Is Glass Scratch Repair Fluid Effective?

2 Answers
DelKennedy
07/25/25 5:45am
It is most effective when used indoors, as only then can the best repair results be achieved. Below is more information about automotive glass: 1. Classification of automotive glass: Automotive glass mainly falls into the following three categories: laminated glass, tempered glass, and zoned tempered glass, which can withstand strong impacts. Automotive glass is categorized by its location into: front windshield, side window glass, rear windshield, and sunroof glass. 2. Manufacturing of automotive glass: Automotive glass is manufactured by heating the glass in a furnace to near its softening temperature, then rapidly transferring it to air grids with varying cooling intensities for uneven cooling. This process creates different stress levels between the main viewing area and the peripheral areas of the glass. Generally, glass produced this way is zoned tempered glass.
Was this review help?
15
2
Share
Bradley
08/10/25 5:52pm
Last time I had a small scratch on my car window, I bought some repair fluid to try it out. The effect was okay, mainly for superficial scratches. After applying it to fill in the scratch, it became less noticeable, but deeper ones didn’t work as well. When using it, I had to make sure the glass was clean and the temperature was suitable, otherwise it was hard to handle. The downside is that the repaired area might oxidize and turn yellow over time, requiring reapplication. For daily driving, it’s best not to wait until there are multiple scratches—address minor ones early, otherwise visibility can be seriously affected during rain or at night, which is quite dangerous. Overall, it’s a cost-effective and convenient DIY solution for small issues, but for major scratches, it’s better to go to a professional shop. Also, when washing the car, use a soft cloth to avoid hard objects damaging the glass and prolong its lifespan.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Where is the cigarette lighter fuse in the 2012 Focus?

The cigarette lighter fuse in the 2012 Focus is located behind a cover on the left side of the driver's seat. Here are the details: 1. Function of the cigarette lighter: The Ford Focus is equipped with a cigarette lighter for the convenience of drivers. Although smoking in the car is discouraged, this feature is not removed. Some high-end models even have an additional cigarette lighter in the rear for passengers. 2. Introduction to the cigarette lighter: The cigarette lighter operates at 12 volts, matching the vehicle's battery voltage. It usually has a dedicated power line connected to it, separate from other circuits, hence it has its own fuse. The correct way to use it is to insert and remove it vertically without shaking, as frequent shaking during removal can cause loosening and short circuits, which may burn out the fuse and external devices.
20
1
Share

What are the reasons for oil burning in the 2015 Haval H9?

Here are the reasons for oil burning in the 2015 Haval H9: 1. Poor fuel quality: The primary cause of oil burning in vehicles is poor fuel quality. When fuel cannot be fully combusted, it generates a large amount of carbon deposits. Over time, these deposits accumulate and thicken, with some entering the piston, causing piston ring sticking and clogging the oil return holes. This creates gaps in the engine, allowing oil to enter the combustion chamber and burn, resulting in oil burning. 2. Incomplete fuel combustion: Due to traffic congestion, especially for vehicles driving in urban areas, frequent stops and starts prevent effective fuel combustion, leading to the formation of excessive carbon deposits. These deposits block the oil return holes, preventing the oil scraper ring from removing oil from the cylinder walls. As a result, the oil remains in the combustion chamber and burns, causing oil burning.
6
2
Share

Where is the Highlander headlight height adjustment located?

Lift the engine hood and locate the adjustment knob at the rear of the headlight assembly. Use the appropriate tool for adjustment, but first determine whether to adjust left/right or up/down. Park the vehicle facing a wall at a distance of approximately 10 meters. Observe the height of the left and right lights, use tape or other markers for measurement, comparison, and adjustment. After adjusting the horizontal alignment of the headlights, find a reference point on the vehicle for comparison. Adjust the headlight height at a distance of about 10 meters, and adjust the horizontal position when closer. After completing the adjustments, observe from both inside and outside the vehicle. Simulate the opposing height for verification and fine-tune repeatedly until satisfactory.
10
0
Share

What to Do When Your Car's Smart Key Battery Is Low?

First, prepare the necessary tools: a small flathead screwdriver, the car key, and the compatible battery for the car key. On one side of the car key, there is a button. Press it to remove the mechanical key. Insert the flathead screwdriver into the "open" position at the front end of the key to pry open the key casing. Gently separate the key into two halves, then use the flathead screwdriver to lift out the battery. After removing the old battery, insert the new one, ensuring the ± polarity is correctly aligned.
16
3
Share

How to Determine if the Heater Core is Faulty?

Methods to determine if the heater core is faulty: 1. Leakage from the core is easily noticeable. Minor leaks can be detected near the water pump vent, while significant leaks will directly drip onto the ground through the chassis. 2. Open the car's radiator cap to observe the coolant. If the coolant does not show a noticeable vortex, it indicates an issue with the water pump, especially in high-temperature summer conditions when the engine temperature rises. 3. A faulty core can cause unusual noises in the car, often due to bearing issues in the water pump. 4. Since the car's water pump is connected via a belt to circulate cold water from the radiator, any impairment in the pump's rotation directly affects engine performance, leading to unstable vehicle speed. Prolonged use of the engine's radiator can cause rust and scale buildup, restricting coolant flow in the cooling system, reducing heat dissipation, and potentially damaging the engine.
12
5
Share

Why can't the Roewe RX5 start despite having electricity?

Here are the reasons why the Roewe RX5 may have electricity but cannot start: 1. Circuit or electronic failure: The occurrence is very sudden, with no warning signs. Circuit failures include: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor head, or damaged spark plug. Electronic failure mainly refers to the central computer control board losing function. 2. Fuel system failure: Stalling caused by fuel system issues often comes with symptoms like weak engine power and the accelerator pedal feeling like stepping on cotton. Possible fuel system failure locations include: malfunctioning fuel pump, blocked fuel line, clogged fuel filter, failed carburetor, damaged injector, etc. Sometimes, the fuel tank may be empty without the owner realizing it.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.