Is It a Big Problem to Put 200 kg in the Trunk?

1 Answers
VonOlivia
07/30/25 2:20am
Putting 200 kg in the trunk should not have a significant impact. It is recommended to load according to the vehicle's condition, generally allowing for about 200kg to 300kg. Here are some precautions for trunk usage: 1. Avoid placing valuables and luggage in the car: First, valuables should not be stored in the trunk, including luggage. 2. Never place flammable or explosive items in the car: Flammable and explosive items must not be stored in the trunk. Due to high temperatures in summer and road bumps, these items can easily explode, leading to danger.
Was this review help?
1
5
Share
More Forum Discussions

What Causes a Car's Air Conditioning to Suddenly Stop Blowing Air?

If a car's air conditioning suddenly stops blowing air, it may be due to a faulty temperature sensor on the evaporator core or a malfunctioning variable displacement valve on the compressor. Such faults can cause the compressor to remain continuously engaged, leading to icing of the compressor. There are several reasons why the evaporator core may freeze, with the most common being a faulty variable displacement valve on the compressor or overcharging of refrigerant, which requires prompt repair. The temperature sensor is a critical component; if it fails, it cannot detect when the evaporator core is about to freeze, causing the compressor to keep running and ultimately leading to icing of the evaporator core.
13
0
Share

What grade of engine oil should FAW Tayron use?

FAW Tayron should use 0W30 grade engine oil for the first 60,000 kilometers, and switch to 0W40 grade after 60,000 kilometers. For Tayron, fully synthetic engine oil helps the vehicle achieve optimal performance and ensures long-lasting durability. Regarding Tayron's maintenance, under normal circumstances, it is sufficient to follow the requirements and recommended items in the maintenance manual. Tayron is a premium German mid-size SUV with body dimensions of 4595 mm in length, 1860 mm in width, and 1660 mm in height, and a wheelbase of 2731 mm. Tayron comes standard with ESP and features over 60 active and passive safety systems. It is equipped with the EA888 2.0T turbocharged engine and the DQ500 seven-speed wet dual-clutch transmission.
3
2
Share

Is the Polo car produced by FAW or SAIC?

Polo is a model under SAIC Volkswagen. The Volkswagen Polo is a compact car produced by Volkswagen. The dimensions of this car are 4053 mm in length, 1740 mm in width, and 1449 mm in height, with a wheelbase of 2564 mm. In terms of power, this car is equipped with a 1.5-liter naturally aspirated engine. The maximum power of the 1.5-liter naturally aspirated engine is 83 kW, with a maximum torque of 145 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 3900 rpm. This engine features multi-point fuel injection technology and is paired with either a 6-speed automatic transmission or a 5-speed manual transmission. The front suspension of the Volkswagen Polo uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
16
1
Share

What is the difference between P gear and N gear?

The differences between P gear and N gear are: 1. Different types: P gear is called the parking gear; N gear is called the neutral gear. 2. Different functions: P gear is suitable for parking and stopping; N gear is used for short-term parking. 3. Different clutch control: In P gear, the parking gear is partially locked inside the transmission, so on flat ground without stepping on the brake, the vehicle has a certain parking effect; N gear is neutral, where the engine and the drive shaft are completely separated at the transmission position, with no connection. Therefore, P gear is suitable for parking and stopping, meaning when you arrive at your destination and are about to turn off the engine, you should shift to P gear. During driving, at intersections or for temporary stops (such as yielding to vehicles or pedestrians), N gear should be used.
13
3
Share

How often should the spark plugs of an Audi Q5 be replaced?

Audi Q5 spark plug replacement cycle: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator mainly serves to isolate the metal shell and the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.
8
5
Share

What brand is JAC?

JAC is Jianghuai Automobile, which initially manufactured commercial vehicles and later expanded into producing passenger vehicles. JAC offers a variety of sedan and SUV models. Taking the sporty A-class sedan Jiayue A5 as an example, its body dimensions are 4772mm in length, 1820mm in width, and 1492mm in height, with a wheelbase of 2760mm. The Jiayue A5 is equipped with a 1.5-liter turbocharged four-cylinder engine across all variants, delivering a maximum power of 110kW and a peak torque of 210Nm. This engine features iVVT technology and multi-point electronic fuel injection, and utilizes an aluminum alloy cylinder head and block.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.