Is it allowed to be late for the Subject 3 driving test?

What engine does the Zhonghua H330 use?

The engine of the Zhonghua H330 is independently developed by Brilliance Auto and manufactured by the Shenyang E2 Engine Plant. The engine model of the Zhonghua H330 is JL478QEE, with a maximum power of 77 kW, a maximum torque of 143 Nm, a maximum horsepower of 105 Ps, a maximum power speed of 5800 rpm, and a maximum torque speed range of 3800-4200 rpm. For daily maintenance of the Zhonghua H330 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.

2

5

Share

Should the Money Be Paid Before or After the Transfer of Ownership for a Used Car?

For used cars, it is common practice to pay the money first before completing the transfer of ownership. The payment is made to the used car dealer, and the money is temporarily held by them until the transfer is finalized. It is advisable to avoid transactions with unfamiliar private sellers, as such deals tend to be less secure for both parties. Once the transfer is complete, the payment is then handed over to the original owner. Below is an extended explanation: Introduction to the Vehicle License: The vehicle license serves as the car's ID card, recording details such as the engine number, chassis number, owner's name, emission information, and inspection records. Please note again that this document pertains to the vehicle itself, as the license plate number changes after the transfer of ownership. Since the car changes hands, the vehicle license must be updated, and the old one becomes invalid. Therefore, the new owner must obtain the updated vehicle license.

9

5

Share

What is the difference between waxing and not waxing after a few years?

Waxed cars appear cleaner than unwaxed ones and visually give the impression of being new. Below is an introduction to the advantages of waxing: Easier car washing: Even with a small amount of car wash soap, dirt can be easily removed. This is because waxing makes the paint surface smooth, and the dirt on it is easier to remove, making regular car washing more effortless. Protection against minor scratches: Wax forms a thin film on the car, protecting it from scratches. While driving, stones and scratches can fly around the door handles. By enveloping the car in a film (coating), it can be protected from scratches. Preventing water stains from rain: Due to the high temperature of the hood, rainwater only evaporates, leaving behind air stains contained in the rainwater. Waxing can completely prevent stains left by rainwater.

6

3

Share

What are the mandatory insurances for vehicles?

Vehicles must purchase the following insurances: Compulsory Traffic Insurance: This is a mandatory insurance stipulated by the state. If not purchased, traffic police can impose fines upon inspection. This insurance offers limited compensation, mainly covering others and not the policyholder's own vehicle. Third-party Liability Insurance: In the event of an accident causing injury, death, or direct property damage to individuals other than the driver and passengers, the insurance company will provide compensation according to regulations. If the other party is fully at fault, the insurance company can offer full compensation. If the policyholder is fully at fault, the insurance company has a 20% deductible. Vehicle Damage Insurance: This insurance compensates the policyholder for their own vehicle damages. It is particularly useful for new drivers who may experience minor scrapes and scratches, helping to reduce personal losses.

13

0

Share

What are the effects of removing the catalytic converter from a car?

Removing the catalytic converter primarily has three major effects, as outlined below: Increased vehicle emissions: Without the catalytic converter, the exhaust gases cannot be effectively purified, leading to emissions that exceed regulatory standards. Reduced vehicle performance: Removing the catalytic converter can increase fuel consumption, thereby diminishing the car's power. Failed vehicle inspections: Since the catalytic converter's removal results in non-compliant emissions, the vehicle is likely to fail annual inspections. Below is a brief introduction to the catalytic converter: The catalytic converter is named 'three-way' because it simultaneously converts three major harmful substances in exhaust gases into harmless compounds. Its working principle involves enhancing the activity of CO, HC, and NOx gases as high-temperature exhaust passes through the purification device. This promotes specific oxidation-reduction chemical reactions: CO oxidizes into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds oxidize into water and carbon dioxide; and NOx is reduced into nitrogen and oxygen. These three harmful gases are transformed into harmless ones, thereby purifying the vehicle's exhaust.

9

5

Share

What is the standard tire pressure for the Highlander?

The normal tire pressure range for the Highlander is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. Some Highlander models are equipped with a tire pressure display function. By selecting the menu on the steering wheel, navigating to the instant fuel consumption display, and pressing the directional key downward, the tire pressure will be shown. The tire pressure monitoring system is a type of active safety device that can alert the driver in time when there are signs of danger in the tires, prompting them to take appropriate measures to avoid serious accidents. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, lowering driving comfort; accelerates wear on the central tread pattern, reducing tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases the friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies the friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure. Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to come on. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor. The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.

3

4

Share

Is it allowed to be late for the Subject 3 driving test?

What engine does the Zhonghua H330 use?

Should the Money Be Paid Before or After the Transfer of Ownership for a Used Car?

What is the difference between waxing and not waxing after a few years?

What are the mandatory insurances for vehicles?

What are the effects of removing the catalytic converter from a car?

What is the standard tire pressure for the Highlander?

Can a ride-hailing driver's license be transferred to another location?

What are the test items for automatic transmission vehicles?

How Many Days of Practice Are Needed for Subject 3 Driving Test?

Can Car Air Conditioning Filters Be Cleaned and Reused?