Is it a problem if there is water under the car seat?

1 Answers
LeLyla
07/29/25 1:17pm
If there is water under the car seat, it is recommended to check whether the air conditioning pipe of the car is leaking. Generally, problems with the car's air conditioning pipe can cause such a phenomenon. Here are some reasons for water inside the car: Rainwater entering through the windshield: It is possible that the windshield was not closed properly, allowing rainwater to enter during rainy weather, resulting in water under the seat. Make sure to close the windows properly to avoid water ingress. Poor door sealing: If the rubber seals are not installed correctly, repeated closing and squeezing of the doors can cause the seals on both sides to deform, leading to poor sealing of the car. In severe cases, this may even cause water to enter the car during rain. Sunroof leakage: The sunroof is sealed with a rubber seal. During use, it is important to pay attention to dust prevention for the seal, especially in winter or after long-distance travel. Regularly clean the seal with a duster. Additionally, it is crucial not to force open the sunroof when it is frozen, as this can damage the sunroof motor.
Was this review help?
16
3
Share
More Forum Discussions

Does Slight Deformation of the Wheel Rim Edge Affect Safety?

Slight deformation of the wheel rim edge affects safety. It can cause tire leaks, uneven bouncing, and driving vibrations, leading to safety issues. Causes of the impact: Slight deformation of the car wheel rim can prevent the tire from fitting properly with the rim, creating gaps. Unstable tire pressure can lead to dangers such as tire blowouts and bursts. Solutions for slight wheel rim deformation: If the car wheel rim is deformed, it is recommended to replace it with a new one. When choosing a replacement, ensure the wheel rim size is appropriate for a safer fit. If opting for repair, seek professional assistance and avoid making arbitrary changes yourself, as it may lead to adverse consequences.
15
2
Share

What does a 2.0t engine mean?

2.0 refers to the displacement of the car, and the displacement of a 2.0t engine is 2.0 liters; t is the abbreviation of turbo, so a car with t is a turbocharged model, while a car without t is a naturally aspirated model. Displacement size: A 2.0t model has a larger displacement than a 1.5t model, resulting in more powerful performance, but the fuel consumption is relatively higher. Both are turbocharged, and the larger the displacement, the higher the engine's output power. Turbocharging technology: Turbocharging technology was first applied in aircraft, and its main function is to increase the intake air volume for the engine. Many car models now come with a turbocharging system, and its main working principle is to use the exhaust gas generated by the internal combustion engine to drive an air compressor. Installed in a car, it can increase the engine's power and torque, making the car's performance more powerful.
1
4
Share

How Much Does Electric Vehicle Range Decrease in Winter?

Under normal circumstances, for every degree the temperature drops, the battery's capacity decreases by approximately 1%, leading to a corresponding reduction in range. The specific decrease in mileage can be calculated based on the data displayed on the vehicle's computer. Reasons for the decrease: The lower the temperature, the harder it is for the battery's electrolyte to diffuse, slowing down the chemical reaction rate of the active materials at both electrodes, which in turn causes the battery voltage to drop. Winter vehicle usage precautions: Vehicles should not be parked for extended periods in winter. When the battery discharges below 50%, the electrolyte may freeze, making it difficult to start the engine. It is advisable to start the vehicle intermittently, avoid excessive battery discharge, and try to maintain the battery charge at around 50%.
20
2
Share

What Causes the Squeaking Sound When Turning the Steering Wheel?

The reasons for a squeaking sound when turning the steering wheel include: lack of lubrication in the steering column, low power steering fluid, universal joint failure, aging rubber bushings in the suspension stabilizer bar links, or faulty wheel bearings. If the sound originates from inside the steering wheel, it may be due to an issue with the clock spring (spiral cable). Applying some grease to the clock spring after removing the steering wheel might help; if the noise persists, replacing the clock spring is necessary. The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver on the steering wheel's edge into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and mounting clips or screw holes corresponding to the driver's airbag (DAB).
2
2
Share

What are the differences between A-segment, B-segment, and C-segment cars?

The main differences between A-segment, B-segment, and C-segment cars lie in automotive parameters such as wheelbase and engine displacement. Generally, the further the letter is in the alphabet, the longer the wheelbase, the larger the engine displacement, and the higher the level of luxury. Different car segments indicate variations in positioning, performance, and other aspects. Typically, the higher the segment, the better the positioning and performance. A-segment cars: A-segment cars refer to compact cars, such as the Ford Focus and Toyota Corolla. Vehicles in this segment have a body length between 4.3-4.79 meters, a wheelbase of 2.35-2.79 meters, and an engine displacement generally ranging from 1.4 to 2.0 liters. B-segment cars: B-segment cars refer to mid-size sedans, such as the Honda Accord, Volkswagen Passat, and Toyota Camry. These cars have a wheelbase between 2.7-3.0 meters, a body length typically between 4.8-5.0 meters, and an engine displacement generally ranging from 1.5 to 2.5 liters. C-segment cars: C-segment cars refer to premium sedans, also known as executive cars, such as the Mercedes-Benz E-Class and BMW 5 Series. Vehicles in this segment have a wheelbase of approximately 2.8-3.0 meters and an engine displacement ranging from about 2.0 to 3.5 liters.
5
1
Share

How to Obtain the Annual Inspection Sticker?

Steps to obtain the annual inspection sticker: 1. Before the inspection, prepare the required documents, including a copy of the vehicle owner's ID card, proof of payment for compulsory traffic insurance, proof of payment for vehicle and vessel tax, and the vehicle's driving license. 2. After gathering all the materials, fill out the application form for the motor vehicle inspection sticker. There is a template available at the vehicle management office, and you can fill it out accordingly. If someone else is handling the process on your behalf, an additional form needs to be filled out. 3. Submit the completed forms and all the required documents. Once the staff has recorded the information, they will print the inspection date, and you can then receive the sticker. Annual inspection refers to the yearly examination of vehicles that have already obtained official license plates and driving licenses, conducted according to the technical conditions for motor vehicle operation safety. The purpose is to check the main technical conditions of the vehicle, encourage better maintenance, ensure the vehicle remains in good condition, and guarantee driving safety.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.