Is it allowed to reverse in a tunnel?

1 Answers
QuinnMarie
07/29/25 7:29pm
Reversing in a tunnel is not permitted, as doing so at intersections or in tunnels can obstruct the normal flow of other vehicles, making it inadvisable. According to traffic management laws and regulations, drivers who fail to comply with traffic regulations regarding overtaking, yielding, or driving in the opposite direction will have 3 points deducted from their license at once; drivers who reverse, drive in the opposite direction, or make U-turns across the central divider on highways will have 12 points deducted from their license at once. Tunnels are passages specifically designed for vehicular transport. With the development of the social economy and production, the emergence of numerous highways has raised higher standards for road construction, requiring straight routes, gentle slopes, and wide road surfaces, among others. The construction of tunnels plays a significant role in improving the technical conditions of highways, shortening travel distances, enhancing transport capacity, and reducing accidents.
Was this review help?
19
3
Share
More Forum Discussions

Is it acceptable if the car body touches the line during the Subject 2 driving test?

Body touching the line means the car body crosses the line. In the Subject 2 driving test, crossing the line will result in a 100-point deduction, making the test unsuccessful. In addition to body crossing the line, other actions that will result in a 100-point deduction include failing to park properly in reverse, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time. The full score for Subject 2 is 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The test is considered passed under the following conditions: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. If the Subject 2 test is failed, one retake is allowed on the spot. If the applicant does not take the retake or fails it again, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving test permit, the number of retakes for Subject 2 and Subject 3 road driving tests cannot exceed five. If the fifth retake is still failed, the results of other previously passed subjects will be invalidated.
19
3
Share

How Long Can a Newly Purchased Motorcycle Be Driven Without License Plates?

Newly purchased motorcycles cannot be driven on the road without license plates. Otherwise, 12 points will be deducted from the driver's license, and a fine will be imposed. However, there are two opportunities to apply for temporary license plates, each valid for 15 days. Eligibility and Scope for Applying for Temporary License Plates: When driving the vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the local vehicle management office where the vehicle was purchased. If the vehicle is being transferred and the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the original location. The process and procedures for applying for temporary license plates include: The applicant must provide a letter of introduction from their unit, proof of vehicle origin, the vehicle's certificate of conformity, and other relevant documents (except for the letter of introduction, which will be archived, the rest will be returned to the applicant). The application must specify the starting and ending locations of the vehicle's journey and the duration of the temporary license plate. After review by the management staff and a satisfactory vehicle inspection, the temporary license plate will be issued, with the validity period and route clearly indicated. Method for Attaching Temporary License Plates: Two temporary license plates must be attached: one should be placed on the upper right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view and should not be covered by the compulsory insurance label. The other should be placed on the upper left corner of the rear windshield inside the vehicle.
7
0
Share

What Causes Car Wobbling?

Car wobbling can be attributed to several factors from the perspective of wheel balance: Wheel imbalance is a common issue in many vehicles. During manufacturing, tires and rims cannot guarantee perfectly uniform quality, and worn tires may lead to rotational imbalance, subsequently causing body sway. From the perspective of steering gear clearance: Over time, the meshing gears and racks wear out, creating play between them, which results in a sensation of body wobbling. From the suspension framework perspective: Suspension components are connected via ball joints and rubber bushings. However, as these ball joints and bushings wear out, the components may loosen, leading to a loose suspension system that causes body wobbling during driving.
5
4
Share

Can the Subject 2 Test Be Taken Twice in a Row?

Subject 2 can be taken twice in a row. Here is the relevant information: Test Items: The motor vehicle driving Subject 2 test consists of five test items. The first item is reversing into a parking space, the second is parallel parking, the third is stopping and starting on a slope, the fourth is turning at a right angle, and the fifth is driving on a curved path. These must be completed in order to pass the test. Test Opportunities: There are a total of five test opportunities for the motor vehicle driving license Subject 2 test. If after five successful test registrations and attempts, the Subject 2 test is still not passed, the qualification for the Subject 2 test will be canceled, and no further attempts can be made. To re-obtain the license, one must register again.
12
5
Share

Do I Need to Practice Driving for Subject 2 Every Day?

Subject 2 does not require daily practice. The following points should be noted for Subject 2: 1. Mock Test: The purpose of a mock test is to familiarize the candidate with the exam environment and allow the instructor to point out areas where points are easily deducted. Therefore, mock tests are absolutely essential, and thorough preparation is the best way to face the exam. 2. Ensure Adequate Sleep: It is crucial to get a good night's rest the day before the exam to avoid involuntary nervousness or dizziness during the test. 3. Bring Your ID Card: You must bring your ID card to the exam. Without it, you cannot participate, and all your preparation would be in vain. Additionally, make sure to turn off your mobile phone during the exam, as any activity from the phone could be considered cheating.
8
2
Share

Where is the windshield washer button on a Mercedes-Benz?

The windshield washer button on a Mercedes-Benz is located on the turn signal switch. To activate the washer function, pull the wiper control lever toward the driver. If you use it frequently, remember to check the washer fluid level and replenish it promptly when low to avoid dry wiper operation. When the windshield transparency deteriorates, especially during night driving when dust on the glass scatters light, use the washer fluid to maintain optimal visibility. Taking the 2021 Mercedes-Benz C260 Star Edition as an example, its dimensions are 4704mm in length, 1810mm in width, and 1454mm in height, with a wheelbase of 2840mm. Powering this model is a 1.5T turbocharged engine paired with a 48V mild hybrid system, delivering a maximum power of 135 kW and a peak torque of 280 Nm.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.