Is Gasoline + 48V Mild Hybrid System Considered a Hybrid?

1 Answers
LukeDella
07/25/25 6:12am
Gasoline + 48V mild hybrid system is actually a more efficient hybrid power system, which has begun to be successively installed in high-end sedans such as the Audi A8L and will become the main trend of mild hybrid systems in the future. Compared with the ordinary 12V hybrid system, the 48V mild hybrid system has many advantages, mainly reflected in the electrical support and optimization for braking, starting, and start-stop systems. More information about the gasoline + 48V mild hybrid system is as follows: 1. When the engine is at low speed, the 48V mild hybrid system can maintain the operation of the air conditioning. Additionally, the 48V mild hybrid system with a power system can assist the vehicle in starting, using electricity during the most fuel-consuming starting process to effectively save fuel. 2. The battery life of the 48V mild hybrid system generally exceeds 5 years. The 48V mild hybrid system uses a 48V battery, so both the cost and technology are significantly higher than those of the 12V system. The 48V mild hybrid system mainly consists of a motor, battery, and voltage converter.
Was this review help?
6
0
Share
More Forum Discussions

Can I file a claim if the car is transferred but the insurance is not?

Can I file a claim if the car is transferred but the insurance is not? The specific reasons are as follows: Reasons why you can file a claim if the car is transferred but the insurance is not: If the car has been transferred but the insurance has not, the insurance company will still compensate for a traffic accident. As long as the vehicle was transferred before the accident occurred, regardless of whether the car insurance policy has been transferred, the actual insured is the actual owner of the car. Therefore, when the vehicle is involved in a traffic accident, the actual owner can indeed file a claim with the insurance company. However, it is not ruled out that some unscrupulous insurance companies may refuse to pay on this ground. In such cases, the owner can directly use legal means to protect their rights. Reasons why the insurance company may refuse to pay if the car is transferred but the insurance is not: Of course, under certain circumstances, the insurance company can indeed refuse to pay. For example, if the new actual owner is driving without a license or is drunk driving after the vehicle is transferred, the insurance company will definitely not compensate. Additionally, if the new owner uses a non-commercial vehicle for commercial activities after the transfer, the insurance company will also refuse to pay once discovered.
5
3
Share

What is the reason why the Magotan car door cannot be opened from the outside but can be opened from the inside?

The reasons why the Magotan car door cannot be opened from the outside but can be opened from the inside are: 1. The outer door handle switch is faulty; 2. The cable inside the outer door handle switch is broken; 3. The car door lock is stuck. Taking the 2020 Comfort Magotan as an example, its body length, width, and height are: 4865mm, 1832mm, 1471mm, the wheelbase is 2871mm, and the fuel tank capacity is 66l. The front suspension of the 2020 Comfort Magotan is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.4l turbocharged engine, with a maximum horsepower of 150ps, a maximum power of 110kw, a maximum torque of 250nm, and is matched with a 7-speed dual-clutch transmission.
9
4
Share

What is the solution for the car navigation button lights not working?

The solution for the car navigation button lights not working is: 1. Connect the small light wire to the navigation host; 2. Reinsert the memory card or graphics card. On the navigation, the red line indicates that the route chosen by the driver is congested, the green line indicates smooth traffic, the yellow line indicates crowded conditions, and the dark red line indicates severe congestion. The functions of navigation are: 1. Searching and processing map data; 2. Map matching; 3. Planning the travel route; 4. Human-machine interaction interface; 5. Wireless communication. Navigation has the GPS global satellite positioning system function. Drivers input the destination into the car navigation system, and the system will automatically calculate the appropriate route based on the electronic map and remind the driver to follow the calculated route during the vehicle's movement.
12
0
Share

Where is the location to add water in a car?

The place to add water in a car is under the hood, on the left side of the engine. The precautions for adding water are as follows: Precautions for adding antifreeze to the car: The part near the front of the car is for adding windshield washer fluid, and the part near the windshield is for adding antifreeze. Neither windshield washer fluid nor antifreeze can be replaced with water. Specialized products must be used, and antifreeze cannot be replaced with tap water. The boiling point of antifreeze is above 120 degrees Celsius, while the boiling point of water is only 100 degrees Celsius. Using antifreeze can prevent the car from "boiling over" in summer. Using water instead of antifreeze can easily cause scale buildup, requiring frequent replacement, whereas using antifreeze does not have this issue. Water can cause some corrosion to the cooling system, while antifreeze contains additives that prevent corrosion and rust. For fuel-efficient household cars, never use tap water instead of antifreeze. Reasons why windshield washer fluid cannot be replaced with tap water: Windshield washer fluid cannot be replaced with tap water. Compared to tap water, windshield washer fluid has a lower freezing point. The freezing point of tap water is 0 degrees, so tap water will freeze below 0 degrees, but windshield washer fluid can resist freezing down to -25 degrees. Therefore, if the environmental temperature in the area is below 0 degrees, antifreeze windshield washer fluid must be used. Tap water contains more minerals and impurities. If tap water is used for a period of time, the spray nozzle may become clogged with impurities and scale, preventing normal spraying.
14
4
Share

What is the solution for engine belt noise?

Engine belt noise is caused by friction between the belt and the pulley contact surface. When there is an issue with the engine belt, it needs to be replaced promptly. The function of the car engine belt is to transmit the force from the crankshaft to drive components such as the water pump and alternator. The steps to replace the car engine belt are: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, locate the alternator belt; 4. Remove the exposed old alternator belt; 5. Install the new engine belt; 6. Complete the engine belt replacement.
18
4
Share

What happens if too much starting fluid is sprayed?

Spraying too much starting fluid can lead to increased engine wear and a decline in the overall performance of diesel engines. Starting fluid is an automotive auxiliary product containing compressed liquid to help vehicles start in harsh environments. The composition of starting fluid is a low-ignition-point compound, with a low flash point and high volatility, enabling the engine to start at low temperatures. Precautions for using starting fluid include: 1. Preheat the engine before using starting fluid; 2. Do not directly spray low-temperature starting fluid; 3. Low-temperature starting fluid should not be used simultaneously with preheating devices; 4. Avoid frequent use of low-temperature starting fluid. The method for using low-temperature starting fluid is: Remove the plastic cap, aim at the intake pipe of the air filter, press the nozzle and spray for one to three seconds, then start the car.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.