Is it against the rules to remove the rear seats of a van?

1 Answers
LeAngela
08/26/25 4:34am
Removing the rear seats of a van violates regulations. Below are specific introductions to vehicle violations: 1. Changing the body color: Every vehicle must be registered with the vehicle management office. While modifications are allowed, they require registration. However, excessive changes may lead traffic police to deem the vehicle inconsistent with its actual specifications, which is also illegal. 2. Obstructed license plates: Obstructing license plates results in a 12-point penalty, and in severe cases, the vehicle may be impounded. 3. Unauthorized modifications to headlights and engines: Some owners illegally alter headlight colors, engine power, or exhaust systems, compromising driving safety. Such actions incur a 12-point penalty and fines.
Was this review help?
5
2
Share
More Forum Discussions

What engine is used in the 2014 Volvo V60?

The 2014 Volvo V60 is equipped with a 2.0T inline 4-cylinder turbocharged engine, model B5204T9, with a maximum horsepower of 197ps, maximum torque of 300nm, and maximum power of 145kw. The 2014 Volvo engine is imported and manufactured in Sweden. For the 2014 Volvo engine, the following maintenance methods can be used daily: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil volume moderate; When oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and bring dirt back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
8
0
Share

What Brand is SERES?

SERES is a brand specializing in the production of new energy vehicles. Below is relevant information about SERES: 1. Brand Overview: SERES is a brand under Chongqing Jinkang SERES Automobile Co., Ltd., affiliated with Chongqing Sokon Industrial Group Co., Ltd. It focuses on the field of new energy electric vehicles, creating 'car-follows-heart' new electric vehicles for users. 2. Technology: With original R&D in electric drive systems and vehicle control, Jinkang SERES possesses software and hardware technologies from algorithms to engineering development, with over 1,000 applied and granted Sino-US technology patents, supporting the R&D of SF5 in core electric drive technologies and new electric technologies based on electric drive.
12
2
Share

How much fuel does a 1.5T engine consume when idling with AC on for one hour?

Idling with AC on for 1.5 hours consumes approximately 1.5L of fuel, which is not significant in terms of fuel consumption. However, it is detrimental to the engine as it can lead to carbon buildup and overheating damage to the catalytic converter. When adjusting idle speed, avoid sudden increases or decreases in RPM to prevent premature engine wear. Below is additional information: 1. Definition of Idle: Idle refers to the operation of the engine under no load, where it only needs to overcome internal friction resistance without outputting power. The minimum RPM required to maintain stable engine operation is called idle speed, which is one of the five basic operating conditions of an engine. 2. Idle Driving: When the car is in gear without pressing the accelerator pedal or when the accelerator pedal is released during driving, maintaining the minimum throttle opening with the engine RPM matching the parking idle speed is referred to as driving idle.
6
2
Share

What is Volkswagen's Four-Wheel Drive Called?

Volkswagen's four-wheel drive systems are mainly divided into two types: 4Motion and 4xMotion. Below are the differences between the two: 1. 4xMotion uses an electronically controlled differential, while the latter uses a mechanical one; 2. Compared to the 4xMotion system, the 4Motion system enhances road driving capability; 3. The climbing ability of 4Motion is 31 degrees, while the TDI version of 4xMotion has a climbing ability of 45 degrees. Here are the advantages of four-wheel drive: 1. Since all-wheel-drive vehicles can utilize the full weight of the car as adhesion pressure, the adhesion is significantly increased, thereby extending the traction limit; 2. The engine's power can be distributed to each wheel, reducing the driving force burden on each wheel. This ensures that sufficient power is transmitted to the road without exceeding the tire friction limit (preventing wheel slip), giving the car strong off-road capability; 3. Tire wear is uniform, which helps extend the service life of the tires.
3
5
Share

Can the trunk partition of the BMW X3 be removed?

To remove the trunk partition of the BMW X3, you can simply detach it directly as it is secured with clips. Just unfasten the clips to take it off. Here are some details about the BMW X3: 1. Exterior: The design is fresh and youthful. The updates on the new X3 mainly focus on the front and rear, featuring a new style of headlight assembly and redesigned fog light structure. The BMW X3 boasts a dynamic appearance, combining versatility and practicality, making it an ideal vehicle for all road conditions. 2. Powertrain: The BMW X3 is equipped with the classic 2.0T turbocharged engine, paired with an 8-speed automatic transmission. This powertrain system is widely used across BMW models, known for its exceptional stability and durability. It delivers robust power output, achieving a 0-100 km/h acceleration time of under 6.8 seconds.
9
3
Share

Transmission Failure: Repair or Replace?

If only the internal gears are damaged, they can be repaired. However, if the control mechanism is damaged, it is recommended to replace the entire transmission directly. Below are specific introductions to different types of transmissions: 1. CVT: CVT is a continuously variable transmission. Its advantages include fuel efficiency, affordable repairs, and smooth operation, but it has weaker acceleration push-back sensation and limited torque handling capacity for high-torque engines. 2. AT: AT is an automatic transmission. Its advantages lie in ease of operation and relaxed driving, as the automatic transmission selects the most suitable gear based on vehicle speed and feedback from the onboard computer. However, it has higher repair costs and fuel consumption. 3. DCT/DSG: Both DCT and DSG are dual-clutch transmissions. They offer fast gear shifting, high efficiency, and low fuel consumption. However, they require high manufacturing precision, resulting in higher costs, and provide relatively poorer comfort.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.