Is Honda's Crystal Pearl White a Metallic Paint?

2 Answers
DeFrancisco
07/28/25 6:51pm
Honda's Crystal Pearl White is not a metallic paint. Additional information: Advantages of automotive paint: excellent film fullness, high gloss, high hardness, good adhesion, superior mechanical properties of the paint film, outstanding gloss retention, weather resistance, and abrasion resistance, as well as good resistance to acids, alkalis, alcohol, and gasoline. Classification of automotive paint: Automotive paint can be roughly divided into solid paint, metallic paint, and pearl paint. Solid paint is the most basic type, usually in white and red, with a pure overall color; metallic paint is based on solid paint with the addition of metal powders such as aluminum and copper, giving the paint a more textured appearance; pearl paint, on the other hand, is more dazzling, similar to metallic paint but with the addition of mica particles, making it radiant under sunlight.
Was this review help?
18
1
Share
Daryl
08/12/25 12:17am
When I bought the Accord, I struggled with the color choice. The salesperson said Crystal White is a plain non-metallic paint, not a metallic one. Metallic paint reflects light with a granular effect in sunlight, while Crystal White is a pure white tone with a particularly solid look, similar to the dense feel of snow. Actually, its painting process is quite meticulous, with special brightening agents added to the paint layer to make it exceptionally luminous, but it indeed lacks metal powder. The advantage is that touch-ups are cheaper and less likely to show color mismatch. When a friend scratched the rear bumper while reversing, it only cost 300 yuan to fix. If it were metallic paint, repairs would be more expensive and the touch-up marks would be more noticeable.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

Is the Audi Q7 a pure import?

Audi Q7 is a pure import and a mid-to-large-sized SUV. Taking the 2012 Audi Q7 as an example, its body dimensions are: length 5067mm, width 1970mm, height 1731mm, wheelbase 2996mm, fuel tank capacity 85l, and curb weight 2115kg. The 2012 Audi Q7 is equipped with a 2.0T turbocharged engine, with a maximum power of 180kW and a maximum torque of 370Nm, paired with an 8-speed automatic manual transmission. It adopts a front-engine four-wheel-drive layout, and both front and rear suspensions use multi-link independent suspension.
13
0
Share

How to Check the Engine Oil Level in a Lynk & Co 01?

The method to check the engine oil level in a Lynk & Co 01 is: 1. The oil dipstick of the Lynk & Co 01 is located on the dashboard. Without pressing the brake pedal, hold down the start button for ten seconds, and the oil condition will be displayed on the dashboard; 2. When checking, ensure that all four wheels of the car are parked at the same horizontal level, and the body should not be tilted. If the body is tilted, the oil level in the oil pan will change, resulting in inaccurate measurements. Taking the 2020 Lynk & Co 01 as an example, it belongs to the compact SUV category, with body dimensions of: length 4512mm, width 1857mm, height 1689mm, a wheelbase of 2734mm, and a curb weight of 1736kg.
11
4
Share

What is the Maybach S500?

Maybach S refers to the Maybach S-Class sedan, but the Maybach S-Class sedan only comes in S450, S560, and S680 models. Below are the specific details of the Maybach S-Class sedan: 1. S450: Equipped with a 3.0-liter twin-turbocharged engine, the 3.0-liter twin-turbocharged engine has a maximum power output of 270 kW, maximum torque of 500 Nm, maximum power speed of 5500 rpm, and maximum torque speed ranging from 1800 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission. 2. S560: Equipped with a 4.0-liter twin-turbocharged engine, the 4.0-liter twin-turbocharged engine has a maximum power output of 345 kW, maximum torque of 700 Nm, maximum power speed of 5250 rpm, and maximum torque speed ranging from 2000 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission. 3. S680: Equipped with a 6.0-liter twin-turbocharged engine, the 6.0-liter twin-turbocharged engine has a maximum power output of 463 kW, maximum torque of 1000 Nm, maximum power speed of 4800 rpm, and maximum torque speed ranging from 2300 to 4200 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed automatic transmission.
19
0
Share

How long does it take to get the car back after a full-body paint job?

Different 4S shops have varying paint job durations, typically around one week to get the car back. Below are methods for maintaining car paint: 1. Apply a paint protection film (PPF): PPF effectively protects the vehicle's paint, causing no harm to the original paint while ensuring the paint's glossiness. It's currently a highly recommended method. 2. Characteristics of PPF: PPF is applied in separate sections. Each section is independently applied, allowing for direct replacement if damaged without affecting other sections of the film.
8
2
Share

What Causes Abnormal Noise During Engine Idling?

Engine idle abnormal noise may be caused by the following reasons: Timing chain elongation, tensioner pressure loss, balance shaft wear: Timing chain elongation is generally caused by metal fatigue. After prolonged driving combined with the high-temperature working environment of the timing chain, elongation can easily occur, leading to abnormal noise. The tensioner is connected to the oil passage and adjusts the tightness of the timing chain through oil pressure. If the tensioner oil passage is blocked or the internal check valve loses pressure, the chain may loosen and produce noise. The balance shaft is used to reduce vibrations generated during engine operation. If the balance shaft oil passage is blocked, it can increase wear on the journal and bearings, resulting in noise. Camshaft, crankshaft, and connecting rod bearing wear: If the vehicle uses low-quality oil, excessive sludge may form in the engine, blocking the lubrication oil passages and preventing oil from reaching components that require lubrication and cooling. This can cause wear on the camshaft, crankshaft, and connecting rod bearings, leading to noise. Additionally, if the engine lacks coolant, causing excessive engine temperature, the above phenomena may also occur. In severe cases, it can even lead to cylinder scuffing or bearing seizure. Increased timing variable wheel clearance: Variable valve timing can adjust according to engine speed and operating conditions, typically using hydraulic control to advance or delay the camshaft timing gear's internal rotor by a certain angle. If the variable timing wheel's internal rotor is stuck or the oil cavity is worn, the clearance may increase, causing noise. Excessive valve clearance or damaged rocker arm: The rocker arm is a lever mechanism that presses the valve, and the valve clearance is mainly controlled by the hydraulic lifter. Damage to either can result in valve noise.
6
5
Share

How to Identify Engine Oil Grade?

To identify the engine oil grade, note that oil grades range from SA to SN, with this designation indicating the oil quality. The further the letter after 'S' is in the alphabet, the higher the oil quality. Engine oil grades are categorized as follows: 1. 'S' stands for gasoline engine oil, and 'L' represents the grade. The later the letter, the higher the oil grade. 2. 'C' stands for diesel engine oil, and 'F' represents the grade. Similarly, the later the letter, the higher the oil grade. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Minimizing gas leakage and preventing contamination from external pollutants; 3. Protecting against contact with water, air, and acidic harmful gases; 4. Cushioning the pressure rise in the engine cylinder; 5. Cleaning dirt generated on the working surfaces of components.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.