Is it acceptable if the reverse parking is less than 10 centimeters?

1 Answers
DeJulian
07/30/25 10:21am
Here is the relevant introduction about reverse parking: 1. Overview: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is a key evaluation point in the driver's test, requiring the examinee to correctly reverse the vehicle into a parking space from both sides while in motion. There is a time limit for reverse parking during the test. 2. Methods: There are three most common types of reverse parking. The first is the 'non'-shaped reverse parking, commonly found in large shopping malls. The second is the roadside 'one'-shaped reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking. 70% of driving students find parallel parking more challenging.
Was this review help?
16
3
Share
More Forum Discussions

What is the difference between Mercedes-Benz sports and sport+?

Mercedes-Benz does not have a sports mode, but it does have a sport mode. The sport+ mode is more sporty than the sport mode, which is the most sporty mode on the car. After turning on the sport+ mode, part of the anti-skid system will be turned off. Mercedes-Benz is a car manufacturer from Germany, and currently many models under Mercedes-Benz have been localized. Here is an introduction to Mercedes-Benz cars: 1. The models that have been localized under Mercedes-Benz include the A-Class, C-Class, E-Class, GLA, GLB, GLC, etc. 2. The C-Class is a mid-size sedan, and the domestic version of the C-Class has both standard wheelbase and long wheelbase versions. The domestic version of the C-Class uses three engines in total, which are the low-power version 1.5-liter turbocharged engine, the high-power version 1.5-liter turbocharged engine, and the 2.0-liter turbocharged engine. All three engines are matched with a 9AT transmission.
16
5
Share

How many liters of engine oil should be added for a 1.5L engine?

1.5T displacement belongs to the small car category, and adding 4L of engine oil will fill it up, as long as the oil dipstick reading is between the minimum and maximum marks. Below are the functions of engine oil: 1. Reduce wear: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear of components, an oil film of sufficient thickness needs to be established between the two sliding surfaces to separate them, thereby reducing wear and extending mechanical lifespan. 2. Cooling: Engine oil helps the radiator cool the engine by dissipating heat away from the engine. 3. Sealing and leak prevention: Engine oil forms a sealing ring between the piston rings and pistons, reducing gas leakage and preventing contaminants from entering. 4. Shock absorption: When the pressure at the engine cylinder port rises sharply, it suddenly increases the load on the piston, piston skirt, connecting rod, and crankshaft bearings. This load is transmitted and lubricated through the bearings, cushioning the impact load.
13
3
Share

What Causes a Car to Have No Response When Starting?

The car having no response when starting may be due to a depleted car battery or issues with the car's ignition system. Below is relevant information: 1. First, check the car battery. It might be that the battery is completely discharged. In this case, an external power source is needed for a jump start. If the car can start via jump-starting, it indicates the battery is depleted. After charging the battery, check its lifespan. 2. Also, inspect the car's ignition system to see if the live wire entering the ignition switch has power. If there is power, the ignition switch is functioning normally; if not, the ignition switch is faulty. 3. If the car's steering wheel is accidentally locked, this can also prevent the car from starting. In this situation, place one hand on the steering wheel and use the other hand to turn the car key back and forth. The car should start quickly. This is not a malfunction but simply the steering wheel being locked.
8
2
Share

What is the reason why the Chery Ant fails to charge?

Chery Ant may not be able to charge due to battery issues, or it could be caused by a faulty charger circuit. Poor contact can also have an impact. Below are the relevant explanations: 1. If the car fails to charge, the first step is to check whether the power supply is sufficient. The simplest way to check is to use the anti-theft device to lock and unlock, proving that the battery is in a charged state. If the battery has no power, plug in the key and check whether the meter shows any power display. 2. Then, it is necessary to check whether the electric vehicle is fully unlocked. Many new electric vehicles have a rear wheel lock, which must be opened to ensure the power flow switch supplies power normally.
13
0
Share

How to pass through with ETC during the toll-free period on highways?

During the highway toll-free period, ETC users can choose to enter through the ETC lane and exit through the ETC lane without being charged; entering through the manual lane and exiting through the manual lane also does not incur charges; entering through the manual lane and exiting through the ETC lane will not work as there is no entry information, and the exit barrier will not lift; entering through the ETC lane and exiting through the manual lane is allowed without charges. ETC usage precautions: The ETC transaction sensing area is 8 meters. When the vehicle in front stops, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic sensing and paying for the front vehicle. The speed for ETC lane recognition is 20km/h. If the speed is too fast, the vehicle device information cannot be read, leading to a failed charge. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will cause the electronic tag to fail. It can be taken to the bank where the ETC card was issued or to the highway service office for inspection. If the loosening or falling off is not due to human action, reactivation is sufficient.
3
5
Share

How to Steadily Control the Clutch?

Steadily controlling the clutch can be achieved through the following methods: 1. To ensure stable clutch control, choose shoes with slightly harder soles, as this allows for better perception of the clutch's depth and provides a more intuitive feel. Thick soles may impair your judgment of the clutch. 2. Pay attention to your posture when operating the clutch. Use the heel of your left foot as a pivot point and press the clutch pedal with the ball of your foot. When releasing the clutch, follow the principle of "fast, slow, and linkage": the clutch pedal lifting process is divided into three stages. Initially, lift quickly; when you feel the clutch pressure plate gradually engaging to the semi-linkage point, slow down the lifting speed. From semi-linkage to full engagement, the clutch pedal should be lifted slowly. 3. Coordinate the movements of both feet. When starting, press the clutch fully with your left foot, shift into first gear, and then press the brake with your right foot. Slowly release the clutch; when you notice the vehicle slightly vibrating, it indicates that the idle speed has been reached. At this point, you can release the brake, and the car will gradually move forward at idle speed. Keep your left foot on the clutch pedal at all times. To stop, press both the clutch and brake simultaneously, and the car will come to a halt.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.