Is it allowed to drive barefoot?

1 Answers
DiTessa
07/28/25 5:49pm
Driving barefoot is not explicitly prohibited. Motor vehicle drivers must comply with the following regulations: 1. Documents: Carry relevant traffic management documents such as driver's license and vehicle registration certificate when driving. 2. Lending: Do not lend, alter, or forge traffic management documents such as driver's license and vehicle registration certificate, and do not use any invalid traffic management-related documents. 3. Vehicles: Do not drive vehicles that do not match the vehicle type specified in the driver's license, vehicles without fire extinguishers, vehicles with non-compliant safety equipment or malfunctioning components, vehicles that do not meet loading regulations, or vehicles with incomplete license plates or illegible license plate characters.
Was this review help?
3
0
Share
More Forum Discussions

Can the fuel filter be left unchanged?

Fuel filters need to be replaced if they are damaged or excessively dirty. The primary function of a fuel filter is to remove impurities from gasoline. Failure to replace the fuel filter can lead to clogged fuel lines, poor combustion, resulting in excessive carbon buildup, reduced vehicle power, abnormal shaking, and ultimately, the car failing to start or suddenly stalling while driving. Below are symptoms of a faulty fuel filter: 1. Frequent stalling - When the fuel filter is clogged, gasoline delivery is compromised, causing insufficient fuel supply to the engine. This results in noticeable jerking during driving or gear shifts and makes the engine prone to stalling at idle. 2. Reduced driving power - Due to restricted fuel flow, the engine's power output decreases, leading to weak acceleration and reduced vehicle speed. 3. Engine shaking at idle - Moderate clogging of the fuel filter may not significantly affect driving power but can cause the engine to shake when the car is idling.
8
2
Share

What Causes the Engine Malfunction Light to Illuminate?

There are primarily 7 reasons for the engine malfunction light to illuminate: Sensor failure: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which triggers the engine malfunction light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and lead to the malfunction light illuminating. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockages can all cause poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If the vehicle's intake system has problems, it may lead to engine pipeline blockages, and in severe cases, cause the engine malfunction light to illuminate. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust system failures can also cause the engine malfunction light to illuminate. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or engine fuel supply system failures can easily cause catalytic converter issues. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and cause the malfunction light to illuminate. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally and whether there are issues such as shaking or black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the "on" position without pressing the clutch. The vehicle will perform a self-check after powering on. Wait 5-10 seconds and observe whether the malfunction light on the dashboard turns off. If the malfunction light remains on, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.
9
4
Share

What car starts with the character 'Song'?

The car that starts with the character 'Song' is from the BYD brand, and the model is named Song. Below are some relevant details about this car: 1. The body dimensions are 4600*1830*1700, with a wheelbase of 2600mm, making it a compact SUV. It offers reasonable driving and passenger space, ample expansion space, and a trunk with a maximum depth of 1.86 meters that is mostly flat, providing high practicality. 2. The powertrain features a 1.5T direct-injection turbocharged engine, with a maximum power output of 113kw and a peak torque of 240 Nm. It is paired with either a 6-speed manual or a 6-speed wet dual-clutch transmission, delivering performance and fuel efficiency at the top level for its class and price range. Safety configurations include standard ESP (Electronic Stability Program), a front MacPherson strut suspension, and a rear multi-link independent suspension, ensuring a qualified safety level and comfortable driving experience.
9
0
Share

What is the method to reset the maintenance light on the Haval H6?

The method to reset the maintenance light on the Haval H6 is as follows: 1. Turn on the ignition switch to power the car, ensuring the engine remains off; 2. Press the reset button once, and the display will show the reset system; 3. Each press of the reset button will switch to the next reset system; 4. Select the maintenance reset system and hold the reset button for about 3 seconds; 5. When the relevant icon appears on the instrument display, it indicates that the maintenance reset was successful. The Haval H6 is the flagship model of the Haval brand, with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, a wheelbase of 2680mm, a maximum torque of 285Nm, a maximum horsepower of 169ps, and a maximum power of 124kw. The Haval H6's dashboard features a horizontally integrated design with a dynamically aesthetic overall surface, naturally creating a concave space. The fluid-textured comfortable cabin provides a relaxed and pressure-free quality space, offering a stylish driving experience. Additionally, the new Carolin Red color scheme, complemented by diamond embossing technology, brings a new visual enjoyment.
9
3
Share

Which is on and which is off?

on means on, and off means off. In addition, there are some other buttons on the car: 1. The "SEL" button is the menu selection confirmation button, usually located on the multifunction steering wheel; 2. The "AC" button is the compressor switch, which is the air conditioning cooling switch; 3. "MUTE" is the mute button, which can mute the sound with one click; 4. "MODE" is the mode switching button; 5. "SET" on the multifunction steering wheel is the cruise control function button; 6. The button with an OFF under a circled A is the auto start-stop function switch, which can be pressed to turn the engine auto start-stop function on or off.
16
1
Share

Should You Shift to N or P Gear When Waiting at a Red Light?

When waiting at a red light, shift to N gear. The N gear is the neutral gear, where the engine and transmission of the car are not connected and are in a disconnected state. This gear is used for temporary stops (such as at a red light). To prevent the vehicle from rolling on a slope, you must keep your foot on the brake. Generally, automatic transmission vehicles also have P, D, R, S, and L gears. P stands for Parking gear; D stands for Drive gear; R stands for Reverse gear; S stands for Sport gear; and L stands for Low gear. An automatic transmission does not require shifting gears while driving, and its advantage over a manual transmission is that it is easier to drive. Automatic transmissions also include continuously variable transmissions (CVT), electronic paddle shifters, and electronic gear shift levers. Vehicles on the market come with three types of transmissions: manual transmissions, automatic transmissions, and semi-automatic transmissions.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.