Is It Advisable to Buy a Car That Has Been Submerged to the Carpet Level?

1 Answers
HadleyDella
07/29/25 4:47pm
It is not recommended to purchase a car that has been submerged to the carpet level, as it may have hidden issues. Relevant information is as follows: 1. Car Flooding Insurance: If a car is submerged while stationary, the engine is generally not damaged, and you can claim compensation as long as you have purchased auto damage insurance. However, if you attempt to start the car and drive it out of the flooded area, causing engine damage, even if you have purchased flood insurance, the insurance will not cover the cost. 2. Reasons Not to Buy: There are many wires under the car that need to be inspected and treated after being submerged. Additionally, the carpet needs to be cleaned after being soaked, otherwise it may develop mold or odors.
Was this review help?
3
0
Share
More Forum Discussions

What is the process of recharging Freon in a vehicle's air conditioning system?

The process of recharging Freon in a vehicle's air conditioning system is: 1. Evacuate the system by closing the manual valves on the pressure gauge and the high/low pressure manual valves; 2. Connect one end of the hose to the injection valve fitting of the Freon canister; 3. Open the refrigerant canister, loosen the nut on the pressure gauge hose to release some gas, then close it; 4. Open the high-pressure side manual valve and invert the canister; 5. Inject the specified amount of liquid refrigerant, then close the refrigerant injection valve and the high-pressure manual valve. Vehicle air conditioning, also known as automotive air conditioning, is used to regulate and control the temperature, humidity, air cleanliness, and air flow inside the vehicle cabin to an optimal state. Its components include the refrigeration system, heating system, air purification device, and control system.
13
1
Share

Can You Turn Left on a Straight Lane When the Light is Green?

At an intersection with standard three-color traffic signals, you may turn left when the light is green, but you must yield to oncoming straight-moving vehicles first. When encountering lane signals with arrows, you cannot turn left if the straight arrow is green but the left-turn arrow is red, though you may enter the left-turn waiting area. Here is an introduction to traffic signals: When the green light is on: Vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. Pedestrians have the right of way. When the yellow light is on: Vehicles that have already crossed the stop line may continue to proceed. When the red light is on: Vehicles are prohibited from proceeding.
11
5
Share

Can a Car Start If Water Enters the Exhaust Pipe?

Can a car start if water enters the exhaust pipe? Water entering the exhaust pipe does not affect the normal operation of the engine. The functions of the exhaust pipe are: 1. To expel the exhaust gases produced by engine combustion; 2. To reduce vibration and noise, thereby extending the lifespan of the exhaust muffler system. Precautions for exhaust pipe maintenance include: 1. Avoid prolonged driving at high load in low gears, as this can damage the engine and muffler; 2. Avoid revving the engine at high speeds while stationary for extended periods; 3. Close the choke when starting the engine in cold winter conditions and open it promptly after the engine warms up; 4. Do not install windshields or decorative items in front of the engine and muffler, as they can hinder heat dissipation.
7
4
Share

What does fuel injector maintenance entail?

Fuel injectors require maintenance and servicing. Below is relevant information about fuel injectors: 1. Significance of fuel injector maintenance: Fuel injector maintenance refers to the necessary upkeep of fuel injectors, with the key focus being on achieving balanced fuel injection and preventing leaks. When maintaining or replacing fuel injectors, it is essential to conduct balance testing. Only when the fuel injection volume is evenly balanced across all cylinders can the injectors be installed in the vehicle. The optimal methods for maintaining and testing injectors involve using specialized injector test benches and ultrasonic cleaning machines. 2. Precautions for injector maintenance and replacement: Used filters should not be reused, as old filters lose their effective filtering capabilities, and the impurities trapped within them can recontaminate the injectors. Install appropriate protective caps, which are crucial components for preventing carbon buildup and extending the lifespan of the injectors. These caps serve a protective and self-cleaning function during injector operation, so they must not be omitted. Without them, the injectors can quickly become clogged with carbon deposits.
11
0
Share

How to Replace the Battery in a Mercedes-Benz CLS-Class Key?

To replace the battery in a Mercedes-Benz CLS-Class key, follow these steps: 1. Locate the button on the back of the key; 2. Press and hold the button while sliding the back cover forward to open it; 3. The battery is inside the slot, remove and replace it. The Mercedes-Benz CLS-Class is a mid-to-large-sized 4-door, 5-seater sedan with body dimensions of 4988mm in length, 1890mm in width, and 1424mm in height, with a wheelbase of 2939mm. It is equipped with a 1.5T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 280 Nm. The drive system is front-engine, rear-wheel drive, with a four-link independent front suspension and a multi-link independent rear suspension.
16
0
Share

How to Remove the Rear Seats of a Haval H6?

The method to remove the rear seats of a Haval H6 is as follows: 1. Enter the vehicle and directly pry off the plastic covers of the clip-type screws under the rear seats; 2. Remove the protective plastic covers to locate the screws; 3. Use a socket wrench to unscrew the screws, and then the seats can be taken out. The Haval H6 is a compact 5-door, 5-seat SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The Haval H6 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 Nm.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.