Is it allowed to make a U-turn at an intersection?

How to Deal with Water Under Car Floor Mats?

You can first remove the soaked carpet or floor mats, then clean up the remaining water inside the car. Below is an introduction to car floor mats: 1. Car floor mats are an eco-friendly automotive interior component that integrates five main functions: water absorption, dust absorption, stain removal, sound insulation, and protection of the main carpet. Car floor mats are interior decorations that help maintain cleanliness inside and outside the vehicle, adding aesthetic and comfortable touches. 2. Do not fully immerse the floor mats in water for scrubbing, as this can damage the bonding between the different material layers inside the mats. Additionally, it may cause the mats to take a long time to dry, affecting their performance and leading to dampness inside the car. 3. Car floor mats absorb water, dust, and stains, effectively preventing residual moisture and dirt from shoes from causing slippage between the clutch, brake, and accelerator pedals. This eliminates safety hazards and reduces the likelihood of interior contamination and damage. After all, cleaning floor mats is more convenient and economical than cleaning the interior.

9

4

Share

What is the engine model of the 2021 BJ40 diesel version?

The engine model of the 2021 BJ40 diesel version is G4CA, with a maximum power of 120kW, a maximum torque of 380 Nm, and a maximum horsepower of 163. The engine of the 2021 BJ40 diesel version is produced by the Swedish SAAB automobile company and belongs to the category of engines manufactured in Sweden. For daily maintenance of the 2021 BJ40 diesel version engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly based on usage conditions and keep the oil volume moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve, bringing dirt back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates from the oil, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

18

3

Share

What is the fuel tank capacity of the CRV?

The fuel tank capacity of the Honda CRV is 53 liters, which is the officially announced data. Owners who have purchased the Honda CRV can also check this information on the vehicle's configuration sheet. The Honda CRV uses 92-octane fuel, with a fuel consumption of 4.9 to 7.3L per 100 kilometers. A full tank of fuel can cover a distance of 726 to 1082 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.

9

0

Share

What to Do When the Wuling Rongguang's Battery is Dead and the Car Won't Start?

If the battery is dead and the car won't start, you can try push-starting, jump-starting with jumper cables, or towing it to a 4S shop for repair using a flatbed rescue vehicle. The lifespan of a Wuling Rongguang battery is generally 2 to 3 years. Beyond this period, pay special attention to battery maintenance and replace it promptly when necessary to avoid potential hazards. Here are more detailed solutions: 1. Push-starting: Push-starting is the most familiar and effective emergency starting method, but it should only be used as a last resort and not frequently. This method can cause some damage to the engine and clutch, especially in automatic transmission vehicles, which should avoid this method. If there are no passengers, try asking pedestrians for help. First, shift into first gear, press the clutch, turn the key to the ACC position, and have helpers push the car from behind. Once the car gains speed, release the clutch, and the car will start due to inertia. 2. Jump-starting with jumper cables: If you don't have an emergency starter, you can ask nearby car owners for help to jump-start your car. Be careful not to connect the positive and negative terminals incorrectly—remember, positive to positive and negative to negative. Otherwise, connecting positive to negative will cause a short circuit. Locate the batteries of both cars, identify the positive and negative terminals (usually marked with a red cover and a plus sign). Remove the terminal covers and clamp the red jumper cable onto the positive terminal. Connect the red cable first, then the black one. Once all four terminals are connected, the jump-start is ready. After the cables are connected, start the dead car to charge the battery. 3. Towing: As a last resort, you can tow the car. First, find a sturdy tow rope and securely tie the front and rear of both vehicles together. Then, start towing slowly, ensuring both cars maintain the same speed. Pay attention to traffic safety and notify the towing vehicle if another car approaches from behind, then slowly pull over to the roadside.

14

0

Share

What to Do If Your Car Is Repossessed Due to Loan Default?

