Is It a Violation to Go Straight When the Left-Turn Signal Is On?

Can the Clutch and Brake Be Pressed Simultaneously in a Manual Transmission?

Theoretically, the brake and clutch can be pressed together, but pressing the clutch is equivalent to shifting into neutral. Without gear engagement, the braking distance of the car will be extended, which can easily lead to safety hazards. Especially during emergency braking, pressing both the brake and clutch in a manual transmission is more likely to cause a rear-end collision. Correct Approach: During normal driving, try to avoid pressing the brake and clutch simultaneously. The correct method is to press the brake first and then press the clutch when downshifting is required. Starting with the Brake: Foot Brake Start: With the foot brake pressed, depress the clutch, shift into first gear, and release the clutch to the semi-engagement point. When the body slightly vibrates and the front of the car lifts, release the foot brake, and the vehicle will start moving slowly. Hand Brake Start: When starting with the hand brake, there is no need to press the foot brake. This method is used on slopes where the hand brake is engaged to stabilize the parked car. The specific steps are: hold the steering wheel firmly with the left hand, depress the clutch, shift into first gear, place the right hand on the hand brake, release the clutch to the semi-engagement point, and immediately release the hand brake to allow the vehicle to move forward smoothly.

6

3

Share

Can I Add Coolant by Myself?

You can replace the car coolant by yourself. You need to purchase coolant of the same color as the original or a universal type. If the color is different, you must completely drain the original coolant before adding the new one. Coolants of different colors and brands may have different formulations. Mixing them may cause chemical reactions, which could affect the performance of the coolant. Steps to replace the coolant: Drain the old coolant, then flush the fluid channels with clean water. Add clean water to the coolant reservoir, then continuously pour water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink color. Continue adding clean water until the water coming out is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another bottle of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is purged from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.

11

2

Share

What are the differences between the Lavida Plus and the Lavida Classic?

The differences between the Lavida Plus and the Lavida Classic are mainly reflected in the following aspects: First aspect: Different platforms. The difference between the Lavida Plus and the Lavida Classic is essentially the difference between the second-generation Lavida (2012-2018) and the third-generation Lavida (2018-present). The second-generation Lavida was built on Volkswagen's PQ34 platform, while the third-generation Lavida is based on the MQB platform. After the platform change, the Lavida's dimensions increased from the original 4605/1765/1460mm to 4670/1806/1474mm, and the wheelbase was extended from 2610mm to 2688mm, hence the name Lavida Plus. Second aspect: Different exterior designs. Whether in terms of exterior styling or interior features, the Lavida Classic leans more towards entry-level A-segment models like the Bora and Santana, appearing relatively basic. In 2018, the Lavida underwent a complete redesign from head to toe, adopting a new design based on Volkswagen's latest MQB modular platform, with optimized and upgraded configurations, making it more akin to mid-range models like the Passat. As a result, the third-generation Lavida is often referred to as the 'mini Passat.' Third aspect: Different target consumer groups. The Lavida Classic is aimed at consumers with essential car needs and a relatively limited budget, though in reality, few individual buyers opt for it. The primary purchasers of the Lavida Classic are often taxi companies, ride-hailing platforms, or businesses providing company cars for their employees, commonly referred to as 'large clients.'

12

1

Share

What is the fuel consumption of the ix35 2.0?

Beijing Hyundai ix35 2.0's official comprehensive fuel consumption by the Ministry of Industry and Information Technology is: 7.1-8L/100km. The 2019 ix35 launched a total of 8 models, with the biggest change being the addition of a 1.4T version compared to the older models, along with minor adjustments and upgrades in configuration. The inclusion of the new powertrain will expand consumers' choices. Below are the relevant details: 1. Exterior and Interior: The new Beijing Hyundai ix35 is based on the styling of the older models, with refinements and adjustments in the details. The size of the front grille openings has been increased, the front bumper and the headlight clusters on both sides have been updated with new designs, and the body lines behind the C-pillar have been smoothed out. The minor facelift gives the exterior a more fashionable and rugged appearance. 2. Powertrain: The new car is equipped with a 2.0L naturally aspirated engine and a 1.4T turbocharged engine. The 2.0L engine delivers a maximum power of 118kW (160PS) and a peak torque of 193N·m, paired with a 6-speed manual or 6-speed automatic transmission. The 1.4T engine produces a maximum power of 103kW (140PS) and a peak torque of 242N·m, matched with a 7-speed dual-clutch transmission.

15

4

Share

What is the Scrap Life of a Scooter Motorcycle?

The mandatory scrap life for a scooter motorcycle is 13 years, for a three-wheeled motorcycle it is 12 years, and for other motorcycles it is also 13 years. However, it is important to note that if a lightweight two-wheeled motorcycle has accumulated a mileage exceeding 100,000 kilometers, it will also be scrapped, whichever condition comes first. Driving a motor vehicle that has reached the scrap standard on public roads will result in confiscation by the traffic management department of the public security authority, mandatory scrapping, a fine, and revocation of the motor vehicle driving license. Therefore, it is strictly prohibited to drive a scrapped motorcycle on public roads. Motorcycle scrapping process: Bring the "Application Form for Motor Vehicle Suspension, Resumption/Cancellation of Registration," the identity proof of the motor vehicle owner (ID card or organization code certificate), the motor vehicle driving license, the motor vehicle registration certificate, and the vehicle license plate to the vehicle management office window to complete the procedures. The vehicle management office will issue a delivery slip, and the scrapped vehicle should be sent to the recycling company. Use the scrapped vehicle recycling certificate issued by the recycling company to complete the scrapping procedures at the vehicle management office window. For vehicles in cities (districts), they can first be sent to the designated recycling unit within the jurisdiction, and then the recycling certificate issued by the recycling unit can be used to complete the procedures at the city vehicle management office.

4

Share

How to Open the Maserati Fuel Tank?

To open the fuel tank of a Maserati, simply press the fuel tank cover. When maintaining your Maserati, pay attention to the following aspects: 1. During routine maintenance, primarily during the first-level maintenance, drain any accumulated water and sediment from the fuel tank. Check for any oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also inspect whether the vent holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to avoid fuel spillage while driving. 2. After a period of use, perform a thorough cleaning and inspection of the fuel tank. When cleaning the tank, rinse the interior with hot water and then dry it with compressed air to remove gasoline vapors inside. After cleaning, conduct a leak test. During the test, plug all openings of the tank with rubber stoppers and submerge it in water. Introduce compressed air through the fuel pipe joint opening; if bubbles emerge from any part, it indicates a leak. Mark the leak location, remove the paint, and proceed with welding repairs. 3. For welding repairs, use different welding methods depending on the size and location of the leak. 4. If there is a significant dent in the tank wall, weld an iron rod to the dent and pull it out to restore the shape. After repair, perform another leak test on the fuel tank.

14

4

Share

Is It a Violation to Go Straight When the Left-Turn Signal Is On?

Can the Clutch and Brake Be Pressed Simultaneously in a Manual Transmission?

Can I Add Coolant by Myself?

What are the differences between the Lavida Plus and the Lavida Classic?

What is the fuel consumption of the ix35 2.0?

What is the Scrap Life of a Scooter Motorcycle?

How to Open the Maserati Fuel Tank?

How much oil should be added to the Mercedes-Benz 275 engine?

What are the dimensions of the Transit's trunk space?

What is the transmission model of the Roewe 350?

Why Does a Manual Transmission Car Jerk During Acceleration?