Is it acceptable to delay the annual vehicle inspection by one month?

3 Answers
OTravis
07/24/25 11:01pm
Vehicle annual inspections must be completed within the stipulated time frame; otherwise, fines and penalty points will be imposed. Below are the relevant details: 1. Regulations: According to Article 47, Paragraph 4 of the "Motor Vehicle Registration Regulations," driving a motor vehicle on the road without undergoing the required periodic safety technical inspection will result in 3 penalty points, a fine of 200 yuan, and possible temporary seizure of the vehicle. 2. Vehicle Annual Inspection: Vehicle annual inspection refers to the mandatory testing required for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections help promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
Was this review help?
10
0
Share
McIvan
08/10/25 10:22am
I've driven many cars and know very well how dangerous it is to delay the annual inspection, even by just one month. The inspection can detect issues with brakes, tires, or lights, and ignoring these problems if overdue could lead to serious accidents, like brake failure on the highway. A friend of mine once delayed the inspection by half a month, got fined 200 yuan, had the car impounded, and the insurance refused to cover the accident damages. Now, regulations are stricter, and in most places, being caught with an overdue inspection results in fines starting from 300 to 500 yuan, and it also affects personal credit records. I always recommend booking an inspection station in advance and setting reminder dates on car apps. If you are late, go immediately to make up for it with all the necessary documents—it might cost a bit more, but safety comes first. Regular maintenance is the foundation to avoid last-minute risks.
Was this review help?
19
0
Share
Expand All
McAdrian
09/26/25 6:45am
I've had several experiences with overdue vehicle inspections, and the consequences were significant. Legally, exceeding the deadline by one month is considered overdue, and the traffic authorities will impose daily fines or a one-time ticket of several hundred yuan. In severe cases, the vehicle may be directly towed and impounded. I still remember that when I was two weeks late for a reinspection the year before last, I was also checked for whether the vehicle's exhaust emissions complied with regulations, which added to the testing fees. The essence of vehicle inspection is to protect everyone's safety. If delayed, issues like broken lights or brake problems may go unnoticed, leading to a surge in accident rates. The reinspection process usually requires re-examining documents and conducting tests, taking longer than usual. To avoid trouble, I now mark the due date on my car's calendar to ensure I don't exceed the deadline. In terms of insurance, overdue inspections may lead to increased premiums or delayed claims, which really isn't worth it.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

How Many Lights Should Be Turned On When Driving in Heavy Fog?

When driving in heavy fog, 3 types of lights should be turned on. Specific lights to activate: In foggy conditions, drivers should turn on fog lights, hazard warning flashers, and low beam headlights. Additionally, during fog, rain, or snow, it's also necessary to activate low beam headlights along with clearance lights and rear position lights. Light activation levels: When the fog is extremely dense with very low visibility, hazard warning flashers must be activated. This helps alert oncoming vehicles ahead. However, drivers should exercise caution when using these lights during turns or lane changes, as the turn signals become ineffective when hazard lights are on, which could potentially lead to accidents. For moderate fog conditions with relatively better visibility, front fog lights and low beam headlights should be used. Sometimes, when driving at higher speeds, rear fog lights should also be activated. In light fog conditions with higher visibility, simply turning on clearance lights and rear position lights together is sufficient.
6
2
Share

Why doesn't an automatic transmission car move when shifted to R gear without pressing the accelerator?

An automatic transmission car not moving when the accelerator is pressed may be due to the clutch not fully engaging; the handbrake not being released; the gear being stuck and not fully engaged; or wear and tear on the clutch disc. Automatic transmission gear positions: Generally, an automatic transmission has 6 to 7 gear positions, arranged in order from front to back. They are P (Park), R (Reverse), N (Neutral), D (Drive), and some Drive positions include D, 3, 2, and 1 gears. Some models have only three Drive positions (D, 2, 1). If equipped with a four-speed transmission, there may also be an overdrive selection switch (O/D) to engage the overdrive gear. Correct driving method for automatic transmission cars: Start the engine with the gear shift lever in the P position, and you must press the brake pedal to shift from P to other gear positions. When starting, push the gear shift lever to a lower gear position (i.e., 2 or 1, some may also have 3), and after the speed increases to a certain level, shift to D for normal driving. If cruising at high speed on a highway, you can use the O/D gear to save fuel.
9
2
Share

Which is Quieter: Three-Groove or Four-Groove Tires?

Theoretically, four-groove tires offer better noise reduction compared to three-groove tires, but noise reduction primarily depends on the tire's compound and carcass structure. Introduction to Tires: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. They are typically installed on metal rims to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. Performance Requirements for Tires: Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use. Therefore, they must possess high load-bearing capacity, traction performance, and shock absorption. Additionally, they require excellent wear resistance, flexibility, and low rolling resistance with minimal heat generation.
17
1
Share

How to Maintain a Car Dashboard?

Car dashboard maintenance methods are: 1. Regularly use a specially diluted cleaning agent to wipe, avoiding high concentration that may cause plastic parts to lose gloss or turn white; 2. Evenly spray the prepared cleaning agent on the surface of the dashboard, then use both a dry and a wet towel to wipe twice, first with the wet towel followed by the dry one; 3. Apply a layer of cleaning protective wax to extend its service life. The dashboard, also known as the instrument panel, is widely used in the cabins of all vehicles and engineering machinery. It mainly consists of instruments, steering wheel, dashboard shell, dashboard frame, and dashboard wiring harness.
10
1
Share

What is the Impact of a Charcoal Canister on Fuel Consumption?

Charcoal canisters can affect fuel consumption levels, and a damaged charcoal canister can lead to increased fuel consumption. Working process of the charcoal canister: Due to the adsorption properties of activated carbon, when the vehicle is running or turned off, gasoline vapors from the fuel tank enter the upper part of the charcoal canister through the pipeline, while fresh air enters the lower part of the charcoal canister. When the vehicle is in motion, the charcoal canister solenoid valve opens at the appropriate time to reintroduce the absorbed fuel vapors into the intake manifold, which saves fuel and is more environmentally friendly. Symptoms of a damaged charcoal canister: If the charcoal canister is damaged, a gasoline odor may be detected inside or around the vehicle. If the air inlet of the charcoal canister or its filter becomes clogged, it can cause fluctuations in the engine idle speed. If the charcoal canister solenoid valve remains open continuously, an overly rich air-fuel mixture can make the engine difficult to start or even cause it to stall when starting.
3
1
Share

Why Do Others Start So Fast with a Manual Transmission?

Manual transmission cars start quickly mainly due to proper clutch and throttle control. As long as the clutch and throttle are skillfully managed, manual transmission vehicles can achieve faster starts. Below is a detailed introduction to starting with a manual transmission: Correct Operation for Manual Transmission Start: For starting a manual transmission car, many beginners fear stalling. The correct sequence of operations should be to quickly depress the clutch, shift into first gear, release the handbrake, then slowly release the clutch. When you feel the vehicle begin to move forward, hold the clutch steady, lightly press the accelerator, and gradually release the clutch. Precautions for Manual Transmission Start: When starting, if you feel the engine lacks power and is about to stall, immediately press the clutch pedal again and restart. The clutch pedal must be operated according to the correct technique. Releasing it too slowly can accelerate wear on the friction surfaces of the clutch disc, pressure plate, and flywheel, leading to clutch component damage. Releasing the clutch pedal too quickly or pressing the accelerator too lightly can cause the engine to stall.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.