Is Geely a domestic or joint venture brand?

1 Answers
DelKinsley
07/28/25 7:33pm
Geely is a domestic vehicle model, not a joint venture car. Geely is a Chinese automotive brand primarily producing SUVs, sedans, and other vehicle types. It owns six automobile brands: Geely, Lynk & Co, Volvo, London Taxi, Proton, and Lotus. Taking the Geely Vision X6 as an example, this vehicle is a compact SUV under the Geely brand, with dimensions of 4546mm in length, 1834mm in width, and 1715mm in height, and a wheelbase of 2661mm. The Geely Vision X6 is equipped with safety features such as full-speed ACC adaptive cruise control, a 360-degree 3D panoramic imaging system, an 8-in-1 Bosch ESP electronic stability program, and a comprehensive safety warning system.
Was this review help?
9
5
Share
More Forum Discussions

What is the Principle of the Tire Pressure Monitoring System?

There are two principles of automotive tire pressure monitoring: 1. Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. A wireless transmitter sends the pressure information from inside the tire to a central receiver module, which then displays the data for each tire's pressure. When the tire pressure is too low or there is a leak, the system automatically alerts the driver. 2. Indirect Tire Pressure Monitoring: Indirect tire pressure monitoring works by detecting when the air pressure in a tire decreases, causing the vehicle's weight to make that tire's rolling radius smaller, which in turn makes it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the tire's rolling radius to monitor air pressure.
1
1
Share

How to Maintain Car Brake Pads?

Here are the methods to check car brake pads: 1. Listen for sounds. If you hear a metallic scraping sound when lightly applying the brakes, it indicates a problem with the brake pads, and they should be replaced immediately at a repair shop. 2. Check the thickness of the brake pads. A new brake pad is about 1.5 cm thick. When the thickness is visibly reduced to one-third of its original size, increase the frequency of inspections and be prepared to replace the brake pads at a repair shop. 3. Pay attention to braking performance. When the brake pads become thinner, the braking effect will be affected. Additional information about brake pads: 1. Brake pads, also known as brake linings, are critical safety components in a car's braking system. The effectiveness of all braking depends largely on the condition of the brake pads. 2. Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT4 furnace temperature tracker to ensure quality by detecting the temperature distribution during coating.
12
5
Share

How often should the transmission fluid of a Volkswagen Passat be changed?

Volkswagen Passat transmission fluid should be changed every 50,000 kilometers, with a replacement capacity of 5L. Replacement method: Add new transmission fluid into the circulation machine, connect the circulation machine to the transmission oil circuit interface. The function of the circulation machine is to push out the old oil with the new oil, achieving a replacement between the old and new. This method cleans the oil circuit more thoroughly. More information about the Volkswagen Passat is as follows: 1. The Passat is a mid-size sedan designed by Volkswagen AG in Germany. The car's length, width, and height are 4870 mm, 1834 mm, and 1472 mm respectively, with a wheelbase of 2803 mm. 2. The Passat is front-engine, front-wheel drive. The front suspension type is MacPherson independent suspension, and the rear suspension is multi-link independent suspension.
10
4
Share

What letter represents neutral gear?

Neutral gear is represented by the letter N. Neutral gear can be used when starting the vehicle or during towing. When waiting at traffic signals or in traffic jams, the gear selector is often kept in the D position while the brake is pressed. If the stop is very brief, this is acceptable, but for longer stops, it is better to shift into N position and engage the parking brake. Precautions when using neutral gear are as follows: 1. When coasting in neutral, the difference between the vehicle's speed and the engine's RPM can increase friction, reduce lubrication effectiveness, and accelerate the wear of the automatic transmission's internal friction plates. 2. Coasting in neutral also affects braking. Teng Hua Automatic Transmission Repair reminds that when coasting in neutral, since the engine and transmission are disconnected, the vehicle will continue to accelerate, becoming faster and faster. If the distance between vehicles is short and the leading vehicle stops suddenly, the likelihood of a rear-end collision increases significantly.
19
5
Share

How to Determine the Maximum Speed Rating of Car Tires?

Generally, tire specifications can be described as: tire width in mm/percentage of tire thickness to width, R rim diameter (in inches), load index, speed symbol. For example: 195/65R15 88H, where H represents the maximum speed rating. More information about car tires is as follows: 1. Car tires limit the vehicle speed. Different tires have varying speed requirements. Drivers must strictly adhere to the tire's speed limits during operation; otherwise, it will significantly reduce the tire's lifespan and increase the risk of blowouts. 2. Tires with different speed ratings have different applicable ranges. P-T rated tires (maximum speed 150-190 km/h) are suitable for small and compact cars, U-V rated tires (maximum speed 200-240 km/h) are for mid-to-high-end sedans, while W-Z rated tires (maximum speed 240-300 km/h) offer better performance and are more commonly used in large luxury cars and supercars.
20
0
Share

What are the steps for changing engine oil?

The steps for changing engine oil are as follows: 1. After driving the car onto the lift, turn off the engine, use the lift to raise the vehicle, engage the handbrake, and secure the front wheels with wooden wedges; 2. Place an old oil container under the oil pan, locate the oil pan drain bolt, and slowly loosen the drain bolt, being careful not to come into contact with the hot oil; 3. Move the oil container under the oil filter, use an oil filter wrench to loosen the filter, then unscrew it by hand. If the filter is still hot, remember to wear gloves; 4. Refer to the user manual to select the appropriate oil filter; 5. Apply new oil to the gasket of the new filter. If the filter is installed vertically, you can pour some new oil into the filter to reduce dry friction during the next engine start; 6. Pour the new oil into the oil pan, following the instructions in the user manual. Use a funnel to prevent spilling oil on the outside of the engine.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.