···
Log in / Register

Is it advisable to change the test center after failing Subject 2 twice?

3 Answers
AdelynAnn
07/25/25 6:40am
After failing Subject 2 twice, it is generally not recommended to change the test center if you have the option. Although you have failed twice at the same test center, this also means you are more familiar with it compared to others. With more practice, you might pass on your third attempt. Therefore, changing the test center at this stage is not a wise decision. Below is an introduction to Subject 2: 1. Reverse Parking: This assesses the driver's ability to maneuver the car in a real-world scenario. It involves correctly reversing the vehicle into a parking space from both sides while in motion. 2. Parallel Parking: Parallel parking is becoming increasingly common in urban areas, especially where parking spaces are limited. Many streets have converted sides into "parallel parking spots." 3. Hill Start and Stop: This is a key assessment point in Subject 2. It requires the driver to stop the vehicle at a fixed point on a slope with a 10% gradient and a 30-meter length, testing coordination between steering, braking, and clutch control. 4. Right-Angle Turn: This evaluates the driver's ability to correctly steer the vehicle through sharp turns, accurately judging the difference between the vehicle and the outer wheel. 5. Curve Driving: Also known as the S-turn, this test requires the vehicle to navigate a specified S-shaped road width without touching the edge lines, demonstrating smooth and controlled steering.
Was this review help?
15
1
Share
LaFinn
08/11/25 1:10pm
When I was learning to drive, I also failed the subject two test twice. At that time, I was really anxious and wanted to try a different test center for a new environment. But my instructor reminded me that the layouts of test centers are actually quite similar, and the key lies in my own technical proficiency. Later, I persisted in practicing more at the original training ground, focusing on my weak points, such as reversing into a parking space and stopping at a fixed point on a slope. After each practice session, I reviewed my mistakes, and as a result, I passed on the third attempt. Changing test centers might waste time and energy in getting familiar with new routes, so it's better to focus on intensive training and psychological adjustment. I suggest finding an experienced friend or instructor to accompany you for practice, simulating test scenarios to reduce anxiety, which makes success more achievable.
Was this review help?
2
0
Share
Expand All
Clay
09/27/25 5:34am
I failed the subject two driving test twice in a row, which really shook my confidence. I almost considered changing test centers. But upon reflection, the main reasons for failure were insufficient practice and neglecting details, like not aligning the car properly during parallel parking. Later, I practiced for two hours daily at the driving school's training ground, recorded my operations, and made gradual improvements based on the exam criteria. After persisting for a week, I passed easily at the same test center. Switching test centers might seem like a way to relieve pressure, but unfamiliar environments can lead to more mistakes. It's better to focus on improving skills first, exchange experiences with other trainees, and ensure solid foundational skills before taking on the challenge again.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Open the Front Hood of the Lavida?

To open the front hood of the Lavida: 1. Press the front hood release button located on the left side of the driver's seat; 2. Lift the front hood and secure it with the support rod. Taking the 2021 Lavida as an example, it is a compact car with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, a wheelbase of 2688mm, and a curb weight of 1318kg. The 2021 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension, equipped with a 1.4T turbocharged engine delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power output of 110kW.
16
0
Share

What are the main causes of brake system failure?

Brake system failure is mainly caused by: 1. Loose connection between the brake pedal and the master cylinder; 2. No fluid or severe lack of fluid in the brake fluid reservoir; 3. Brake pipeline fracture and oil leakage; 4. Rupture of the master cylinder piston cup. The functions of the brake system are: 1. To ensure the car decelerates and stops as required by the driver; 2. To ensure reliable parking of the vehicle; 3. To protect the safety of the car and the driver. The composition of the automobile brake system: 1. Energy supply device, including various components that supply and regulate the energy required for braking and improve the state of the transmission medium; 2. Control device, components that generate braking action and control braking effect; 3. Transmission device, including various components that transmit braking energy to the brake, such as the master cylinder and wheel cylinder; 4. Brake, components that generate resistance to the movement or movement trend of the vehicle.
18
1
Share

What is the installation method for the Baojun 560 armrest box cover?

Baojun 560 armrest box cover installation method is: 1. Plug in the connector; 2. The central panel is surrounded by clips, fasten them in sequence; 3. Secure the clip at the junction of the storage box panel and the armrest box; 4. Shift the gear to N position, then hold the gear lever and push it inward for installation; 5. Tighten the fixing screws; 6. Cover the central armrest box with the fabric cover plate. Taking the 2017 Baojun 560 as an example, it is a compact SUV with body dimensions of: length 4670mm, width 1810mm, height 1755mm, and a wheelbase of 2750mm.
20
3
Share

How Long Does the Battery in ETC Last?

Generally, the battery in an ETC device can last for about 3 years under normal conditions. For solar-powered ETC devices that are not frequently used, it is recommended to charge them every 3 months to prevent natural discharge of the internal battery. ETC devices have an internal battery and are charged externally via solar power, so they do not require regular charging. ETC stands for Electronic Toll Collection, which is an electronic toll system. To apply for an ETC device, you need to provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, a valid ID of the agent is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required, and the applicant must be between 18 and 60 years old and own the vehicle. How ETC works: The system uses an onboard electronic tag installed on the vehicle's windshield to communicate with microwave antennas in ETC lanes at toll stations. Through computer networking technology, the system performs backend settlements with banks, allowing vehicles to pass through highway or bridge toll stations without stopping to pay the toll. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping; Cost-saving: Reduces vehicle wear and fuel consumption by minimizing frequent starts and stops; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more advanced, faster, and more high-tech. Compared to license plate payment systems, ETC technology is more mature and advantageous.
17
0
Share

Where is the tow hook located on the Baojun 730?

Because the country currently does not allow private vehicles to tow, the Baojun 730 only has a front tow hook and no rear tow hook. The front tow hook is located on the left or right side of the front bumper. You can install it by removing a small cover. The Baojun 730 is equipped with a 1.5L turbocharged engine. Since the engine power is not very strong, towing will make it even less sufficient. Therefore, it is also advisable to avoid installing a rear tow hook for towing. In case of emergencies, it is better to call a professional towing service. Owners with built-in rear tow hooks should also try to avoid towing casually until they know the maximum weight their vehicle can tow. Towing overweight vehicles or cargo may damage the car. Some cars have detachable tow hooks that need to be assembled before use. After removing the cover on the bumper, you can assemble the hook that comes with the vehicle.
16
1
Share

How Long Will a Car Be Scrapped Due to Burning Engine Oil?

Burning engine oil will not cause a car to be scrapped, but it can lead to rapid damage to the engine and oxygen sensors. The reasons for a car burning engine oil are: 1. Faulty design in the crankcase forced ventilation system; 2. Mesh patterns on the cylinder walls. The hazards of burning engine oil include: generating a large amount of carbon deposits and gum, causing the engine to consume more fuel and lose power, possibly leading to difficulty in starting the engine and severe engine wear. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent contamination from external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine parts; 4. To buffer the pressure rise at the engine cylinder ports; 5. To flush away dirt generated on the working surfaces of parts.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.