Is it a problem to add a bottle of fuel additive to 10 liters of gasoline?

1 Answers
Daedalus
07/30/25 5:49am
10 liters of gasoline should not directly mix with a whole bottle of fuel additive. The recommended mixing ratio for fuel additives is 1:1000. A 65ML bottle of fuel additive is designed for 50-65 liters of gasoline. For 10 liters of gasoline, approximately 10-15ML (about 1/4 bottle) of fuel additive should be added. Excessive imbalance in the mixing ratio may cause engine knocking. Precautions for adding fuel additives: Maintain the proper ratio, with fuel to additive at 1000:1; Add in batches: first pour a bottle of additive into the fuel tank, then add the appropriate proportion of gasoline. Subsequently, add half a bottle of additive for every 25 liters of gasoline refilled; Avoid excessive frequency of use. Overuse of fuel additives can easily lead to oil contamination and may adversely affect the fuel tank, engine, and the vehicle itself. Hazards of excessive fuel additive usage: Fuel additives are auxiliary products. Long-term excessive use can increase carbon deposits in the combustion chamber, leading to engine knocking and detonation. Therefore, it's important to pay attention to the quality of the fuel additive when using it.
Was this review help?
13
4
Share
More Forum Discussions

How to Replace the Battery in an Older Mercedes CLK350 Key?

The method for replacing the battery in an older Mercedes CLK350 key is as follows: 1. There is a button on the back of the key. Press this button and slide the back cover forward to open it. 2. The key battery is located in the slot nearby (during replacement, be sure to note the battery model. Most Mercedes key batteries use the 3V-CR2025 model). After opening the slot, remove the old battery and replace it with a new one. 3. Reassemble the back cover of the key in reverse order. Once fully assembled, the battery replacement is complete.
1
1
Share

What are the goals of new energy vehicles?

The overall goal of new energy vehicles is to achieve significant progress in industrialization. Advantages of new energy vehicles: From a policy perspective, China strongly advocates the development of new energy, offering not only national and local dual subsidies and exemption from purchase tax but also policies in some cities that exempt new energy vehicles from traffic restrictions. Disadvantages of new energy vehicles: Charging is relatively difficult. With the current inadequate charging infrastructure in China, charging poses a major challenge for electric vehicles. The lack of public charging stations significantly impacts the convenience of electric vehicle travel. Charging is relatively slow. Although fast-charging stations are now available, it still takes approximately 2-3 hours to fully charge a new energy vehicle.
12
4
Share

How to Replace the Battery in a Mercedes S Key?

To replace the battery in a Mercedes S key, follow these steps: 1. Press the button on the top of the remote key to remove the mechanical key inside. 2. Insert a tool into the gap of the remote key and gently pry it upward. This will cause a slight opening along the seam. Use the tool to slide downward along this gap to open the back cover of the remote key. 3. After opening the back cover, use a toothpick to remove the old battery. Then, place the new battery into the battery slot. Finally, snap the separated battery cover back into place to complete the battery replacement.
12
4
Share

What is the Cobra car?

The Cobra generally refers to Ford's Shelby sports car, also known as the Shelby. Here are the detailed specifications: 1. Powertrain: Equipped with a V8-5.4L supercharged engine, delivering a maximum power output of 550 horsepower and a peak torque of 691 Nm. The suspension system is paired with 19-inch wheels and a 6-speed manual transmission. 2. Exterior design: The Cobra features very distinctive body lines. The fully opened front section resembles a shell leading to the mechanical components. The front air vents also adopt completely undecorated radiator grilles.
9
1
Share

What is the displacement code of the second-generation Fit?

Second-generation Fit 1.3 displacement code is GE6. Below is the relevant introduction of the 2020 Fit: 1. Engine: The 2020 Honda Fit still uses a 1.5-liter naturally aspirated Earth Dreams engine. Horsepower is 131, maximum torque is 155 Nm, maximum power speed is 6600 rpm, and maximum torque speed is 4600 rpm. 2. Transmission: The 2020 Fit uses two transmissions in total, one is a 5-speed manual transmission, and the other is a CVT transmission. 3. Dimensions: The length, width, and height are 4096/1695/1525 mm respectively, and the wheelbase is 2530 mm.
2
1
Share

How to Turn on Car Air Conditioning Cooling?

Methods to activate the cooling function of car air conditioning vary depending on the type of system: 1. Manual air conditioning: Turn on the AC switch, press the AC button, then rotate the temperature control dial to the blue (cool) position. 2. Automatic air conditioning: Simply press and illuminate both the AUTO and AC buttons. The functions of car air conditioning include: 1. Cooling, heating, ventilating, and purifying the air inside the vehicle. 2. Providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Maintenance methods for car air conditioning: 1. Regularly clean the air vents. 2. Maintain the AC condenser in a timely manner. 3. Clean or replace the cabin air filter as needed.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.