Is it allowed to tow a vehicle on the highway?

1 Answers
DelAndrew
07/29/25 6:14pm
Private towing on the highway is not allowed, as it is considered a traffic violation. However, highway regulations permit towing by rescue vehicles. If a motor vehicle breaks down or is involved in a traffic accident on the highway and cannot be driven normally, it must be towed or pulled by a rescue vehicle or a wrecker. There are clear regulations regarding the towing of stranded vehicles on highways. According to Article 21 of the 'Highway Traffic Management Regulations,' except for rescue vehicles and wreckers, other vehicles are prohibited from towing broken-down or accident vehicles off the highway. Additionally, rescue vehicles or wreckers must activate their warning lights and hazard flashers during operations to prevent unnecessary harm to other vehicles. Since ordinary vehicles or tow trucks from companies of varying quality generally lack the necessary equipment, warning tools, and rescue qualifications that professional rescue vehicles possess, attempting a rescue without proper preparation on the unique conditions of a highway could lead to secondary accidents. Therefore, national regulations stipulate that highway towing must be performed by professional rescue vehicles to ensure safe and effective measures.
Was this review help?
12
5
Share
More Forum Discussions

Can the C1 and E licenses be taken together?

C1 and E licenses cannot be taken together. Here are the specific details about the C1 and E licenses: C1: The C1 driver's license is a type of driver's license code that permits driving small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special operation vehicles, among others. Applicants can directly apply for the license with their resident ID card at any location nationwide without submitting proof of residence registration. E license: The E-class driver's license indicates that the holder is permitted to drive light motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. No other vehicle types are permitted.
3
2
Share

Where is the rearview mirror heating switch on the Nissan Sylphy?

The rearview mirror heating function of the Nissan Sylphy is integrated with the rear windshield heating function button. Pressing this button simultaneously heats both the rearview mirrors and the rear windshield. Its location is on the air conditioning panel. Rearview mirrors equipped on the Sylphy: The Sylphy is equipped with either electric or manual exterior rearview mirrors. Adjust the exterior rearview mirrors before driving to ensure a clear view of the area behind the vehicle. Precautions for using rearview mirror heating: When heating the rearview mirrors, do not touch the mirror surface to check the temperature with your hands. The heating temperature of the rearview mirrors can reach up to 60 degrees Celsius, posing a burn risk, especially to children.
13
5
Share

Why is there no sound from the Audi A4 player?

Audi A4 player has no sound for the following reasons: Cigarette lighter socket voltage issue: If the player has no sound, check the cigarette lighter socket to see if there is normal voltage output to the MP3 player. FM transmitter module issue: For the player's FM transmitter module, turn on the player and the radio, adjust the frequency to match, and listen carefully to see if there is significant noise from the radio. If there is a lot of noise, it indicates a fault in the FM transmitter module. MP3 module issue: For the player's MP3 module, if the player and radio are turned on and the radio does not emit noise or the sound is very quiet, it means the FM transmitter module is functioning properly, and the problem lies with the MP3 module.
5
4
Share

What causes the Audi A4L to experience weak acceleration accompanied by shaking?

Audi A4L experiencing weak acceleration accompanied by shaking can be caused by: carbon buildup in the car or substandard fuel. Here are the specific reasons: Carbon buildup in the car: Carbon deposits include cylinder carbon buildup, throttle carbon buildup, spark plug carbon buildup, intake carbon buildup, etc. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the car's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and resulting in shaking and weak acceleration. Substandard fuel: Using an incompatible fuel grade can cause the car's output power to decrease, leading to reduced performance. Alternatively, if the fuel tank vent is blocked, it may not meet the required fuel supply, resulting in a lean air-fuel mixture and weak engine acceleration.
14
2
Share

Where is the fan motor in the center armrest of the Mercedes-Benz S400L?

The main fan motor is located above the main fan, while the secondary fan is belt-driven and does not have a motor. Function of the car fan: The car fan blows air towards the radiator to cool it down and dissipate heat from the engine. When the fan rotates, it creates suction, accelerating the airflow along the axial direction, thereby speeding up the cooling of the coolant passing through the radiator core. At the same time, it cools the engine block housing and surrounding components. Engine cooling system: The car engine must be properly cooled in high-temperature working environments to maintain an optimal operating temperature. This ensures good engine performance, durability, and meets exhaust emission requirements.
19
5
Share

What is the difference between the blue label and yellow label of compulsory traffic insurance?

The main difference between the yellow inspection label and the blue inspection label lies in the year of the inspection deadline. Below are the specific details about the inspection labels: Cycle: To enhance the recognizability of inspection labels, the vehicle management office uses different colors to distinguish between years. The colors of the inspection labels follow a sequence of yellow, green, and blue, with a three-year cycle. Placement: The vehicle inspection label must be affixed to the upper right corner of the front windshield. During routine checks by traffic police, they typically judge whether a vehicle has passed inspection based on the color of the label, unless there is a special reason to do otherwise. If the color of the inspection label were the same every year, vehicles would need to be stopped for verification during checks.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.