Is It a Violation to Make a Left Turn in a U-Turn Lane?

2 Answers
McMiles
08/28/25 8:17am
Making a left turn in a U-turn lane is considered a traffic violation, as it constitutes not driving in the designated lane. This offense will result in a 2-point deduction and a fine. Below are the details for specific situations: 1. Same Lane: If the U-turn lane and the left-turn lane are the same, then making a left turn in this lane does not violate traffic rules. 2. Different Lanes: If they are not the same lane, making a left turn in a U-turn lane is considered a violation. 3. Penalty Rules: If caught by traffic police or captured by electronic surveillance, the driver will face a 2-point deduction and a fine. Always keep traffic rules in mind, as a moment of negligence could lead to an accident.
Was this review help?
6
3
Share
VonClara
09/10/25 6:25am
I once made a left turn in a U-turn lane while driving and was fined 200 yuan by the traffic police, along with receiving penalty points. The reason is simple: such lanes are specifically designed for U-turns, and the signs usually indicate 'U-turn only, no left turn.' At that intersection, I was in a hurry and didn’t notice the sign clearly. With little traffic, I thought it would be fine, but the camera caught me red-handed. After the violation, I checked the traffic rules and confirmed that such an action is classified as 'failing to drive in the correct lane,' which is highly likely to result in a penalty. I recommend everyone pay attention to road signs in advance or set reminders on navigation apps to avoid making the same mistake I did. For safety reasons, this habit needs to be changed—otherwise, it could lead to accidents or even affect insurance premiums.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What is the order of yielding for left turns, right turns, and going straight?

Turning vehicles yield to straight-going vehicles, and right-turning vehicles yield to left-turning vehicles. Below are the relevant details: 1. Yielding when turning: When turning, right-turning vehicles should yield to left-turning vehicles. For vehicles traveling in opposite directions, a vehicle making a right turn should yield to a vehicle making a left turn, allowing the left-turning vehicle to proceed first. 2. Intersections without traffic lights: At intersections without traffic signals, turning vehicles must yield to straight-going vehicles and pedestrians. This is crucial; if a collision occurs between a turning vehicle and a straight-going vehicle, the turning vehicle is fully at fault. 3. Vehicles going uphill: When a vehicle is going uphill, vehicles preparing to go downhill should yield to the uphill-bound vehicle for safety reasons. When driving in a roundabout, vehicles entering should yield to those already in the roundabout, waiting in sequence. Additionally, vehicles preparing to exit the roundabout should be allowed to exit first.
11
0
Share

Does Driving a Panamera Give You Face?

The Panamera inherently falls into the luxury car category, with a price tag in the millions that is beyond the reach of average families. For ordinary salaried workers, even the down payment would likely be a significant challenge. Those who drive a Panamera are undoubtedly middle-class or wealthier individuals. Therefore, the mere ability to afford this car itself conveys a sense of prestige. Below is expanded information about the Panamera: Features of the Panamera: The Porsche Panamera boasts an extremely sporty design, powerful performance, a spacious interior, and a wagon-like trunk space, combining the advantages of sedans, high-performance sports cars, and wagons. Key changes to the Panamera: It adopts Porsche's new MSB modular platform developed for Volkswagen, featuring lightweight body design; the overall exterior has undergone minor refinements, with sleeker and more harmonious lines; the interior has been completely redesigned with upgraded configurations; it is equipped with new 2.9T and 4.0T twin-turbocharged engines; and it debuts the new 8-speed PDK dual-clutch transmission.
8
5
Share

What Causes a Ford Focus to Suddenly Fail to Start?

Reasons why a Ford Focus suddenly fails to start: Carbon deposits: Excessive carbon buildup in the idle motor, intake tract, intake valves, and combustion chamber. Excessive carbon deposits and dirt in the intake tract: Changes in the cross-sectional area of the air passage result in an overly rich or lean air-fuel mixture, causing abnormal combustion or engine shaking after starting, or even failure to start. Issues with the fuel injectors, such as leaks or excessive carbon deposits: Lead to a lean air-fuel mixture during startup, making it difficult to start. Faults in the carbon canister or carbon canister solenoid valve can also cause difficulty in starting. Additional information: From an electrical standpoint, it may be due to excessive spark plug electrode gap, decreased ignition coil energy, or short circuits or breaks in the cylinder wires. Engine mechanical faults are more complex, such as whether the valves are not sealing properly or whether there is excessive carbon buildup inside the engine. In winter, lower temperatures require more fuel for cold starts, and the presence of carbon deposits will significantly affect whether the cold start proceeds smoothly.
15
2
Share

What is the difference between seat cushions and seat covers?

The difference between seat cushions and seat covers: 1. Structure and materials: Seat cushions and seat covers are fundamentally different in structure. Seat cushions have a more complex manufacturing process, with more layers and greater thickness, resulting in higher production costs. Therefore, seat cushions are generally priced higher than seat covers in the market. While it is common for seat cushions to be more expensive than seat covers, this is not an absolute rule, as pricing also depends on material costs, quality control, brand factors, and other cost-related aspects, so it should be considered on a case-by-case basis. 2. Comfort: Seat cushions can better incorporate innovative designs and extended functionalities, whereas seat covers are relatively more limited in functionality. The thickness of seat cushions is designed to enhance comfort or insulation properties. Even the most basic seat cushion is typically three to four times thicker than a seat cover, if not more. Additionally, seat cushions can integrate more ergonomic designs, such as added lumbar support, side support, and other innovative design elements.
1
3
Share

Where is the Land Rover Bluetooth Audio Switch?

First, turn on the Bluetooth on both your phone and the car's Bluetooth device. Set the phone's Bluetooth to 'Visible to Everyone' in the settings. Then, search for Bluetooth devices on the car's system, find it, and proceed to pair and connect. Enter the pairing password to complete the connection. Here are some related introductions about car Bluetooth: 1. Introduction One: The Bluetooth technology in the car Bluetooth system is derived from mobile phone Bluetooth technology, sharing the same transmission system. Car Bluetooth is essentially an in-car wireless hands-free system designed based on wireless Bluetooth technology. Its main function is to connect with a mobile phone via Bluetooth during normal driving to enable hands-free calls, thereby freeing the driver's hands and reducing the risk of traffic accidents. 2. Introduction Two: The function of car Bluetooth is to automatically identify mobile phones, allowing connection without the need for cables or phone holders. The car owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
20
2
Share

How to Reset the Tire Pressure Warning on the Jade?

Methods to reset the tire pressure warning on the Jade: For vehicles without a Driver Information Center: 1. Turn on the ignition; 2. Press and hold the Odo/Trip button to switch the odometer display on the instrument cluster until only the total mileage is shown; 3. Press and hold the Odo/Trip button again, and after a few seconds, the low tire pressure warning light will start flashing. When you hear two beeps, the reset is complete. For vehicles equipped with a Driver Information Center: 1. Turn on the ignition; 2. Press and hold the Gage button on the right side of the Driver Information Center until the tire pressure monitoring system is displayed on the instrument cluster screen; 3. Press the arrowed Set/Reset button until the message 'Tire Pressure Monitoring System Reset' appears. The Jade is a station wagon under the Honda brand, featuring a redesigned front bumper for a more sporty appearance. In terms of body design, the Jade's side profile is not monotonous, with the B-pillar, C-pillar, and D-pillar treated in a dark color to create a floating roof visual effect.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.