Is it a violation to turn right without using the turn signal?

1 Answers
SanAvery
07/29/25 12:01pm
Turning right without using the turn signal is not considered a violation, but it is a traffic infraction. Below is relevant information: Introduction to left turns: Not using the left turn signal is considered a violation. Generally, it won't be captured by cameras unless a traffic officer catches it on the spot. Therefore, don't take chances—for safety reasons, always use the turn signal, and it doesn't consume much power. According to Article 47 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": When overtaking, motor vehicles should turn on the left turn signal in advance, switch between high and low beams, or sound the horn. Introduction to penalty point rules: If a driver accumulates 12 penalty points within a scoring cycle, their motor vehicle driving license will be confiscated by the traffic management department of the public security authority. The driver must then participate in road traffic safety law and regulation training and pass the exam as required.
Was this review help?
19
0
Share
More Forum Discussions

What Causes No Sound in Car Radio?

The reasons for no sound in a car radio include a broken audio output wire, pressing the mute button on the radio, or a blown radio fuse. Below are the specific causes and solutions for a car radio with no sound: Specific causes of no sound in car radio: Audio output wire, i.e., the wire connected to the speaker, is broken; pressing the mute button on the radio; radio fuse is blown, causing a circuit break. Solutions for no sound in car radio: Install a signal amplifier: For many aftermarket car radios, most do not come with a signal amplifier. If you frequently encounter sudden loss of sound in the car radio, installing a signal amplifier can help. Replace the radio tuner: Whether it's an aftermarket or factory-installed car radio, after prolonged use, the signal reception may degrade, and installing a signal amplifier may not be effective. In such cases, check if there is any issue with the antenna. If not, it is likely due to aging of the radio tuner. Replacing it will improve signal reception.
4
1
Share

What brand of tire is sailwin?

sailwin is Sailwin tires, produced in Shandong, known for good wear resistance and excellent after-sales service. Here is more relevant information: 1. Car tires are one of the important components of a vehicle, ensuring good adhesion between the wheels and the road surface, thereby improving driving safety. 2. The main functions of tires are to support the entire weight of the vehicle and bear the load of the car; transmit traction and braking torque to ensure the adhesion between the wheels and the road surface; reduce and absorb vibrations and impacts during driving, prevent severe vibrations and premature damage to vehicle components, adapt to high-speed performance while reducing driving noise, and ensure safety, handling stability, comfort, and fuel efficiency. 3. The tire body needs sufficient strength and elasticity to withstand strong vibrations and impacts, as well as the repeated deformations caused by radial, lateral, and circumferential forces acting on the tire during driving. The tire body consists of one or more layers of silica cord fabric, which provides the necessary strength for the tire body and the entire outer tire.
3
0
Share

What does 17570r14 tire mean?

175 represents the tire's cross-sectional width of 175MM; 70 represents the aspect ratio; 14 represents the rim size of 14 inches. More related details are as follows: 1. Tire specifications are commonly represented by a set of numbers, with the first number indicating the tire section width and the latter indicating the rim diameter, measured in inches. 2. Some tires also include other letters or symbols with special meanings: "X" denotes high-pressure tires; "C" denotes reinforced tires; "B" denotes bias-ply tires; "-" denotes low-pressure tires. M and S are abbreviations for Mud and Snow in English, indicating that these tires are suitable for use on snowy and muddy roads. 3. There is also a special mark on tires: the wear replacement indicator. Different manufacturers have different markings—Michelin uses a small tire man, Pirelli displays a TWI mark, and some tires use a prominent white indicator.
1
4
Share

How to Use the Type-C Port in a Car?

Here are the methods for using the Type-C port in a car: 1. The Type-C port in a car can be used to connect a phone for charging, as well as for data transfer. It can transmit audio and video signals, expand to various audio and video output interfaces such as HDMI, DVI, and VGA, and even support extensions up to 4K resolution. 2. The Type-C port compliant with USB 3.1 specifications can provide up to 100W of power output, enabling bidirectional power supply through the USB Type-C interface. It can charge the device itself or power external devices simultaneously, reducing device charging time by 2-4 times.
13
3
Share

How Often Should the Three-Way Catalytic Converter Be Replaced?

The three-way catalytic converter should be replaced every 30,000 kilometers. The three-way catalytic converter is an important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO and HC emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Symptoms of a faulty three-way catalytic converter include: 1. The engine malfunction indicator light will illuminate when the engine control ECU fails to detect or detects abnormal signals from the oxygen sensor. 2. Increased fuel consumption and reduced power. 3. A clogged three-way catalytic converter can easily lead to excessive engine temperature. 4. Severe imbalance in the air-fuel ratio of the combustible mixture in the cylinders, resulting in incomplete combustion and a significant accumulation of carbon deposits in the cylinders, thereby increasing carbon buildup.
20
1
Share

What does the DISP button in a car mean?

DISP stands for screen display, which is the abbreviation of the English word 'display'. It can switch the data displayed by the trip computer. Typically, the DISP button is located on the steering wheel. By pressing the DISP button, the driver can access information such as the vehicle's mileage, fuel consumption records, remaining fuel level, remaining driving range, etc. Here is more related information: 1. A short press of the DISP button can switch the information displayed on the central multifunction display. A long press followed by a short press can be used to adjust or change configurations such as the clock. Pressing it once in the car will change the data displayed on the instrument panel. For example: if the current display shows fuel consumption per 100 kilometers, pressing it once will change it to the remaining fuel level, pressing it again will show the trip mileage, and pressing it once more will display another type of information. 2. The DISP button in a car is generally located on the steering wheel and is used to change the content displayed by the trip computer, such as fuel consumption and driving range. It can display instantaneous fuel consumption, average fuel consumption, etc. The indicator light on the lever is for the power steering system. It is normal for the light to be on when the engine is not started and the key is turned on. If the light remains on after starting the engine, it indicates a problem with the power steering system, such as difficulty in turning the steering wheel.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.