Is Installing a Small Rearview Mirror Useful?

2 Answers
MirandaDella
09/07/25 5:40am
Adding a small convex mirror to the rearview mirror can expand the field of vision, especially when reversing, allowing the driver to observe the position of the rear wheels, making parking more accurate. The following introduces the pros and cons of small convex mirrors: Disadvantages: For sedans, the rearview mirror area is generally not large, so it is not recommended to add a small convex mirror. If you do choose to add one, it is advised to install it on the right side rearview mirror. Although SUVs have larger mirrors, their bodies are also bigger, making it difficult to see the tire position when reversing. However, since SUV rearview mirrors are larger, a small convex mirror can be installed. Advantages: The rearview mirrors of sedans/SUVs have limited area and a narrow field of vision, making it difficult to see both up and down. For example, if you want to see the tires, you might miss the road conditions behind, and vice versa. Therefore, installing a small convex mirror can help the driver observe the tire position.
Was this review help?
9
3
Share
Eva
09/19/25 4:56am
I've been using small convex mirrors for several months now and find them genuinely useful, especially for reducing blind spot risks during lane changes. Previously, I often worried about not seeing vehicles in the side rear, but now these small mirrors expand my field of vision, making it easier to observe blind spots and avoid collisions. The installation process is super simple – just buy a round or square wide-angle mirror and stick it on the edge of the rearview mirror. It costs only a few dozen yuan and fits all types of vehicles. In daily driving, I use them frequently on highways or in crowded urban areas. These small mirrors boost my confidence and also help me see the rear wheel position to prevent scratches when parking. Of course, there's slight image distortion, which takes about a week to get used to. Overall, they enhance safety without much hassle, and I highly recommend giving them a try – just remember to check the mounting regularly.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What to Do When Car Window Fails to Roll Up or Down?

Window one-touch up/down malfunction can be restored by pulling up or pressing the corresponding window switch and holding it, raising the window glass to the top, then releasing the window switch and pulling up or pressing it again. Relevant details are as follows: 1. One-touch window refers to a system where the car window glass can be controlled to move up or down to position with one press. Cars equipped with one-touch windows have a two-stage window control switch. The first stage works like a regular power window. The second stage allows the window to fully open or close automatically with a single press and release. In contrast, regular power windows require holding the switch until the window reaches the desired position, then releasing to stop the movement. 2. Nowadays, most mid-to-high-end models are equipped with one-touch window functions, mainly for the convenience of drivers and passengers, avoiding distraction from operating windows and improving safety. One-touch windows generally feature an "anti-pinch" function to prevent the risk of pinching fingers.
4
3
Share

How to Turn on the High Beam in Lavida?

Lavida's high beam control switch is located on the combination light lever on the left side of the steering wheel. To turn on the high beam, first activate the low beam by rotating the light knob, then press the combination light lever downward to engage the high beam. The high beam indicator on the dashboard will illuminate simultaneously. Below are related instructions for Lavida's high beam: The procedure for replacing the high beam bulb in the Volkswagen Lavida is as follows: 1. After turning off the vehicle, wait for the engine to cool down completely before opening the engine hood to avoid burns from high engine temperatures. 2. After opening the hood, locate the dust cover of the headlight assembly, which is typically made of rubber. Remove the high beam dust cover to access the bulb base inside the headlight assembly, then disconnect the wiring harness connector. 3. Pinch the wire clip next to the base, and once the clip loosens, the bulb can be removed directly. 4. Install the new bulb, and please observe electrical safety precautions when handling electrical components.
6
3
Share

What are the effects if the heating wire breaks during film application?

Impurities left on the air conditioning filter can mold and breed bacteria, which may harm the health of drivers and passengers, and even induce respiratory diseases. The following is relevant information about electric heating films: 1. Introduction: Low-temperature electric heating film is a semi-transparent polyester film that generates heat when electrified. It is made by processing and hot-pressing conductive special ink and metal current-carrying strips between insulating polyester films. During operation, the electric heating film serves as the heating element, radiating heat into the space, warming the human body and objects first. Its overall effect is superior to traditional convection heating methods. 2. Heating Principle: The heating principle of electric heating films involves the carbon molecular clusters in the heating element producing "Brownian motion" under the action of an electric field. Intense friction and collisions occur between carbon molecules, generating thermal energy that is transmitted externally in the form of far-infrared radiation and convection, with an electricity-to-heat conversion rate of over 98%. The action of carbon molecules causes the system's surface to heat up rapidly. When the electric heating film heating system is installed on walls (or floors), thermal energy is continuously and evenly transmitted to every corner of the room.
8
4
Share

What Causes the Dashboard Warning Light to Illuminate and the Car to Fail to Start?

When a car fails to start, the following reasons may be the cause: 1. In most cases, this issue is caused by a low battery charge. The lifespan of a car battery is typically around 2 to 3 years, and its longevity is directly influenced by driving conditions, road conditions, and driving habits. To prevent this, it is essential to avoid using the vehicle's electrical equipment, such as the radio or video player, while the engine is not running. 2. If the vehicle is parked for extended periods or frequently used for short trips, the battery may not be fully charged in time, significantly reducing its lifespan. It is advisable to drive the car on the highway periodically or use an external charger to maintain the battery. To resolve the issue, contact roadside assistance for a jump-start or consider replacing the battery. 3. Faults in the vehicle's main power supply lines or control components, such as broken circuits, damaged instrument panels, or issues with the main power control unit. These situations are less common and require a professional repair facility to diagnose the vehicle's electrical system fault codes to identify the exact cause.
17
1
Share

What are the impacts if a car's three-way catalytic converter is missing?

There will definitely be impacts. A faulty three-way catalytic converter can affect many aspects of the vehicle, including annual inspections, fuel consumption, power, and exhaust emissions. Below is relevant information about the three-way catalytic converter: 1. Working principle: When high-temperature automotive exhaust passes through the purification device, the purifying agent in the three-way catalytic converter enhances the activity of CO, HC, and NOx gases, promoting certain oxidation-reduction chemical reactions. CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize at high temperatures into water (H2O) and carbon dioxide; NOx is reduced into nitrogen and oxygen. These three harmful gases are transformed into harmless gases, thereby purifying the automotive exhaust. 2. Electronic fuel injection system: The electronic fuel injection system of a car engine generally consists of three major components: the fuel injection circuit, sensor group, and electronic control unit. If the injector is installed in the original carburetor position, meaning the entire engine has only one gasoline injection point, this is single-point fuel injection; if injectors are installed on the intake pipe of each cylinder, meaning gasoline is injected into the cylinders from multiple locations (at least one injection point per cylinder), this is multi-point fuel injection.
14
1
Share

Can I shift from D to S while driving?

You can shift from D to S gear while the car is moving. Here is an introduction to D and S gears: 1. D gear is the drive gear in an automatic transmission vehicle. After shifting to this gear, the vehicle can automatically change gears without manual shifting. 2. S gear stands for sport mode. It is used during rapid acceleration or overtaking. Here is an introduction to shifting from D to S gear: 1. When the driver needs to accelerate rapidly or overtake, they can directly shift from D to S gear without any additional operations. 2. In this mode, the transmission clutch can shift gears at a higher engine speed, resulting in faster gear changes. This gear enhances the vehicle's power performance, achieving rapid acceleration and overtaking. 3. Advantages of shifting from D to S gear: In this gear, the engine operates at a very high speed during gear shifts, providing excellent power performance during rapid acceleration and overtaking. 4. Disadvantages of shifting from D to S gear: Fuel economy is poor in this gear. Continuous use of this gear will accelerate wear and tear on the engine and transmission components, reducing their lifespan.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.