Is GAC Trumpchi a Domestic or Joint-Venture Car Brand?

1 Answers
KimberlyDella
07/29/25 5:27pm
GAC Trumpchi is a domestic car brand. The models under GAC Trumpchi include: GAC Trumpchi GS3, GAC Trumpchi GS8, GAC Trumpchi GA8, GAC Trumpchi GS5, GAC Trumpchi GA6, and others. Taking the 2021 GAC Trumpchi GS3 as an example, it is a compact SUV with body dimensions of: length 4350mm, width 1825mm, height 1685mm, a wheelbase of 2560mm, and a curb weight of 1347kg. The 2021 GAC Trumpchi GS3 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 163PS, a maximum torque of 235Nm, and a maximum power of 120kW, paired with a 6-speed manual transmission.
Was this review help?
6
2
Share
More Forum Discussions

What Do the Letters on Michelin Tires Mean?

An example to illustrate the meanings of the numbers and letters in a Michelin tire model: 225/60R1799H. 1. 225: Represents the section width, simply understood as the width of the tire tread. 2. 60: Represents the aspect ratio, simply understood as the height of the tire sidewall. 3. R: Represents the tire type code, where R stands for radial tire. 4. 17: Represents the rim diameter, indicating the tire is suitable for 17-inch rims. 5. 99: Represents the load index of the tire, which is the maximum weight the tire can bear. 99 corresponds to a maximum load capacity of 775KG. 6. H: Represents the speed rating of the tire, which is the maximum speed the tire can handle. H corresponds to a maximum speed of 210KM/H.
20
1
Share

What are On-Demand 4WD, Part-Time 4WD, and Full-Time 4WD?

Here is the relevant introduction to Part-Time 4WD, Full-Time 4WD, and On-Demand 4WD: 1. Part-Time Four-Wheel Drive: This means the driver can choose between four-wheel drive (4WD) and two-wheel drive (2WD). The switching mode is usually controlled via a knob or lever. 2. Full-Time Four-Wheel Drive: Unlike Part-Time 4WD, Full-Time Four-Wheel Drive (AWD) means all four wheels are always driven, whether driving straight or turning. It also generally allows adjusting the power distribution ratio between the front and rear drive wheels based on driving conditions. 3. On-Demand Four-Wheel Drive: This refers to a drive system where the vehicle automatically uses two-wheel drive when 4WD is not needed and switches to four-wheel drive when necessary.
6
2
Share

What are the precautions for replacing parts?

The precautions for replacing parts are: 1. Refer to the maintenance manual when replacing parts; 2. Pay attention to the specifications of the screws and the force used, and tighten the screws after proper assembly; 3. Pay attention to the assembly sequence and cleanliness; 4. Check if the part's trademark and identification are complete, if the outer packaging is intact, and if the printing on the packaging box is clear; 5. Pay attention to the quality of the parts, carefully inspect for rust spots, cracks, and deformation defects before use; 6. When replacing gears, double-row sleeve roller chains in the transmission box, and the driving and driven sprockets, they should be replaced in pairs; 7. When replacing the cylinder liner, the piston and piston rings should also be replaced simultaneously.
2
1
Share

What is the Correct Start and Stop Method for Automatic Transmission?

Automatic transmission vehicles should be started and stopped as follows: 1. Turn on the ignition, press the foot brake to start the engine, shift to D gear, release the parking brake, and then release the foot brake to start moving; 2. Press the foot brake, shift to N gear, engage the parking brake, release the foot brake, and then turn off the engine and shift to P gear to park. Precautions for shifting gears in automatic transmission vehicles: 1. Ensure the gear is in N or P position before starting the engine, and remember to press the brake pedal when starting; 2. Gear shifting should be timely, accurate, decisive, and quick, avoiding any delay; 3. Upshift after accelerating, downshift after decelerating; 4. Use D gear for driving on straight and flat roads; 5. No need to press the shift button when switching between N, D, and 3 gears.
2
1
Share

What engine does the Zotye T300 use?

Zotye T300 uses a 1.5L naturally aspirated engine and a 1.5L turbocharged engine, both of which adopt multi-point electronic fuel injection technology with aluminum alloy cylinder heads and cast iron cylinder blocks, paired with either a 5-speed manual transmission or a CVT transmission. The Zotye T300 is a compact SUV with dimensions of 4405mm in length, 1830mm in width, and 1640mm in height, and a wheelbase of 2610mm. In terms of exterior design, the fog lights of the Zotye T300 are adorned with chrome trim borders, echoing the shape of the LED daytime running lights, and feature a reticulated pattern inside, showcasing excellent design aesthetics and refinement. Both the front and rear seats offer ample space, and the storage compartment configurations are also very comprehensive.
10
1
Share

What brand is the engine of the Zotye T700?

The engine of the Zotye T700 is from Mitsubishi, with a maximum power of 190 kW and a peak torque of 250 Nm. The Mitsubishi engine, developed by Mitsubishi Corporation, utilizes GDI (Gasoline Direct Injection) technology, which involves injecting gasoline directly into the cylinders. This enables high responsiveness and precise fuel control. The Zotye T700 is manufactured by Zotye Auto, with body dimensions of 4748 mm in length, 1933 mm in width, and 1697 mm in height, and a wheelbase of 2850 mm. The front fascia features a large hexagonal black starry sky-style grille design, paired with LED headlights, creating an excellent visual extension effect.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.