Is it allowed to drive without a license plate?

Will the passenger seat be penalized for not wearing a seat belt in 2021?

For non-commercial vehicles, if the passenger seat occupant is caught not wearing a seat belt, a fine will be imposed but no penalty points will be deducted. For commercial vehicles such as taxis, in some pilot cities, penalty points will be deducted if the passenger seat occupant does not wear a seat belt. Below are the performance and structural components of car seat belts: Performance of car seat belts: Seat belt design elements: The seat belt should be designed to meet the requirements of occupant protection performance, seat belt usage reminders, comfort, and convenience. The design measures to achieve these aspects include the selection of the seat belt adjuster position, seat belt specifications, and the use of auxiliary devices. Structural components of car seat belts: Seat belts are composed of webbing retractors, buckle guides, height adjustment mechanisms, pre-tensioners, and locking devices.

5

Share

What does a bracket with an exclamation mark indicate as a fault?

Red exclamation mark (specifically a circle with an exclamation mark inside a bracket) represents a warning for the braking system, mainly indicating a braking system malfunction or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark indicating a braking system fault, other exclamation marks on a car are yellow, representing general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a general performance or component and function fault in the car. Main issues include parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant being below the normal range. Transmission oil should be replaced promptly. Abnormal Tire Pressure: A horizontal line under a bracket with an exclamation mark in the middle. This represents the tire pressure monitoring warning light. When the tire pressure of the car is too low, this warning light will illuminate. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in one of the car lights. Solution: Visit a 4S shop as soon as possible for inspection and repair. Alternatively, you can check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem.

18

2

Share

Where is the sunroof drain hole located on the Nissan Sylphy?

The sunroof drain outlet of the Nissan Sylphy is located inside the windshield drainage area. The sunroof drain serves as an exit point for rainwater to drain accumulated water from the vehicle to the outside. While its principle and structure are quite simple, it is often overlooked in practice. Failure to clean it promptly can eventually lead to water leakage inside the car, and in severe cases, may cause irreversible damage to the vehicle's mechanical components and electronic devices. Maintenance methods for the sunroof drain: 1. Keep it clean: Regularly remove debris and dust during routine car washes. Remember not to spray water directly at the drain hole when washing the car. 2. Avoid prolonged sun exposure: Whenever possible, park the car in a shaded area to prevent rubber parts from aging and gaps from widening due to direct sunlight.

18

5

Share

Does damage to the beam head count as damage to the main frame?

It depends on the extent of the collision damage and the quality of the repairs after maintenance. If the damage is only to the front of the main frame and does not affect the shock absorber area, the impact is not significant. However, if the damage is severe and the repair quality is poor, the situation becomes uncertain. Here are some key points to note: 1. A car with damage to the beam head should not be driven further. Repairing the beam head classifies the car as an accident vehicle, specifically a major accident vehicle. The overall structure becomes unstable, posing significant danger. 2. The longitudinal beams absorb collision energy through crushing and bending deformation. The front longitudinal beam alone bears 60% of the total collision energy, while the rear longitudinal beam, though under less pressure than the front, still plays a major role in absorbing energy during rear-end collisions. Therefore, if the front or rear longitudinal beams are damaged in an accident, their protective role for the passenger compartment during future driving will be greatly diminished.

7

0

Share

Where is the hood switch located on the Bestune X40?

The hood switch of the Bestune X40 is located on the left side of the driver's leg space, at the lower part of the driver's side A-pillar. Below are detailed explanations about the hood: 1. The function of the hood is to guide airflow. For objects moving at high speed in the air, the airflow generates air resistance and turbulence around the moving object, which directly affects its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through airflow guidance, air resistance can be decomposed into beneficial forces, increasing the grounding force of the front tires, which helps stabilize the car's movement. The streamlined appearance of the hood is essentially designed based on this principle. 2. Under the hood are crucial components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system, all of which are vital to the vehicle. Enhancing the strength and structure of the hood can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. The exterior design of a vehicle is a direct reflection of its value. As an essential part of the overall appearance, the hood plays a critical role, aesthetically embodying the concept of the entire car. 4. During driving, the driver's forward visibility and natural light reflection are crucial for correctly judging road conditions and situations ahead. The shape of the hood can effectively adjust the direction and form of reflected light, reducing the impact of light on the driver. 5. The engine operates in a high-temperature, high-pressure, and flammable environment. Accidents such as explosions, fires, or leaks may occur due to overheating or unexpected component failures. The hood can effectively block damage caused by explosions, acting as a protective shield to isolate air and prevent the spread of flames, thereby reducing the risk and extent of fire damage.

5

4

Share

Can Dual Exhaust Modification Be Registered?

Converting a single exhaust to a dual exhaust is illegal and cannot be registered. Below are the relevant requirements for vehicle modifications: 1. The vehicle management office shall make a decision to approve or deny the modification within one day of accepting the application. If approved, the vehicle owner must submit the modified vehicle for inspection at the vehicle management office within ten days. The office will verify the vehicle within one day, reclaim the original license, and issue a new one. For modifications involving the replacement of the body or frame, the office must also verify the vehicle identification number (VIN) imprint and retain documentation proving the origin of the new body or frame. 2. Registered vehicles must apply for modification registration with the local vehicle management office in the following cases: changing the vehicle's color; replacing the engine; replacing the body or frame; or replacing the entire vehicle due to quality issues.

14

0

Share

Is it allowed to drive without a license plate?

Will the passenger seat be penalized for not wearing a seat belt in 2021?

What does a bracket with an exclamation mark indicate as a fault?

Where is the sunroof drain hole located on the Nissan Sylphy?

Does damage to the beam head count as damage to the main frame?

Where is the hood switch located on the Bestune X40?

Can Dual Exhaust Modification Be Registered?

Can Antifreeze Be Used in Summer?

Can the clock in the center of the Porsche dashboard be retrofitted?

What is the Volkswagen Phaeton?

What are the differences between the Mercedes-Benz A200 and A200L?