Loan companies do not have the right to repossess a car, even if the auto loan is overdue. They can sue you in court, but repossessing the vehicle is not a lawful action. First, consider filing a police report to seek mediation by the authorities. Second, initiate a civil lawsuit in the court where the loan company is located, demanding the return of the vehicle. As for towing fees and additional loan charges, if they are not stipulated in the contract, you are not obligated to pay them. Moreover, you can claim compensation for personal losses incurred during the period the vehicle was repossessed. An auto loan refers to the credit extended by lenders to borrowers for purchasing cars. Auto consumer loans are a new form of secured RMB loans provided by banks to buyers purchasing vehicles from their authorized dealers. The auto loan interest rate is the ratio of the loan amount issued by the bank to the consumer (or borrower) for purchasing a personal-use vehicle (non-commercial passenger cars or 7-seater and below business vehicles) to the principal. The higher the interest rate, the larger the repayment amount for the consumer. If the default reaches a severe level, it may constitute malicious overdraft, which could be adjudicated as credit card fraud. Sentencing standards will be based on the amount of the malicious overdraft, ranging from less than 5 years, 5 to 10 years, or more than 10 years of imprisonment to life imprisonment, along with fines or confiscation of property.

20

1

Share

What is the working pressure of automotive air conditioning R134a refrigerant?

Automotive air conditioning R134a refrigerant pressure standards: The normal high pressure should be 1.3-1.7 MPa or 13-17 kg/cm², and the normal low pressure should be 0.15-0.25 MPa or 1.5-2.5 kg/cm². R134a is the most widely used medium-low temperature environmentally friendly refrigerant with excellent comprehensive performance. It is a highly effective and safe substitute for dichlorodifluoromethane and can be used in most applications where dichlorodifluoromethane refrigerant was previously used. A refrigerant pressure gauge, also known as a refrigerant meter or Freon gauge, is used to measure the current pressure in a refrigeration system. It is primarily used to detect the pressure values of the refrigerant at different stages of the system, allowing users to monitor the operational status of the equipment. The outermost scale on the low-pressure gauge represents MPa. For example, if the needle points to "3," the current pressure is 0.3 MPa. The second scale from the outside on the low-pressure gauge represents kg/cm². The red numbers on the innermost scale of the high-pressure gauge represent bar. For example, if the needle points to "20," the current pressure is 20 bar. The conversion formulas for different pressure units are: 1 MPa ≈ 101 kg/cm² ≈ 10 bar ≈ 145 Psi. Measuring the high and low pressures of an automotive air conditioning system: The engine should be idling, and the measurement should be based on an ambient temperature of 35°C. If the low pressure is higher or lower than this range, it indicates improper adjustment of the expansion valve or a problem with the compressor. When the engine throttle is increased, the measured low pressure should decrease with the engine speed. The faster the speed, the quicker the pressure drop, indicating good compressor performance; otherwise, it suggests a compressor fault. Automotive air conditioning refrigerant, commonly known as Freon, is also referred to as "snow seed" or "refrigerant" in the market. It is categorized into environmentally friendly (R134a) and non-environmentally friendly (mainly F12) types. Generally, automotive air conditioning systems do not require refrigerant replenishment for 3-5 years. However, if the cooling effect becomes poor, refrigerant may need to be added. After the air conditioning switch is turned on normally for a while, if the air blowing on your body feels cool and the set temperature is quickly reached, and the outdoor compressor can temporarily stop working like a refrigerator, it indicates normal operation. Otherwise, refrigerant may be needed. Using a thermometer to measure the temperature difference between the inlet and outlet of the indoor unit, if the difference is above 8°C, it indicates normal operation. The larger the temperature difference, the better the air conditioner's performance, with an ideal difference of around 15°C. If the difference is below 8°C, refrigerant may need to be added.

10

2

Share

Is it allowed to make a U-turn at an intersection?

How to Deal with Water Under Car Floor Mats?

What is the engine model of the 2021 BJ40 diesel version?

What is the fuel tank capacity of the CRV?

What to Do When the Wuling Rongguang's Battery is Dead and the Car Won't Start?

What to Do If Your Car Is Repossessed Due to Loan Default?

What is the working pressure of automotive air conditioning R134a refrigerant?

Which has more power, 1.3T or 1.6L?

What are the differences between Euro 5 and China 6 vehicle emission standards?

What causes the inability to shift gears in the Changan BenBen IMT automatic transmission?

How many seats does the Kia KX7 have?