···
Log in / Register

Is it a violation to turn right without using the turn signal?

1 Answers
SanMia
07/30/25 1:53am

Turning right without using the turn signal is considered a violation. Below are the relevant details: Legal Basis: When turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal must be activated in advance; When turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, the right turn signal must be activated in advance. Relevant Regulations: When passing through an intersection, motor vehicles must follow the instructions of traffic lights, traffic signs, road markings, or traffic police; when passing through an intersection without traffic lights, traffic signs, road markings, or traffic police directing traffic, drivers must slow down and yield to pedestrians and vehicles with the right of way.

Was this review help?
18
2
Share
More Forum Discussions

What are the symptoms of a faulty steering gear in the Baojun 560?

The symptom of a faulty steering gear in the Baojun 560 is that the steering wheel does not respond properly. Causes of steering gear failure: Power steering pump failure, steering gear failure, lack of oil, air in the system, or clogged return oil filter in the reservoir. Power steering pump failure: If testing shows that the pump pressure of the power steering pump does not meet the standard value, it is clear that the heavy steering is related to this. First, check whether the flow control valve and valve seat mating surface are tightly sealed, and whether the safety valve steel ball is properly closed. If there is leakage in the flow valve or safety valve, it can be repaired by grinding. Steering gear failure: If testing reveals low hydraulic pressure in the steering gear, the heavy steering is caused by the steering gear. In this case, professional repair services should be sought. Generally, steering gear failures are caused by piston or cylinder barrel damage, or a damaged piston seal ring, which allows the two chambers of the piston to communicate, preventing effective hydraulic pressure buildup. Additionally, damaged sealing rings on the piston circumference or steering screw can also lead to pressure loss and reduced hydraulic pressure. Lack of oil or air in the system: If the power steering system lacks oil, air can enter the system, resulting not only in heavy steering but also noise during steering. In this case, follow the oil refill and air bleeding procedure to remove the air.
20
1
Share

What Causes the Lack of Power When Accelerating from a Stop in a Mazda6?

Consider the following possible reasons: 1. Dead Battery: Most modern cars use maintenance-free batteries. Generally, green indicates normal battery charge, white indicates the need for charging or maintenance, and red means the battery is dead (some batteries use green for good condition, black for low charge, and white for battery damage requiring replacement). The typical lifespan of a battery is around two years. If the battery charge is found to be low, it should be replaced promptly. 2. Throttle Body Carbon Buildup: Carbon deposits in the throttle body or idle control valve can cause difficulty starting. For vehicles with an idle control valve, lightly pressing the accelerator while starting may help, but the engine may stall immediately after releasing the pedal. Therefore, it's best to have the throttle body cleaned and inspected at a repair shop. Additionally, during regular maintenance, ensure frequent replacement of the air filter. In northern regions with more dust, the air filter should be replaced every 10,000 km, or even sooner if driving on sandy or dusty roads. 3. Fuel Pressure: For proper engine startup, residual fuel pressure in the system after shutdown should not drop below 2.5–3.5 kg/cm². If pressure is too low, the fuel injectors won't deliver enough fuel for ignition. Repeatedly turning the ignition switch can temporarily restore fuel pressure, making startup easier. However, it's advisable to have a professional inspect the fuel system for faults. 4. Lubricant Quality: As winter approaches, it's essential to replace all lubricants, including engine oil, transmission fluid, and power steering fluid. Conventional lubricants thicken in cold weather, reducing flow and increasing friction, which makes cold starts difficult. Using slightly lower-viscosity oil can reduce mechanical wear and protect the engine.
10
5
Share

What Causes the Car Body to Shake When Accelerating?

There are several reasons why the car body shakes when accelerating: 1. Engine mechanical failure: such as uneven cylinder pressure in each cylinder. 2. Intake system failure: such as excessive dirt inside the intake pipe. 3. Engine management system failure: such as incorrect signals for coolant temperature or intake air temperature, or wiring faults. 4. Ignition system failure: such as excessive carbon buildup on spark plugs or incorrect gap, leakage in high-voltage wires or distributor cap, or damaged ignition coils. 5. Fuel supply system failure: such as injectors not sealing properly or clogging due to excessive carbon deposits inside the nozzle.
6
0
Share

What is the Huayra?

Huayra is a mid-engine supercar produced by Pagani. More details about the Huayra are as follows: 1. The Huayra is powered by a 6.0L twin-turbocharged V12 engine specially built by AMG for Pagani, with a maximum power output exceeding 700 horsepower and a peak torque of approximately 1000N·m. 2. The Huayra features gull-wing doors, a wedge-shaped front end, a teardrop-shaped glass cabin, alpaca-colored leather seats, and a full carbon fiber body. It integrates various multifunctional configurations such as an audio-visual system and a driving communication system, combining luxury with a strong sense of technology.
17
4
Share

How to Solve the Problem of Loud Engine Noise?

There are several solutions to the problem of loud engine noise: 1. Aging or loosening of engine mounts: Engine mounts are rubber blocks between the engine and the frame. Solution: Tighten or replace the engine mounts. 2. Improper use of engine oil: If the viscosity of the engine oil does not match the engine, it can easily cause carbon buildup, leading to increased engine noise. Solution: Use the engine oil grade specified in the vehicle manual and avoid mixing different brands of engine oil. 3. Engine misfire: An engine misfire means one or more cylinders are not functioning properly. Solution: Check the working condition of each ignition coil and cylinder spark plug.
5
1
Share

How to Release the Fuel Cut-off on a Leopard Black King Kong?

While forcefully turning the steering wheel, turn the key; generally, the steering wheel lock can be released quickly. Below is relevant information about Leopard: 1. Introduction: Leopard Automobile, short for Hunan Leopard Automobile Co., Ltd., is a comprehensive automobile manufacturer engaged in the research and development, production, sales, and service of complete vehicles and components. 2. Product Series: Leopard Automobile adheres to focused development, with the brand philosophy of 'Professional and Versatile,' establishing professional products, markets, technologies, and exclusive sales channels based on the two major categories of SUVs and pickup trucks, aiming to build an expert brand in SUVs and pickup trucks.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.