Is Installing a Car Sway Bar Useful?

1 Answers
DiAbigail
07/29/25 11:18pm
Installing a car sway bar is not useful. For ordinary family cars, the sway bar serves no purpose and only functions effectively for racing cars. The sway bar refers to a device installed horizontally in specific parts of a car, including both sway bars and stabilizer bars. Here is some information about car sway bars: 1. The function of a sway bar is to generate anti-roll resistance (Roll-Resistance) to prevent body roll when the horizontal heights of the left and right wheels differ, thereby preventing torsion of the bar. 2. The sway bar does not function when the left and right suspensions move up and down synchronously. It only comes into play when the left and right suspensions move asynchronously due to road undulations or turning maneuvers.
Was this review help?
14
0
Share
More Forum Discussions

Which country does TEIN suspension belong to?

TEIN suspension is from Japan. As a crucial component of a vehicle's suspension system, its function is to dampen the vibrations and deformation absorbed by the springs, as well as the oscillations during spring rebound, while absorbing impacts from the road surface. It directly affects the ride comfort and handling of the vehicle, thereby influencing driving safety. The working principle of the suspension is: when relative motion occurs between the frame and the axle due to vibrations, the piston inside the shock absorber moves up and down, causing the oil in the shock absorber chamber to repeatedly flow from one chamber to another through various orifices. The main components of the suspension include: lower spring seat, dust cover, spring, shock absorber pad, upper spring seat, spring seat, bearing, top rubber, and nut.
6
0
Share

How to Open the Fuel Filler Cap on the Tiggo 8?

The method to open the fuel filler cap on the Tiggo 8 is to simply press the fuel tank cap when the vehicle is unlocked. The fuel tank is a container used in vehicles or aircraft to store fuel, and it is a specialized container in the hydraulic system for storing hydraulic oil. The fuel tank can store gasoline, dissipate heat, and separate air bubbles from the oil. It can be categorized into open-type and closed-type fuel tanks. Taking the 2020 Tiggo 8 as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum power of 115 kW, and a maximum torque of 230 Nm, paired with a 6-speed manual transmission.
3
1
Share

What Causes Abnormal Noise from the Compressor?

The reasons for abnormal noise from the compressor are: 1. Abnormal noise from the compressor electromagnetic clutch: The installation position of the electromagnetic clutch is usually close to the ground and often comes into contact with rainwater and mud. When the bearing of the electromagnetic clutch is damaged, it will produce abnormal noise; 2. Abnormal noise caused by improper tension of the compressor drive belt: If the drive belt is too loose, the electromagnetic clutch is prone to slipping. If the drive belt is too tight, the load on the electromagnetic clutch will increase. Precautions for repairing abnormal noise from the compressor: 1. Do not handle refrigerant in enclosed spaces or near open flames; 2. Avoid liquid refrigerant entering the eyes or splashing onto the skin; 3. Do not place refrigerant cans directly in hot water with temperatures above 40 degrees Celsius.
12
1
Share

How to Reset Ford Vehicle Maintenance Reminder?

Ford vehicle maintenance reminder can be reset by following these steps: 1. Press the ignition switch off button while simultaneously stepping on the accelerator pedal and brake pedal; 2. Press the ignition switch on button, and after about 20 seconds the maintenance light will start flashing, then release the brake pedal and accelerator pedal to complete the reset. Ford is a sub-brand under the American Ford Motor Company, with models including the Everest, Explorer, Territory, Mondeo, Kuga, etc. Taking the 2020 Mondeo as an example, it is a mid-size car with body dimensions of 4873mm in length, 1852mm in width, 1470mm in height, a wheelbase of 2850mm, and a curb weight of 1592kg.
5
2
Share

How to Use N and D Gears?

Here is a detailed introduction on the usage of N and D gears: 1. N Gear: The N gear is used when the vehicle is temporarily stopped. It is the neutral gear in automatic transmission vehicles and one of the three standard gears in automatic transmission models, located between the R and D gears on the gear shift console. Its purpose is to cut off the power transmission between the input and output shafts inside the transmission. 2. D Gear: The D gear is generally used for stable road conditions, such as urban roads or highways. When shifting from P to D gear, firmly press the brake pedal and quickly move the gear shift lever to the D gear in one motion without pausing at the R or N gears to minimize vibration and impact during the shift. When shifting from R to D gear, also firmly press the brake pedal, but pause briefly at the N gear before moving to the D position to reduce the impact of reverse oil flow inside the transmission.
5
4
Share

What is the correct sequence to start a car?

Starting a car involves the following sequence: 1. Insert the key and turn it to the ACC position to unlock; 2. Turn the key to the ON position and wait for a few seconds to allow the vehicle to connect to partial power and prepare; 3. Turn the key to the START position and release it after 3 seconds. The steps for moving the car are: 1. Press the foot brake and press the start button twice to initiate the car's computer system self-check, waiting at least 6 seconds; 2. Press the foot brake and press the start/stop button to ignite; 3. Release the foot brake and let the car warm up in place; 4. Press the foot brake, release the handbrake, and shift the gear from P to D; 5. Slowly release the foot brake to start moving; 6. Then, depending on road conditions, smoothly press the accelerator to speed up and drive safely.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.