Is Green Channel Free if the Vehicle License Is Lost?

1 Answers
ElijahDella
07/24/25 10:47pm
After losing the vehicle license, the Green Channel is not free. The original vehicle license must be presented to enjoy the Green Channel free pass. A photo of the original license cannot be used as a substitute. Standards for Green Channel vehicles to enjoy toll-free benefits: The loaded goods must be Green Channel-approved products, the vehicle must have a freight transport permit, and relevant Green Channel documents. If all three standards are met, and there is no mixing with non-fresh agricultural products, the vehicle can enjoy toll-free highway benefits if either the vehicle's approved load capacity or the compartment volume reaches 80% or more. Overloaded Green Channel vehicles are not eligible for free passage: Green Channel vehicles transporting fresh agricultural products that violate overload regulations will not be eligible for toll-free benefits on toll roads for that trip. On non-toll roads, the primary response will be criticism and education, with no penalties imposed for the time being.
Was this review help?
10
0
Share
More Forum Discussions

Is the Honda XR-V equipped with an Earth Dreams engine?

The engine of the Honda XR-V is an Earth Dreams engine, produced by Guangqi Honda Automobile Co., Ltd., and is a domestically manufactured engine. The 1.5L version of the Honda XR-V has an engine model L15B5, with a maximum horsepower of 131, a maximum power output of 96 kW, and a maximum torque of 155 Nm. The 1.5T version has an engine model L15BS, with a maximum horsepower of 177, a maximum power output of 130 kW, and a maximum torque of 220 Nm. For daily maintenance of the Honda XR-V engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may rupture or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
7
2
Share

What Causes the Engine Emission Control System Warning Light to Illuminate?

The engine emission control system warning light illuminates due to unstable engine operating conditions leading to emission system malfunctions. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the piston to perform work. Engine maintenance methods include: 1. Regularly changing the engine oil and filter; 2. Using lubricating oil of the appropriate quality grade; 3. Periodically cleaning the radiator; 4. Regularly servicing the air filter, oil filter, and fuel filter; 5. Maintaining good crankcase ventilation with regular cleaning; 6. Periodically cleaning the fuel system.
2
4
Share

How to adjust the time on a 2012 Kia K2?

The method to adjust the time on a 2012 Kia K2 is: 1. Start the vehicle; 2. Press the CLOCK button on the multimedia control panel, observe the hour flashing on the clock display, then use the volume adjustment knob to set the correct hour; 3. Press the multimedia power button again to switch to minute adjustment. Taking the 2012 Kia K2 as an example, it is a compact car with body dimensions of: length 4370mm, width 1700mm, height 1460mm, wheelbase 2570mm, minimum ground clearance 110mm, fuel tank capacity 43L, and curb weight 1072kg.
17
4
Share

What is the reason why the automatic headlights of the Tiguan L stay on during the day?

What is the reason why the automatic headlights of the Tiguan L stay on during the day: 1. Faulty light sensor; 2. Light sensor is blocked; 3. High sensitivity of the brightness sensor. Taking the 2017 Tiguan as an example, it is a compact SUV with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm and a curb weight of 1600kg. The 2017 Tiguan is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum torque of 250Nm, and a maximum power of 118kW, paired with a 6-speed automatic transmission.
19
5
Share

What is the reason for the EPC light coming on, the vehicle shaking, and then returning to normal after restarting?

The reasons for the EPC light coming on, the vehicle shaking, and then returning to normal after restarting are: 1. Dirty throttle body of the vehicle's engine; 2. Damaged electronic control unit of the throttle body; 3. Faulty accelerator pedal sensor. The appearance of the EPC light on the vehicle's dashboard indicates a malfunction in the mechanical and electronic systems. The causes of the EPC light appearing are: 1. Dirty throttle body; 2. Brake lights not working; 3. Poor fuel quality. The solutions for the EPC light display are: 1. Check if there is a fault in the intake system; 2. Use high-quality fuel; 3. Check if the electronic throttle body is too dirty and clean it if necessary; 4. Remove carbon deposits from related parts; 5. Rewrite the ECU related data.
9
0
Share

What Causes a Motorcycle to Make a Buzzing Sound but Not Start When Igniting?

The reasons why a motorcycle makes a buzzing sound but does not start when igniting are: 1. The battery is old and has no power; 2. In winter, the engine has not completed preheating due to low temperatures; 3. Spark plug failure, caused by prolonged use leading to performance degradation; 4. There is no gasoline left in the fuel tank; 5. Low temperatures cause the viscosity of the motorcycle's engine oil to increase, and in extreme cold, the oil may even solidify into clumps. The methods to start a motorcycle are: 1. Use the main stand to prop up the bike on level ground; 2. Stand in the direction the kickstarter is pressed—if the kickstarter is pressed forward, face forward and step on it to ignite; 3. If the kickstarter is pressed backward, face backward and step on it to ignite.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.