Is it a problem if a piece of tire rubber comes off?

2 Answers
StMason
07/25/25 7:47am
If a piece of tire rubber comes off, it may pose a safety hazard. If the sidewall of the tire is damaged, it is recommended to replace the tire, as the sidewall rubber is the weakest part and prone to blowouts from the damaged area. If the depth and width of the damage are less than 3 millimeters, the tire can be demoted to a spare. Additional information: 1. Impact of tire rubber loss: Tire thickness is designed to meet specific requirements. If a piece of tire rubber comes off, it can affect tire pressure, potentially leading to increased pressure issues in summer. It also poses a safety risk during high-speed driving. If a piece of tire rubber comes off, it is advisable to have it inspected at a repair shop to assess the extent of wear. 2. Importance of tires: Car tires are one of the most critical components of a vehicle, bearing the weight of the car and directly contacting the road surface. Together with the suspension system, they help absorb shocks during driving, ensuring a comfortable and smooth ride. Any damage to the tires should be taken seriously, as tires bear the entire weight of the vehicle, and a blowout can be extremely dangerous.
Was this review help?
12
4
Share
LaylaFitz
08/10/25 6:41pm
I've been driving for decades and seen too many drivers overlook minor tire issues. Losing a chunk of tire tread might seem trivial, but it's actually a major hazard: location is critical. If it's on the sidewall where structural support is weak, high-speed cornering or emergency braking could cause a blowout. Last time, my neighbor ignored a small missing tread chunk and had a terrifying blowout on the highway. Even tread surface damage reduces grip, increasing skid risks in rain/snow. Immediate inspection is advised: if the chunk exposes the cord layer or covers large area (structural damage), replace immediately; minor damage may be monitored briefly but isn't safe. Regular pressure checks and avoiding potholes are crucial – safety first.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What does 'on' mean in a car?

Car 'on' means turning on. By rotating the key to the 'on' position, you can power up the car. If you continue to turn it to the 'start' position, you can start the engine. The one-button start is a part of smart cars, which is a button device that simplifies the ignition process and can also be used to turn off the engine. The one-button start can be retrofitted at the original key lock position or installed as an independent panel. The functions of the one-button start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, one-button shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, as well as the function of opening the trunk.
6
5
Share

What is the fuel consumption per 100 kilometers for the Chevrolet New Cruze 1.5 automatic?

The average fuel consumption for the New Cruze 1.5L automatic transmission is 7.5L/100km, while the 1.4T dual-clutch model consumes 7.4L/100km. Additional information: 1. Transmission: It is equipped with a 6-speed automatic manual transmission featuring auto start-stop functionality. The transmission is entirely new and differs from the 6AT in the older Cruze models, offering improved shift logic and smoother gear changes. The shifting action is relatively light, with well-controlled gear shift shock. 2. Fuel consumption: The 2018 Cruze has a combined fuel consumption ranging from 5.7L to 6.2L per 100 kilometers. Specifically, the 1.5L manual, 1.5L automatic sedan, 1.5L automatic hatchback, and 1.4T dual-clutch versions consume 5.9L, 6.1L, 6.2L, and 5.7L per 100 kilometers, respectively. Based on actual test data, the 1.5L automatic and 1.4T dual-clutch models achieve around 7.5L per 100 kilometers in urban driving conditions (average speed of about 30km/h), with even lower consumption on highways, closely matching the official figures. Actual fuel consumption may vary depending on individual driving habits and usage scenarios.
16
5
Share

How to Control the Clutch When Starting to Learn Driving?

The steps to control the clutch when starting to learn driving are: 1. Master the correct posture for pressing the clutch pedal. Place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is pressed to the lowest point, keep your knees slightly bent; 2. Do not use your toes to press the pedal or lift your heel off the ground to avoid insufficient force or slipping. Press the clutch all the way down to ensure complete separation and prevent wear; 3. When driving, do not release the clutch too quickly or deliberately raise the engine RPM too high, as this will accelerate clutch wear. Always press the clutch fully before shifting gears; 4. In low gears, beginners often experience jerking when accelerating or decelerating, especially in congested traffic conditions when following other vehicles.
5
3
Share

What kind of driver's license is needed for a 9.6-meter truck?

A B2 driver's license is required to drive a 9.6-meter truck (A1 and A2 licenses are also acceptable). For heavy and medium-sized full trailers or semi-trailer combinations, an A2 license is needed. Class A and B driver's licenses and their permitted vehicles: 1. A1 (Large Bus): (1) Permitted vehicles: Large passenger vehicles. (2) Other permitted vehicle types: A3, B1, B2, C1, C2, C3, C4, M. 2. A2 (Tractor): (1) Heavy and medium-sized full trailers or semi-trailer combinations. (2) Other permitted vehicle types: B1, B2, C1, C2, C3, C4, M. 3. A3 (City Bus): (1) Permitted vehicles: City buses with a capacity of 10 or more passengers. (2) Other permitted vehicle types: C1, C2, C3, C4. 4. B1 (Medium Bus): (1) Permitted vehicles: Medium passenger vehicles (including city buses with a capacity of 10 to 19 passengers). (2) Other permitted vehicle types: C1, C2, C3, C4, M. 5. B2 (Large Truck): (1) Permitted vehicles: Heavy and medium-sized trucks; heavy and medium-sized specialized operation vehicles. (2) Other permitted vehicle types: C1, C2, C3, C4, M.
19
3
Share

What is the actual fuel consumption of the 9th generation Accord 2.4?

The 9th generation Accord 2.4L has three models, including the 2013 Accord 2.4L-PE, SE, and LX, all equipped with a 179-horsepower engine. The NEDC fuel consumption is 8.7L per 100 kilometers. The actual fuel consumption of the 9th generation Accord 2.4 is 8.2L per 100 kilometers. A car's fuel consumption mainly depends on engine technology, transmission gear ratio, the car's aerodynamic drag coefficient, and the driver's driving habits. Generally, the engine displacement has a certain impact on a car's fuel consumption, but this impact is a fixed value. Therefore, the engine displacement does not significantly affect fuel consumption; external factors have a greater influence. A car's fuel consumption is closely related to the driver's driving habits. If the driver frequently engages in aggressive driving, such as rapid acceleration or sudden braking, it will affect the car's fuel consumption. Statistics show that incorrect driving habits can increase fuel consumption by 5-30%. Fuel consumption is also directly related to tire pressure. For models without a tire pressure monitoring display, many owners tend to overlook the importance of tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. The road conditions also affect fuel consumption. If the car frequently travels on poor road conditions, the engine load increases, leading to higher fuel consumption.
12
0
Share

How to Renew an Expiring Driver's License?

Motor vehicle drivers should apply for license renewal at the vehicle management office of the license issuing authority within 90 days before the expiration of their current driver's license. Documents required for renewal: Bring two copies of ID card, two recent 1-inch bareheaded color photos, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office). License renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other permitted vehicle type licenses must have less than 12 demerit points in the current scoring cycle. Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses with demerit points in a scoring cycle, and holders of other permitted vehicle type licenses who have caused a fatal traffic accident with equal or greater responsibility without having their driver's license revoked, must have completed the inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving license requirements; The driver's license must not be seized, detained, temporarily suspended, revoked, canceled, or annulled by law.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.