···
Log in / Register

Is it allowed to temporarily park while driving a motor vehicle in a tunnel?

3 Answers
JulianFitz
07/29/25 7:47pm
When driving a motor vehicle in a tunnel, temporary parking is not allowed. Motor vehicles are prohibited from parking at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. Temporary parking of motor vehicles on the road should comply with the following regulations: 1. Parking is prohibited in sections with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, crosswalks, and construction areas; 2. Parking is prohibited at intersections, railway crossings, sharp turns, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations; 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (posts), and within 30 meters of these locations, except when using these facilities.
Was this review help?
5
0
Share
ODylan
08/14/25 3:20pm
I work in road safety consulting, and temporary parking inside tunnels is absolutely unacceptable! The space is so narrow that it can easily cause traffic congestion. What's even more dangerous is that visibility is already low, and stopping could lead to rear-end collisions. The ventilation system in tunnels is poor, and exhaust fumes accumulate quickly. Prolonged stays can increase carbon dioxide levels, posing health risks. According to traffic regulations, stopping is only allowed in emergency situations, such as vehicle breakdowns, and only in designated emergency zones with hazard lights on. Always check your vehicle's condition before driving, such as tires and brakes, to avoid breakdowns on the road. Remember, the smart choice is to find a safe place to park immediately after exiting the tunnel. Safe driving is no joke—it concerns your life and the lives of others. Don't break the law for momentary convenience.
Was this review help?
17
5
Share
Expand All
MacSienna
10/15/25 7:25am
I've been driving for over a decade, often taking long-distance trips, and the rule about not stopping in tunnels is absolutely crucial. Last time I was on the highway entering a tunnel when my car suddenly started shaking. I managed to slowly drive out before stopping. Inside tunnels, the lighting is dim, winds are strong, traffic is heavy, and speeds are high—making any stop highly likely to cause chain-reaction collisions. The rule against temporary stops exists to protect everyone's safety. If your car truly breaks down and requires an emergency stop, first check for an emergency lane, then turn on your hazard lights and place a warning triangle, and call for help immediately. Never lazily stop in the middle—poor ventilation systems can worsen pollution. Develop good habits: check oil, water, electricity, and gas before departure; pay attention to road signs; never underestimate these small details. Driving risks are everywhere—only by following the rules can we ensure safety.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Can the new owner use the car if the ownership is transferred but the insurance is not?

Car ownership is transferred but the insurance is not, the new owner can use it, but if an accident occurs, the insurance company has every reason to refuse compensation. Therefore, when buying a used car, you must pay attention to the timely transfer of insurance. The following is a related introduction to car insurance: Overview: Car insurance refers to a commercial insurance that compensates for personal injury or property loss caused by natural disasters or accidents to motor vehicles. Classification of car insurance: Commercial insurance is an indefinite value insurance, divided into basic insurance and additional insurance, among which additional insurance cannot be independently insured. Basic insurance includes third-party liability insurance and vehicle loss insurance (car damage insurance); additional insurance includes full vehicle theft insurance (theft insurance), on-board liability insurance, no-fault liability insurance, falling cargo liability insurance, glass breakage insurance, vehicle suspension loss insurance, spontaneous combustion loss insurance, new equipment loss insurance, and no-deductible special insurance.
6
2
Share

What is the fuel tank capacity of the Toyota Land Cruiser V8?

The fuel tank capacity of the Toyota Land Cruiser V8 is 138 liters, as officially announced. The Toyota Land Cruiser V8 requires 95-octane fuel, with a fuel consumption of 13.6-14.7L per 100 kilometers. A full tank can cover a distance of 938-1014km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel filled may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
19
5
Share

What Do the Red and Green Lights on an Automotive Test Pen Indicate?

Automotive test pen red and green lights represent respectively: the red light indicates an increase in voltage, while the green light indicates a decrease in voltage. Below is relevant information about automotive test pens: Definition: An automotive test pen, also known as an automotive voltage tester or test light, is a commonly used circuit testing tool for automotive electricians during activities such as installing additional electrical components, modifying circuits, and performing repairs. Function: It is used to detect whether there is voltage at the test point in an automotive circuit. For precise measurements, a multimeter is still required. Structure: An automotive test pen consists of a barrel; at the front end of the barrel, there is a metal tip called the probe, which is used to contact the test point; inside the barrel, there is an indicator light (a small bulb or LED); at the rear end of the barrel, there is a wire with a clip attached. Some automotive test pens also include a fuse.
8
2
Share

What does an exclamation mark on an electric vehicle mean?

This indicates a power supply failure in the electric vehicle. This warning light usually illuminates along with other fault lights, indicating a power supply issue. If this light comes on alone, it means there is a communication failure in the system bus. Causes of motor failure: The main reasons for motor failure are either a damaged motor Hall element or a faulty motor bearing. A damaged motor Hall element typically manifests as the electric vehicle not moving, having weak acceleration, shaking, making loud noises, or requiring a push to start. A faulty motor bearing usually causes loud abnormal noises from the motor, and in severe cases, it can lock up the motor, cutting off power to the entire vehicle. Methods to handle brake power-off faults: Brake power-off faults mainly manifest as a faulty brake power-off switch, the vehicle not moving when the brake is not released, or an open circuit in the brake power-off line. If the power-off fault is caused by a faulty brake power-off switch, it can be resolved by polishing the contacts and adjusting the spring plate. If this doesn't work, replacement is necessary. If the power-off fault is caused by the vehicle not moving when the brake is not released, the brake pads or the entire brake assembly should be replaced. If the power-off fault is due to an open circuit in the brake power-off line, replacing the line is the solution.
7
0
Share

What is the oil specification for Toyota Camry 2.4?

Toyota Camry 2.4 normally requires 5W-30 viscosity oil for maintenance. If the mileage is high, it is recommended to use 5W-40 or 0W-40 viscosity oil for better performance. For subsequent oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so it's important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the engine. The latter number represents the kinematic viscosity of the oil at 100°C. A higher number indicates better viscosity retention at high temperatures, meaning better lubrication performance under high-temperature conditions. The method for changing the oil in a Toyota Camry 2.4 is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan. Loosen the drain plug with a wrench and place an oil pan underneath to collect the old oil until it stops draining. Start the engine for about 30 seconds to allow the oil in the main oil passages to flow out. Remove the oil filter using a special wrench. Apply some oil to the seal of the new oil filter and screw it on clockwise by hand. Add new oil through the oil filler cap on the engine valve cover. Typically, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
9
5
Share

Where is the Ford Mondeo engine produced?

Ford Mondeo engines are domestically produced, manufactured at Changan Ford's Chongqing plant. Imported Ford engines are produced in the UK, with some models also manufactured in the US. The Ford Mondeo engine is a 1.5L L3 with natural aspiration intake, delivering a maximum horsepower of 122ps and a maximum torque of 152nm. For daily maintenance of the Ford Mondeo engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly replace the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve, carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.