Is it allowed to press the accelerator in Subject 2 test?

What happens if you are caught by traffic police driving a motorcycle with only a C1 driver's license?

C1 driver's license upgrading to B2 driver's license requires passing exams and meeting the following conditions: Age between 20 and 60 years old; height not less than 155cm; holding a C1 driver's license for at least 1 year; no record of accumulating 12 penalty points in the current and the most recent scoring cycle before application; visual acuity must reach 5.0 or above on the logarithmic visual acuity chart; no record of drunk driving or causing a fatal traffic accident with primary responsibility while holding a C1 driver's license. Specific process for applying for a B2 driver's license: Apply to the vehicle management office for upgrading to a B2 driver's license; fill out the application form, submit ID card and physical examination form, and provide the original copy of the current motor vehicle driver's license; attend theoretical and practical exams as scheduled; the new grade driver's license will be issued by the applying vehicle management office within 7 working days after passing the exams.

18

1

Share

What Causes Shaking During Acceleration?

The causes of shaking during acceleration are: 1. Poor fuel delivery: Insufficient fuel supply at low throttle causes uneven operation of engine cylinders, resulting in shaking; 2. Dirty throttle valve: Uneven intake airflow leads to shaking; 3. Broken or burnt high-voltage wires or spark plug failure causing some cylinders to misfire, making engine operation unstable and resulting in shaking. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold-start injector can be largely absorbed by the carbon deposits, leading to an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine can only start easily after the carbon deposits have absorbed enough gasoline to reach saturation. Once started, the gasoline adsorbed on the carbon deposits is drawn into the cylinders by the engine's vacuum suction and burned, making the air-fuel mixture too rich. The fluctuating air-fuel mixture (alternating between lean and rich) causes idle shaking after a cold start.

10

5

Share

What Type of Engine Oil is Suitable for Cadillac?

Cadillac is suitable for the following types of engine oil: For turbocharged engines, it is recommended to use 0W40 or 5W40 full synthetic oil; for naturally aspirated engines, it is recommended to use 0W30 or 5W30 full synthetic oil. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a car. Cadillac is a world-renowned luxury automobile brand under General Motors. Taking the Cadillac CT5 as an example, it is a mid-sized sedan under the Cadillac brand, with body dimensions of 4924mm in length, 1883mm in width, and 1453mm in height.

19

5

Share

How to Determine the Amount of Antifreeze?

The indicator lines on the antifreeze reservoir mark the maximum and minimum levels of antifreeze that can be added. When the antifreeze level falls below the minimum mark, it indicates a deficiency, signaling the need for timely replenishment. Below are relevant details: 1. The full name of antifreeze should be "antifreeze coolant," meaning a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing in cold winter conditions, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. 2. There are many types of automotive antifreeze agents, such as calcium chloride (CaCl2) among inorganic compounds, methanol (CH3OH), ethanol (C2H5OH, commonly known as alcohol), ethylene glycol (C2H4(OH)2), glycerol (C3H5(OH)3, commonly known as glycerin), lubricating oils, as well as everyday substances like sugar and honey. These can serve as the base liquid for antifreeze. When mixed with an appropriate amount of pure soft water (water containing little or no calcium or magnesium ions, such as distilled water, uncontaminated rainwater, or snowmelt, with a total hardness concentration between 0-30 ppm), they form what is generally referred to as antifreeze.

11

3

Share

How to Clear the Maintenance Reminder on Changan CS75?

Changan CS75 maintenance reminder clearing method is as follows: 1. Turn the car key to the ON position (turn the key twice, or press the start button twice for keyless start). 2. Press the selection button on the steering wheel. 3. Press the reset button for about 5 seconds (hold the reset button down without releasing it). 4. Turn off the power, keeping the reset button pressed, then turn the power back on to clear the maintenance reminder. Below is information about maintenance: 1. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down deterioration, and extend the service life. 3. Daily maintenance refers to routine checks performed before driving, during driving, and after parking, which are the responsibility of the driver. The main tasks include cleaning, replenishing, and safety inspections, which are essential for maintaining the vehicle's normal working condition.

8

0

Share

How to turn on the cold air in Emgrand GS?

To activate the air conditioning in the Geely Emgrand GS, follow these steps: First, turn on the blower, then adjust the temperature, and finally press the AC switch. Below is an introduction to its air conditioning operation principle: 1. When the Geely Emgrand GS air conditioning compressor is working, it inhales low-temperature and low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant rise, and it is sent to the condenser. 2. Inside the condenser, the high-temperature and high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser and liquefies, turning into a liquid. 3. When the liquid refrigerant flows through the throttling device, its temperature and pressure decrease, and it enters the evaporator. 4. Inside the evaporator, the low-temperature and low-pressure liquid refrigerant absorbs heat from the cabin air passing through the evaporator and evaporates, turning into gas. The gas is then inhaled by the compressor for the next cycle. 5. Through the circulation of the refrigerant in the system, it continuously absorbs heat from the cabin air and discharges it to the outside air, gradually lowering the temperature of the cabin air in the Geely Emgrand GS.

7

4

Share

Is it allowed to press the accelerator in Subject 2 test?

What happens if you are caught by traffic police driving a motorcycle with only a C1 driver's license?

What Causes Shaking During Acceleration?

What Type of Engine Oil is Suitable for Cadillac?

How to Determine the Amount of Antifreeze?

How to Clear the Maintenance Reminder on Changan CS75?

How to turn on the cold air in Emgrand GS?

What is the displacement of the Audi S3?

Is the Auto Loan Contract Given to the Car Owner?

What are the reasons for a push-to-start car not starting when cold?

How to reset the maintenance reminder on a Haval?