Is GAC Trumpchi GS4 a Joint Venture or Domestic Vehicle?

1 Answers
MacJonathan
07/30/25 3:35am
GAC Trumpchi GS4 is a domestic vehicle, which is a compact SUV under the GAC Trumpchi brand. GAC Trumpchi is an independent brand and one of the mid-to-high-end sedan series of GAC Group. This series of models inherits the excellent genes of European high-end brands in terms of handling, comfort, and active safety. The Trumpchi GS4 is the first SUV model of the Trumpchi 2.0 era, with dimensions of 4510mm in length, 1850mm in width, and 1677mm in height, and a wheelbase of 2650mm. The vehicle adopts a passenger-first design philosophy, creating flexible and versatile space combinations, which greatly expands the seating and storage space to meet the diverse storage needs and lifestyles of passengers.
Was this review help?
19
0
Share
More Forum Discussions

What Are the Techniques for Starting a Car on a Slope?

Car slope starting techniques are: 1. Handbrake method - After stopping on the slope, keep the foot brake, press the clutch, pull the handbrake tight and then release the foot brake, rev the engine, slowly release the clutch, and release the handbrake to complete the slope start; 2. Semi-clutch method - While keeping the foot brake, slowly release the clutch until the car body shakes, then release the brake and press the accelerator; 3. Heel-toe method - Use the heel to press the brake and the toe to press the accelerator, rev the engine while slowly releasing the clutch with the left foot, and when the car body shows a tendency to move forward, lift the right heel off the brake and continue to accelerate while releasing the clutch. Reasons for stalling during slope starting: 1. Releasing the clutch too quickly at the start without matching the throttle; 2. During semi-clutch starting, failing to release the handbrake when reaching the semi-clutch point will cause the car to stall.
8
4
Share

How Many Kilometers Should a Car's Brake Pads Be Replaced?

Car brake pads need to be replaced after driving 40,000 to 50,000 kilometers. Below is relevant knowledge about brake pads: Introduction to Car Brake Pads: Brake pads, also known as brake linings, generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting the temperature distribution during coating. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. Causes of Brake Pad Wear: Inferior materials and structures of brake discs or drums can lead to premature wear of brake pads. Long-term damage to the brake calipers in the braking system can cause the brakes to not release properly, resulting in prolonged dragging between the pads and discs (or drums) and excessive wear. The use of substandard materials in brake pads and an unreasonably low design density of the friction layer are also contributing factors to severe brake pad wear. Additionally, original brake pads with a small design area, long-term high-speed driving, frequent braking, overloading, and prolonged use under high temperatures are major causes of severe brake pad wear.
20
0
Share

What is the cause of the squeaking noise from the front passenger seat in the 10th-generation Accord?

The reason for the squeaking noise from the front passenger seat in the 10th-generation Accord may be loose seat screws. It is recommended to visit a repair shop to check if the seat screws are properly fastened. Car seats can be categorized by shape into split seats and bench seats, by function into fixed, removable, and adjustable seats, and by passenger capacity into single, double, and multi-passenger seats. Taking the 10th-generation Accord 2018 Hybrid 2.0L E-CVT Base Model National VI as an example, its dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm, a fuel tank capacity of 48.5 liters, a curb weight of 1548kg, and the body structure is a 4-door 5-seater sedan.
12
4
Share

What causes a diesel engine to lack power when accelerating?

The reason a diesel engine lacks power when accelerating is that either the throttle position sensor or the intake pressure sensor has malfunctioned. The throttle position sensor and intake pressure sensor are crucial sensors for detecting engine load. If either fails, the engine control unit (ECU) can use substitute values to keep the engine running, but performance will be significantly degraded, with varying symptoms depending on the severity of the damage. The working principle of a diesel engine differs somewhat from that of a gasoline engine. A four-stroke gasoline engine has a power stroke, where the spark plug ignites the air-fuel mixture in the combustion chamber at the end of the compression stroke, causing the mixture to burn. The burning mixture then pushes the piston downward, enabling the engine to produce power.
11
1
Share

What brand of car is the Hellcat?

The Hellcat is a model under the Dodge Challenger brand. Here is more information about the Dodge Challenger: 1. The Dodge Challenger is a muscle car introduced by Chrysler. The first generation was launched in 1970, and the third generation was introduced in 2009. 2. To commemorate the 40th anniversary of the first muscle car, Dodge released a special edition named "Furious Fuschia" based on the 2010 Challenger. It offers two powertrain configurations: R/T Classic and SRT8. The special edition Challenger SRT8 features unique chrome quad exhaust pipes, while the Challenger R/T has dual exhaust pipes. Inside, the special edition models come with pearl-white two-tone seats, and the manual version is equipped with a retro-style "pistol grip" shifter.
12
4
Share

How often should a small car undergo inspection and testing?

Small cars require inspection every 6 years, with testing every 2 years within the first 6 years. By the 6th year, an on-site inspection is required. The annual inspection items include: 1. Checking whether the engine, chassis, body, and their accessories are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records; 2. Verifying whether the vehicle's braking performance, lighting, exhaust, and other safety features comply with relevant regulations. Vehicle annual inspection refers to the annual examination of vehicles that have obtained official license plates and registration certificates, conducted according to the technical conditions for safe operation of motor vehicles. Its purpose is to check the main technical conditions of the vehicle, encourage enhanced vehicle maintenance, ensure the vehicle is always in good condition, and guarantee driving safety.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.