paint and make it look more attractive. Not washing the car for a long time can damage the car paint, and repairing it will cost more money.
18
3
Share

What does a second-hand bare car mean? Can it still be transferred?

A bare car refers to the price of the vehicle, excluding other taxes and service fees. A second-hand bare car means the vehicle cannot be transferred, while having the proper documentation indicates the vehicle can be transferred. The original owner of a second-hand car needs to provide the following documents for transfer: registration certificate, driving license, ID card, etc. The buyer needs to provide an ID card. Below are methods to check if a second-hand car has been in an accident: 1. Check the production date of the glass: Normally, the glass wouldn't be replaced, so checking the production date of the glass can be helpful. The glass date is usually in the form of numbers + dots, where the numbers represent the year and the dots represent the month. 2. Check the wear and tear of the frame: If the car has been in a major accident, the body frame will have varying degrees of dents and misalignment. Therefore, the wear and tear of the frame can indicate whether the car has been in a major accident. 3. Check the screws: Inspect the screws on the hood, radiator support, and door connections. If any of these screws show abnormalities, it can be concluded that the car has been in a major accident. 4. Check the maintenance records: You can inquire about the maintenance records at a 4S shop. Any accident car repaired at a 4S shop will have systematic records.
11
4
Share

How many seconds does the Lavida 1.4T take to accelerate from 0 to 100 km/h?

According to official data, the Lavida 1.4T model accelerates from 0 to 100 km/h in 8.3 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque generally indicates how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The maximum torque of the Verano is 250 Nm, with a 0-100 km/h acceleration time of 7.7 seconds. The Lavida 1.4T has a torque of 250 Nm and accelerates from 0 to 100 km/h in 8.3 seconds. Transmission efficiency: The transmission serves as the medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Lavida is equipped with a dry dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Verano has a power-to-weight ratio of 137 Hp/T, with a 0-100 km/h acceleration time of 7.7 seconds. The Lavida has a power-to-weight ratio of 114 Hp/T, accelerating from 0 to 100 km/h in 8.3 seconds.
18
0
Share

What is the function of the steering wheel?

The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. The steering wheel is a very important vehicle configuration. With the continuous improvement of automotive science and technology, the steering wheel has evolved from a single steering function in the past to a multifunctional type. Nowadays, the functions of the steering wheel are quite comprehensive, such as gear shifting on the steering wheel and cruise control on the steering wheel. The following is an introduction to the types of steering wheels: 1. Single-spoke steering wheel: Single-spoke steering wheels were widely used in early vehicles. Since vehicles at that time rarely had power steering devices, the steering would be very heavy during driving, sometimes requiring the use of hand-over-hand techniques to turn the steering wheel. Therefore, the large inner diameter space of the single-spoke steering wheel made it very convenient to use. However, with the application of power steering, the single-spoke steering wheel ended its historical mission. 2. Double-spoke steering wheel: The double-spoke steering wheel is basically similar to the single-spoke steering wheel. It was also used in early vehicles, but because the double-spoke steering wheel was difficult to support the installation of airbags, it is rare to see vehicles equipped with double-spoke steering wheels in modern cars. However, double-spoke steering wheels can still be seen in light trucks. 3. Three-spoke and four-spoke steering wheels: These are the steering wheels widely used in current cars. The common feature of these two types of steering wheels is that they both have a large central space for installing airbags. From an aesthetic perspective, the three-spoke type is very dynamic, while the four-spoke type gives a solid feeling.
20
5
Share

What is the method for wiring a seat heating switch?

Seat heating switch wiring method mainly includes: 1. First, test whether the ACC is powered. 2. When the ACC is disconnected, the main line also needs to be disconnected. 3. Pull the key to the power-off position to take power. 4. Secure the two wire ends, and finally tighten the seat wiring. Extended content: 1. Car seats are the seats used when riding in a car. 2. They can be roughly divided into the following parts: (1) Front seats: headrest, backrest, seat cushion, (armrest). (2) Rear seats: (headrest), backrest, seat cushion, side wings, (armrest).
2
3
Share

What are the steps to eliminate the wrench light on Mazda CX4?

First, press the one-touch start button of the CX5. Then press the INFO button on the left side of the multifunction steering wheel, followed by the SET button on the right side of the steering wheel. At this point, the central LCD screen will display the vehicle maintenance information. Finally, press the OFF button at the lower right of the steering wheel, and the small wrench light will be eliminated. If the engine oil is not replaced for a long time, it will cause significant harm to the engine. The lubrication effect will not be as effective as before, and the wear between parts will increase.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.