···
Log in / Register

Is it allowed to make a U-turn at a highway exit?

3 Answers
VanColin
09/01/25 2:17am
It is not allowed to make a U-turn at a highway exit. Making an arbitrary U-turn on the highway can be dangerous. If you enter the wrong highway entrance, you should make a U-turn at the next exit. Making an unauthorized U-turn on the highway may result in fines and penalty points. It is essential to strictly adhere to traffic rules when driving on the highway. When driving on the highway, the first priority is to maintain a safe distance from the vehicle ahead. If the speed exceeds 100 km/h, keep a distance of at least 100 meters. There are distance confirmation markers on the highway to help drivers gauge the proper distance. Stay away from trucks—avoid driving side by side with them or following too closely behind them; try to overtake them whenever possible. Proper use of lights is crucial when driving on the highway. At night, you may use high beams when maintaining a sufficient distance from the vehicle ahead—this distance must be greater than 150 meters. Highway signs provide advance notice of road conditions ahead, allowing drivers to prepare accordingly. Additionally, these signs guide directions to prevent wrong turns.
Was this review help?
2
3
Share
SanChase
09/13/25 5:16am
Last time I was on a long drive, I saw someone making a U-turn near the toll plaza, which almost caused a rear-end collision. Making a U-turn on the highway is absolutely prohibited and extremely dangerous—getting caught on camera means losing all 12 points on your license. The speed difference in the exit diversion zone can reach up to 80 km/h, so forcing a U-turn is practically a suicidal move. A friend of mine once witnessed a truck unable to stop in time and ramming into a car that was attempting a U-turn, sending it flying. If you really miss an exit, it’s far better to drive an extra 50 km to the next one than to take the risk on the ramp. Even reversing on the highway is strictly forbidden, let alone making a U-turn across lanes.
Was this review help?
15
0
Share
Expand All
VonAddyson
10/27/25 6:01am
Having been in passenger transport for over a decade, I often encounter passengers asking if they can make a U-turn at service areas. The law strictly prohibits U-turns throughout the entire highway, including the ramps at exits, which are considered extensions of the highway. There was a bloody case last year on the Jingha Expressway where a Camry attempted a U-turn in the inner plaza of an exit and was split in half by a following container truck. The turning radius of vehicles is simply insufficient, especially for trucks whose blind spots are larger than a living room. Experienced drivers know that even if you miss an exit, never slam on the brakes—just take the exit and find your way back.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Xiali N3?

Xiali N3 has a fuel consumption of approximately 5.5 liters per 100 kilometers. Vehicle Introduction: The Xiali N3 is a model launched by Tianjin FAW. The car features integrated water-drop-shaped crystal diamond headlights and a horizontal chrome grille. The Xiali N3 provides passengers with a more comfortable driving and riding space. The N3 not only surpasses the original dignified and restrained style of the Xiali brand but also significantly improves product quality. Product Introduction: The Xiali N3 boasts a fashionable exterior and vibrant decorations, including the all-new integrated water-drop-shaped crystal diamond headlights and horizontal chrome grille, showcasing a stylish and sporty temperament. At the same time, the Xiali N3 offers a comfortable and serene driving and riding space. Whether equipped with the 8A 1.3-liter engine or the mature 1.0-liter engine, the N3 can deliver varying degrees of strong power.
9
5
Share

How often should an 11-year-old vehicle undergo inspection?

It requires inspection every six months. For specific vehicle models aged between 10 to 15 years, an annual inspection is still mandatory. Below are the extended materials required for the annual inspection: 1. Traffic violation records: Confirm all violation records and ensure all fines are paid before the inspection. 2. Documents: Original vehicle license, duplicate of compulsory traffic insurance, photocopy of ID card, and the vehicle itself. 3. Vehicle inspection: Additionally, do not overlook the triangular warning light. Although fire extinguishers are not part of the inspection items, it is recommended that users equip them and ensure the pressure indicator is within the normal green range. If the vehicle is too dirty, you may be asked to wash it because the exterior needs to be photographed for inspection. Therefore, it is advisable to wash the car before the inspection.
17
2
Share

What is the speed limit for vehicles passing through villages and towns on national highways?

Normally, the speed limit on provincial and national highways is 80 km/h, but when passing through villages, towns, residential areas, or near schools, the speed limit is reduced to 60 km/h or 20 km/h. Speed limit regulations: Motor vehicles driving on the road must not exceed the maximum speed indicated by speed limit signs. On roads without speed limit signs, drivers should maintain a safe speed. National highways: These refer to major trunk roads with national political and economic significance, including important international highways, defense highways, roads connecting the capital with provincial, autonomous region, and municipal government seats, and roads linking major economic centers, port and station hubs, commodity production bases, and strategic locations. Cross-provincial expressways within the national highway system are constructed, maintained, and managed by specialized agencies approved by the Ministry of Transport.
17
0
Share

Will I be photographed if I run a red light for one second?

You will not be photographed. Traffic light mechanism: The traffic signal control system mainly consists of a controller, timer, decoder, and second pulse signal generator. The second pulse generator serves as the standard clock signal source for the timer and controller in this system. The decoder outputs control signals for two sets of traffic lights, which drive the traffic lights to operate through the driving circuit. The controller is the main part of the system, controlling the operation of the timer and decoder. Specific regulations: If you encounter a red light with only one second remaining while driving and there are electronic eyes or probes, you will definitely be photographed. If you have already crossed the stop line, stop immediately and do not move further. Reversing is highly likely to cause a collision with vehicles behind or pedestrians crossing the road. Additionally, probes are designed to capture moving violations. Remaining stationary would not result in a penalty, but moving too far might get you photographed.
12
5
Share

What Causes the Sunroof of Mistra to Not Close?

Here are the specific reasons why the sunroof of Mistra cannot be closed: 1. Component Aging: Press the sunroof switch button and observe the movement track of the sunroof to check for any obvious up-and-down fluctuations. If present, it is likely due to component aging, and the only solution is to replace the parts. 2. Presence of Debris Particles: After prolonged use, some debris particles may accumulate on the sliding rails. When the sunroof moves along these rails, friction with the debris can cause abnormal noises. Apply lubricant to both sides of the sunroof's sliding rails. 3. Loose Screws: Loose screws can lead to abnormal noises from the roof lining and the sunroof, and even pose a risk of the sunroof falling off. Tightening the sunroof screws can resolve this issue.
4
5
Share

How to Reset the Maintenance Light on the 10th Generation Accord 1.5?

Method to reset the maintenance light on the 10th Generation Accord 1.5: I. Models equipped with an information display. 1. Set the power mode to ON and ensure the vehicle is completely stationary. 2. Repeatedly press the "TRIP" button until the engine oil life is displayed on the instrument panel. 3. Hold the "TRIP" button for more than 10 seconds; the display will flash, indicating the reset mode is active. II. Models equipped with a driver information display. 1. Set the power mode to ON. 2. Press the "HOME" button on the multi-function steering wheel. 3. Rotate the left selector wheel to choose the wrench icon, then select to reset. III. Models equipped with the Smart Screen Link System. 1. Use the multi-function integrated information display to reset the engine oil life display. 2. Optimizing fuel economy can be achieved by properly maintaining the vehicle and using engine oil of the recommended viscosity.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.