Is installing a shark fin on a car useful?

1 Answers
DiAbel
07/30/25 8:54am
Installing a shark fin on a car is useful, with the following main functions: 1. Aerodynamic effect: It helps overcome air resistance while driving, preventing interference with the car, thereby reducing fuel consumption. 2. The shark fin can enhance signal reception. Here are other considerations for installing a shark fin: 1. Installing a high-power shark fin is illegal, and if its appearance or other issues affect driving safety, it may result in penalties from traffic police. 2. If you wish to install a shark fin antenna legally, you can register and apply for approval at the vehicle management office. 3. Shark fins that come pre-installed on cars from the factory are legal, as products manufactured through legitimate and formal channels can be traced back to their source.
Was this review help?
6
5
Share
More Forum Discussions

What is the correction mantra for turning too early or too late in the Subject 2 reverse parking?

Subject 2 reverse parking correction mantra for turning too early or too late is: if turned too early, the right side will be narrow, turn the wheel back to the left; if turned too late, the left side will be narrow, keep turning the wheel to the right. The tips for Subject 2 reverse parking are as follows: Pay attention to the timing of turning the wheel: The timing of turning the steering wheel clockwise is the most important, neither too early nor too late. Turning too early may cause the car to press against the right parking line, while turning too late may cause it to press against the left parking line. Therefore, it is crucial to observe the reference point accurately. Keep the speed slow: During reverse parking, the most important thing is to maintain a slow speed. If the car deviates during the parking process, the body may start to approach the line. A slow speed allows timely correction, such as straightening the steering wheel in time. However, if the speed is too fast, there won't be enough time to make adjustments.
10
5
Share

What is the maximum RPM for first gear?

First gear should not exceed 5 km/h. Below is a detailed introduction about car gears: 1. Speed aspect: Vehicle speed refers to the distance a car travels per unit of time. The corresponding speed for first gear is 0-5 km/h. Second gear corresponds to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. 2. Gear shifting timing: Vehicle speed can also generally refer to the speed of motor vehicles. The typical gear shifting point for most cars is when the engine reaches 2000 r/min, and it should not exceed 2500 r/min. For some high-displacement, high-power engines, shifting can be done around 3000 r/min.
20
3
Share

Where is the deformation if the right front wheel is shifted backward?

The backward shift of the right front wheel is due to deformation of the suspension beam. Below is an introduction to engine-related content: 1. Energy conversion: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. 2. Device: The term engine applies both to power-generating devices and to entire machines including power units (e.g., gasoline engines, aircraft engines). Engines first originated in England, so the concept of the engine also comes from English, with its original meaning referring to 'mechanical devices that generate power.'
4
0
Share

Is the AT Transmission Prone to Failure?

Under normal usage, AT transmissions are not prone to failure and can last a lifetime. Below are the maintenance and usage precautions for AT transmissions: Maintenance schedule and methods for AT transmissions: The oil change interval for AT transmissions is typically two years or 40,000 to 60,000 kilometers. Follow the manufacturer's requirements to regularly check the transmission fluid, replace it on time, and use the manufacturer-specified grade of transmission fluid. It is recommended to use an automatic oil changer during replacement to effectively restore the transmission's performance. Precautions for using AT transmissions: While driving, avoid frequently shifting the gear lever between D (Drive), S (Sport), and L (Low) positions unless necessary. Do not shift from forward gear to reverse gear, or from reverse gear to forward gear, until the vehicle has come to a complete stop.
13
3
Share

What are the symptoms of a damaged engine head gasket?

When the engine head gasket is damaged, symptoms may include power loss with abnormal noises, white smoke from the exhaust, and burning engine oil. Here are the details: Power loss with abnormal noises: If the gasket is damaged between two cylinders, the engine will experience power loss, the car will lack driving force, and acceleration will be poor. When removing the air filter, abnormal noises can be heard at the intake pipe opening during engine idle. White smoke from the exhaust: If the damaged part of the gasket connects to the water jacket hole, the radiator may bubble or overheat, and white smoke will appear from the exhaust. Burning engine oil: If the damaged part of the gasket connects to the oil passage, some engine oil may enter the cylinders and burn, resulting in blue smoke from the exhaust.
2
1
Share

What is the tire pressure for a BMW 320d?

Under normal conditions, the tire pressure for a BMW 320d is between 2.2bar and 2.5bar. Below is a detailed introduction regarding tire pressure: Factors affecting tire pressure: Vehicle factors such as body weight and chassis height can influence the tire pressure. Tire temperature varies with the seasons, leading to different tire pressures. In winter, it is advisable to adjust the tire pressure based on the standard tire pressure, increasing it by approximately 0.2bar. In summer, follow the lower limit of the standard tire pressure. Daily maintenance of tire pressure: Regularly adjust the tire pressure and check it at least once a month to prevent accidents. Additionally, pay attention to the daily maintenance of the tires. Small stones can easily accumulate in the tire treads, which not only affects the tire's lifespan but also increases the risk of a blowout.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.